Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-39 Remove an EPN Cabinet from an Existing System 
6
All Installations
1. When the system reset is finished, type status port-network 2
 and press 
En t e r. The Port Network Status sc reen ap p ears. Verify that PNC Ac tive is 
“ up ”  and that the Servic e State is “ in.”  
2. A Span LED, on the front of the DS1 Converter circuit pack, must be off...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-40 Remove an EPN Cabinet from an Existing System 
6
9. Type change system-parameters features
 and  p ress En t e r. Use this 
sc reen to c hang e the TTI field b ac k to its p revious value b efore the 
up g rad e.
10. When finished , p lac e d ust c overs over all exp osed  fib er c oup ling s that 
remain after the fib er op tic  c ab les are...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-41 Add External Modem to EPN 
6
Add External Modem to EPN
U.S. Robotics Model USR 33.6 EXT External 
Modem
Figure 6-18. Connect External Modem to EPN
1. Connec t an RS-232 c ab le to the modem. See Figure 6-18
.
NOTE:
In the following  step s, a PC with Wind ows 95 or Wind ows NT 4.0 may 
b e sub stituted for the d umb  terminal. Use the Hyp...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-42 Add DCS Interface 
6
Add DCS Interface
Systems in a Distrib uted  Communic ations System (DCS) network are 
interc onnec ted b y b oth tie trunks (for voic e c ommunic ations) and  d ata links (for 
c ontrol and  transp arent feature information). These d ata links, also c alled  DCS 
sig naling  links, supp ort the feature transp arenc y....

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-43 Add DCS Interface 
6
Install Cables
1. Install c ab le from the c ab inet to a hub  or 110 (p urp le) wall field  as 
req uired. Connec t the 259A c onnec tor to the p ort slot c ontaining the 
Control-LAN circuit pac k. See Figure 6-19
. For a p inout of TN799, see 
Table 6-3
. 
Figure 6-19. Cable Connection for Control-LAN Figure Notes
1. 259A...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-44 Add DCS Interface 
6
Enter Added Translations
1. Get the DOSS order numb er of the upg rad e. Call the reg ional CSA to 
p erform the step s in this sec tion.
2. To enab le DCS, set the DCS
 field  on the System Parameters-Customer 
Options sc reen to y
.
3. Ad minister the other req uired  translation data using  the forms listed  und er 
Distrib...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-45 Add IP Interface Assembly 
6
Add IP Interface Assembly
DEFINITY ECS IP Solutions allows you to send  voic e and  fax from the DEFINITY 
ECS throug h an Internet p rotoc ol (IP) network to other DEFINITY ECSs having  
this feature or to other H.323 V2 c omp liant end p oints. It is imp lemented  using  the 
TN802/B IP Interfac e, whic h is a Wind...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-46 Add IP Interface Assembly 
6
Prepare for Installation
Have the following  eq uip ment on site b efore your ship ment arrives:
nAC p ower outlets for the mod em and  monitor.
nThree unoc c up ied  and  ad joining  p ort slots in the DEFINITY ECS for the 
TN802B IP Interfac e, if need ed.
The TN802B oc c up ies only one slot, b ut it need s the two...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-47 Add IP Interface Assembly 
6
3. Read  and  follow any d irec tions inserted  into the p ac kag e b y the fac tory.
The TN802B external c ab le assemb ly is a bund le of c ab les with an amp henol 
c onnec tor at the end  of the b und le and  various PC-typ e c onnec tors (VGA, 
Universal Serial Bus [ USB] , mouse, keyb oard , Ethernet, mod em, and...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-48 Add IP Interface Assembly 
6
Figure 6-20. TN802B IP Interface External Cable Assembly
Connect the Cables
1. Determine into whic h p ort slots you are p utting the TN799B C-LAN and  
TN802B IP Interfac e c irc uit p ac ks.
NOTE:
Make sure that at least 3 ad jac ent slots are free for the TN802B.
From the rear of the c ab inet:
2. If add ing  a new...