Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-29 Install a New EPN Cabinet in an Existing System 
6
1. At the rear of the Port Carrier in p osition C in Cab inet 1, install a 9823A 
lig htwave transc eiver onto Slot 2 (1C02). See Figure 6-16
.
2. Connec t a 20-foot fib er op tic  c ab le to the TX and  RX c onnec tors on the 
transc eiver. Lab el the c ab le to make the c onnec tions to Cab inet...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-30 Install a New EPN Cabinet in an Existing System 
6
Figure 6-16. Switch-Connected Release 8r with SNC in EPN Figure Notes:
1. Cab inet 1 (PPN)
2. Cab inet 2, 3, and  5 through 16 (MCC or SCC EPNs)3. Cab inet 4 (MCC EPN 
with One Switc h Nod e) 

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-31 Install a New EPN Cabinet in an Existing System 
6
Switch-Connect New EPN to Existing PPN and
EPN (Critical Reliability)
For the following  c onnec tion examp le, the PPN c ab inet is c alled  Cab inet 1, the 
first EPN c ab inet is c alled  Cab inet 2, and  the EPN c ab inet c ontaining  the Switc h 
Nod e Carrier is c alled  Cab inet 4. 
NOTE:...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-32 Install a New EPN Cabinet in an Existing System 
6
14. At the rear of the Exp ansion Control Carrier in p osition A in Cab inet 2, 
install a lig htwave transc eiver onto Slot 1 (2A01).
15. Connec t a 20-foot (6 m) fib er op tic  c ab le to the TX and  RX c onnec tors on 
the transc eiver. Be sure to lab el the c ab le.
16. At the rear of the...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-33 Install a New EPN Cabinet in an Existing System 
6
Figure 6-17. Switch-Connected Release 8r with SNC in EPN
27. Connec t an H600-278 Metallic  Cab le from Slot 2 in the Port Carrier in 
p osition B in Cab inet 4 (4B02) to Slot 19 on the Switc h Node Carrier in 
p osition D in Cab inet 4 (4D19).
NOTE:
Both fib ers from eac h PN must c onnec t to...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-34 Remove an EPN Cabinet from an Existing System 
6
Remove an EPN Cabinet from an 
Existing System
All Systems
Before starting  the EPN removal p roc ess, p erform the following :
NOTE:
If you d o not d isab le the TTI, the translations c an be c orrup ted .
1. Type change system-parameters features
 and  p ress 
En te r . Use sc reen 2 
to d isab le...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-35 Remove an EPN Cabinet from an Existing System 
6
3. Type change fiber link
 and press En t e r. The Fib er Link Ad ministration 
sc reen ap p ears. Use this sc reen to unad minister fib er links, eac h of whic h 
is identified  b y a fiber numb er. 
a. The Is one endpoint remoted via DS1 Converter 
complex?
 field must remain administered.
b ....

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-36 Remove an EPN Cabinet from an Existing System 
6
All Installations
1. When the system reset is finished, type status port-network 2
 and press 
En t e r. The Port Network Status sc reen ap p ears. Verify that PNC Ac tive is 
“ up ”  and that the Servic e State is “ in.”  
2. A Span LED, on the front of the DS1 Converter circuit pack, must be off...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-37 Remove an EPN Cabinet from an Existing System 
6
9. Type change system-parameters features
 and  p ress En t e r. Use this 
sc reen to c hang e the TTI field b ac k to its p revious setting  b efore the 
up g rad e.
10. When finished , p lac e d ust c overs over all exp osed  fib er c oup ling s that 
remain after the fib er op tic  c ab les are...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-38 Remove an EPN Cabinet from an Existing System 
6
c . In the DS1CONV Board Location
: field, remove the c ab inet, 
c arrier, and  slot that id entifies the physic al loc ation of DS1 
Converter c irc uit p ac k in the first end p oint of the d up lic ate fib er link. 
End p oint-1’s d uplic ate along  with Endp oint-2’s d up lic ate make up  
the...