Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-89 Add a Control Carrier (Add Duplication) 
6
Figure 6-31. TDM/LAN Connections for High-Reliability PPN
9.Connec t the loose end of the TDM/LAN c ab le (b etween the “ A”  and  “ B”  
c arriers) to the p in-field  b loc k marked “ TDM/LAN”  on the left sid e of the 
“B” carrier (See Figure 6-31
 and Table 6-8). The other end  remained  
c onnec ted...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-90 Add a Control Carrier (Add Duplication) 
6
10.Connec t the loose end of the TDM/LAN c ab le (b etween the “ C”  and  “ B”  
c arriers) to the p in-field  b loc k marked “ TDM/LAN”  on the right sid e of the 
“B” carrier (See Figure 6-31
 and Table 6-8). The other end  remained  
c onnec ted  to the “ C”  c arrier when the old c arrier was removed...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-91 Add a Control Carrier (Add Duplication) 
6
Figure 6-32. ICC Connections for R8r Control Carrier
15.Install the front trim p late on the “ B”  c arrier.
16. Install the new p ower units into the “ B”  c arrier. The 631DA1 or 644A is 
installed  on the left sid e, while the 631DB1 or 645B and  the 649A are 
installed  on the rig ht side.
17. Connec...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-92 Add a Control Carrier (Add Duplication) 
6
Relocate Port Carrier B
Refer to Add a Switch Node Carrier (High or Critical Reliability) to reloc ate the 
removed port carrier.
Connect Management Terminal or PC
1.Behind  c ontrol c arrier “ A,”  disc onnec t the manag ement terminal or PC 
c ab le from the “ TERM”  c onnec tor, and  rec onnec t the c...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-93 Add a Control Carrier (Add Duplication) 
6
Restart DEFINITY LAN Gateway System
1. Log  onto the DEFINITY LAN Gateway.
2. When the main menu ap p ears, selec t 
Maintenanc e.
3. Select 
Reset System from the Maintenanc e menu.
4. Select 
Restart System from the Reset System menu.
Enable SPE Duplication
1. If not also d up lic ating  switc h node c...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-94 Add a Switch Node Carrier (Standard Reliability) 
6
Add a Switch Node Carrier (Standard 
Reliability)
To upgrade to a standard reliability R8r with Center Stage Switch (CSS), a switch 
nod e c arrier is ad d ed  either to an emp ty “ E”  c arrier p osition of an existing  
multic arrier p ort network or to the “ D”  c arrier position.
NOTE:
To...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-95 Add a Switch Node Carrier (Standard Reliability) 
6
Save Translations
1. Log  in at the manag ement terminal.
2. Type save translation disk
 and press 
En te r. This instruc ts the system to 
take all translation information in memory and  write it to the d isk.
3. If the system c ontains a TN750/B Announc ement c irc uit p ac k, type 
display...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-96 Add a Switch Node Carrier (Standard Reliability) 
6
Shut Down DEFINITY AUDIX System
1. Shut down the AUDIX assemb ly and  allow the d isk to c omp letely sp in 
d own. Refer to ‘‘DEFINITY AUDIX Power Procedures’’ on page 6-141
.
!WARNING:
Neg lec ting  to shut d own an AUDIX assembly b efore p owering  d own 
the system c ab inet where it resides...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-97 Add a Switch Node Carrier (Standard Reliability) 
6
Remove Port Carrier D
Skip these steps if a switch node carrier is being added to an empty carrier 
p osition.
NOTE:
Note the p osition of the TDM/LAN c ab les b efore d isc onnec ting .
1.If a switc h node c arrier is b eing  installed  in the “ D”  p osition of an EPN, 
remove the TDM/LAN c ab...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-98 Add a Switch Node Carrier (Standard Reliability) 
6
Figure 6-33. Locations of Ground JumpersFigure Notes
1.Port Carrier (“ C” Position)
2. Ground  Jump ers
3. Control Carrier (“ A”  Position)4. Switc h Nod e Carrier (“ D”  Position)
5. Switc h Nod e Carrier (“ E”  Position)
6. Cabinet with standard  fan unit and  c arrier
7. Cabinet with enhanc ed...