Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 391

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-129 Add MCC Port Carriers 
6
Save Translations
1. Log  in at the manag ement terminal.
2. If the system is hig h- or c ritic al-reliab ility, typ e status spe
 and press 
En te r  
to verify that the stand b y SPE is refreshed  and  that the stand b y d isk is in 
servic e.
3. Type save translation [spe-a 
or both] disk
 and press 
En t e r. This 
c...

Page 392

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-130 Add MCC Port Carriers 
6
Shut Down DEFINITY AUDIX System
1. If a DEFINITY AUDIX resides in the MCC p ort network to b e up g rad ed , 
shut d own the AUDIX assemb ly and  allow the d isk to c ompletely sp in 
d own. Refer to ‘‘DEFINITY AUDIX Power Procedures’’ on page 6-141
.
!WARNING:
Neg lec ting  to shut d own an AUDIX assembly b efore p...

Page 393

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-131 Add MCC Port Carriers 
6
10. Install a 631AR, 631WA1, 631DA1, or 644A p ower unit in the leftmost slot 
and  a 631BR, 631WB1, 631DB1, 645B, or 649A p ower unit in the 
rig ht-most slot of installed  p ort c arrier as follows:
a. Set the c irc uit b reaker on the p ower unit to be ad d ed  to OFF.
b. Move locking slide on power unit to its...

Page 394

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-132 Add MCC Port Carriers 
6
Power Up MCC Port Network
1. At the MCC p ort network, set the main c irc uit b reaker to ON.
2. The system p erforms a level 4 reb ooting  proc ess, load ing  the system 
p rog ram and  d efault translations from the d isk. Reb ooting  takes 5 to 11 
minutes.
3.Refer to “ Initialization and  Rec overy”  and  “ LED Interp...

Page 395

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-133 Add MCC Port Carriers 
6
4. Type first-only 
in this field  to enab le Alarm Orig ination (to the first OSS, 
which should be INADS).
Be sure to typ e y
 in both Cleared Alarm Notification
 and Restart 
Notification
 field s. Press 
En te r.
NOTE:
The INADS Datab ase Ad ministrator enab les Alarm Orig ination as 
p art of the reg istration proc...

Page 396

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-134 Add MCC Port Carriers 
6
Update Port-Assignment Records
1.Up d ate the c ustomer’s p ort-assig nment rec ord s.
Figure 6-49. Blank Carrier Panel (Rear View)
Figure 6-50. Locations of Grounding Jumpers (Small Cabinet)
CABINET
FRAME
RETAINING
PINS
PORT CARRIER B
CONTROL CARRIER A
CABINET
REAR VIEW (COVERS REMOVED)FANS
GROUNDING
JUMPER 

Page 397

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-135 Add MCC Port Carriers 
6
Figure 6-51. Locations of Grounding Jumpers
PORT CARRIER C
PORT CARRIER B
CONTROL CARRIER A
FANS
PORT CARRIER D
PORT CARRIER E
REAR VIEW (COVERS REMOVED)
GROUNDING
JUMPERS
GROUNDING
JUMPERS
CABINET 

Page 398

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-136 Add MCC Port Carriers 
6
Figure 6-52. TDM/LAN Bus Connections for Standard Reliability R8r PPN
NOTE:
On p ort c arrier J58890BB-1, c onnec t the TDM c ab le or TDM terminator to 
slot 02. On p ort c arriers J58890BB-2 and  J58890BB-3, c onnec t the TMD 
c ab les or TDM terminator to slot 01. If the p ort c arrier has J58890BB-1 and  
J58890BB-2...

Page 399

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-137 Add MCC Port Carriers 
6
Figure 6-53. TDM/LAN Bus Connections for Critical-Reliability PPN
NOTE:
On p ort c arrier J58890BB-1, c onnec t the TDM c ab le or TDM terminator to 
slot 02. On p ort c arriers J58890BB-2 and  J58890BB-3, c onnec t the TMD 
c ab les or TDM terminator to slot 01. If the p ort c arrier has J58890BB-1 and  
J58890BB-2 stenc...

Page 400

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Adding or Removing Cabinet Hardware 
6-138 Add MCC Port Carriers 
6
Figure 6-54. TDM/LAN Bus Connections for Standard- or High-Reliability 
EPN
CONTROL CARRIER
SLOT 21
B
A
D
PORT CARRIER
PORT CARRIER SLOT 21
PORT CARRIER
TERMINATOR TDM BUS
SLOT 21
E
(ZAHF4)
SLOT 21
C
REAR VIEWPORT CARRIER (ZAHF4)
SLOT 21
EXPANSIONJ58890AF J58890BB
J58890BB
J58890BB
J58890BB SEE NOTE SEE NOTE SEE NOTE SEE...
Start reading Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

All Lucent Technologies manuals