Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-49 Add IP Interface Assembly 
6
Connect the Modem
NOTE:
These instruc tions are for c onnec ting  the U.S. Rob otic s modem sup p lied  to 
U.S. c ustomers only. If using  a d ifferent mod em, follow the manufac turer’s 
instruc tions on c onnec ting  the mod em.
1. Connec t the RS232 p ort of the mod em to the MODEM c onnec tor of the 
TN802B...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-50 Add IP Interface Assembly 
6
Connect the Ethernet
1. Connec t the network c ab le to the ETHERNET c onnec tor on the TN802B 
external c ab le assemb ly.
NOTE:
You need  a CAT5 or better c ab le for 100-Mb yte operation.
Install the Circuit Packs
!CAUTION:
When add ing  or rep lac ing  any hard ware, b e sure to g round  yourself against 
elec...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-51 Add IP Interface Assembly 
6
Figure 6-22. TN802B IP Interface faceplate
NOTE:
If rep lac ing  the existing  TN799 c irc uit p ac k, remove it first and rep lac e it 
with the new one.
1. Insert the TN799B c irc uit p ac k into the p ort slot id entified  earlier.
NOTE:
To p rop erly seat the c irc uit p ac k, p ush firmly on the front of the 
fac...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-52 Add IP Interface Assembly 
6
2. Insert the TN802B IP Interfac e into the rig ht most of the three slots you 
reserved  for it (see Figure 6-23
) and  seat it p roperly.
When you p lug  in the TN802B IP Interfac e Assemb ly, the c irc uit p ac k 
starts to b oot and  the LCD read s PC Boot
. The c irc uit p ac k reboots 
automatic ally, and after...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-53 Add IP Interface Assembly 
6
Administer the TN799B C-LAN
Refer to the DEFINITY Enterp rise Communic ations Server Ad ministration for 
Network Connec tivity
.
Administer the IP Interface
Ad ministration is usually d one remotely; c all your servic e rep resentative to start 
the process.
Administration Steps
NOTE:
Refer to the DEFINITY Enterp rise...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-54 Add IP Interface Assembly 
6
.
6. If not, typ e MEDPRO in the slot just ab ove TN802B slot and  p ress En t e r. 
Chang ing the one entry automatic ally c hang es the entry ab ove it. If it is in 
IP Trunk mod e, you g et the following error messag e:
MedPro type requires TN802 with application. Type 
MEDPRO on circuit-packs form.
7. Type change...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-55 Add IP Interface Assembly 
6
.
Test the External Connection to the LAN
To test the external IP c onnec tions, p ing the IP Interfac e server, and  p ing  a 
known c omp uter c onnec ted  to your network. If everything  is c onfig ured c orrec tly, 
the Result
 c olumn on the Ping  Results sc reen read s pass
. If it read s abort
, 
verify the...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-56 Add IP Interface Assembly 
6
3. Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and p ress En t e r. 
Th e  v a r i a b l e  
nnn.nnn.nnn.nnn is the IP ad d ress of another c omp uter 
b eyond  the g ateway and  
UUCSS is the c ab inet, c arrier, and  slot of the 
TN802B IP Interfac e.
The TN802B IP Interfac e is now installed  in the DEFINITY c...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-57 Add IP Interface Assembly 
6
Check your Shipment
When your DEFINITY ECS ord er arrives at the c ustomer’s site, c hec k the 
c ontents (see Table 6-6
).
1. Insp ec t the ship p ing  c arton for d amag e b efore op ening  it. If the b ox is 
damaged, 
do not open it. Inform the ship p ing  c omp any, and  ask for 
instruc tions on filing a c laim....

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-58 Add IP Interface Assembly 
6
Figure 6-24. TN802B IP Interface External Cable Assembly
3. Read  and  follow any d irec tions inserted  into the p ac kag e b y the fac tory.
Connect the Cables
1. Determine into whic h p ort slot you are p utting  the TN802B IP Interfac e.
NOTE:
Make sure that at least 3 ad joining  slots are free.
2. From the rear...