Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-59 Add IP Interface Assembly 
6
Connect the Modem
NOTE:
These instruc tions are for c onnec ting  the U.S. Rob otic s modem sup p lied  to 
U.S. c ustomers only. If using  a d ifferent mod em, follow the manufac turer’s 
instruc tions on c onnec ting  the mod em.
1. Connec t the RS232 p ort of the mod em to the MODEM c onnec tor of the 
TN802B...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-60 Add IP Interface Assembly 
6
Connect the Monitor, Keyboard, and Mouse
NOTE:
Only make these c onnec tions if ad ministered  loc ally. Not nec essary if 
ad ministered  remotely.
You must c onnec t these b efore inserting  the TN802B IP Interfac e.
1. Attac h a VGA monitor to the VGA c onnec tor of the TN802B IP Interfac e 
external c ab le assemb...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-61 Add IP Interface Assembly 
6
Connect the Ethernet
1. Connec t the network c ab le to the ETHERNET c onnec tor on the TN802B 
external c ab le assemb ly.
NOTE:
You need  a CAT5 or better c ab le for 100-Mb yte operation.
Install the Circuit Pack
!CAUTION:
When add ing  or rep lac ing  any hard ware, b e sure to g round  yourself against 
elec...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-62 Add IP Interface Assembly 
6
Figure 6-26. TN802B IP Interface faceplate
NOTE:
To p rop erly seat the c irc uit p ac k, p ush firmly on the front of the fac ep late 
until the latc h reac hes the b ottom rail of the c arrier. Then c lose the latc h 
until it is fully eng ag ed .
1. Insert the TN802B IP Interfac e into the rig htmost of the three...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-63 Add IP Interface Assembly 
6
Figure 6-27. J58890MA-1 L30 IP Interface Assembly
Test the Modem
1. Check for dial tone.
2. Contac t Luc ent Tec hnolog ies Customer Sup p ort and  ask a rep resentative 
to d ial into your IP Interfac e server. 
Administer the IP Interface
Ad minstration is d one either loc ally or remotely. If ad ministered  loc...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-64 Add IP Interface Assembly 
6
Administration Steps
1. Log in as craft
.
2. Type change circuit-pack
 and  p ress 
En te r.
3. Chec k the Cod e c olumn to see if the slots ab ove the TN802B say 
DSMAPD or MEDPRO.
.
4. If MEDPRO, g o to the entry just ab ove the TN802B that says MEDPRO.
5. Type DSMAPD, and press 
En te r. Chang ing the one entry...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-65 Add IP Interface Assembly 
6
If administered  loc ally on a monitor, keyb oard, and  mouse:
1. Press 
CTRL, ALT, and  DEL simultaneously.
2. Type administrator
 in the User Name
 field .
3. Type iptrunk
 in the Password
 field  and  c lic k OK
. 
4. After log g ing  on for the first time, c hang e the ad ministrator p assword and , 
if d esired ,...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-66 Add IP Interface Assembly 
6
Assign Server and Domain Names
The Windows NT server identifies servers using a server name plus a domain 
name that loc ates the named  server in a p artic ular p art of the network. The 
TN802B IP Interfac e is ship p ed  with generic  server and  d omain names. Assig n 
rep lac ement names that are meaning ful...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-67 Add IP Interface Assembly 
6
5. Verify that the Adapter
 drop  d own menu lists 2 DEC Ethernet ad ap ters.
!CAUTION:
Do not c hange any setting s on the ad ap ter lab eled  [ 1]  for any 
reason.
6. Selec t the DEC Ethernet ad ap ter lab eled  [ 2] . 

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-68 Add IP Interface Assembly 
6
7. Typ e a valid  IP ad d ress for the IP Interfac e server in the IP Address:
 
field .
8. Typ e the ap p rop riate sub net mask in the Subnet Mask:
 field. 
NOTE:
Not all networks req uire step s 9 throug h 18. Chec k with the loc al 
network ad ministrator to determine whic h are req uired .
9. If you use g ateways,...