Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

Fiber Link Administration 
A-1 Administer Fiber Links 
A
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
A
Fiber Link Administration
This ap p end ix desc rib es the step s req uired  to ad minister fib er links on G3rV4 
and  later systems.
Before starting  the ad ministration p roc ess, verify the following :
1. Be sure all fiber op tic  transc eivers and  all fib er op tic  c ab les are c orrec tly 
installed  on the DS1 and /or DS1...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Fiber Link Administration 
A-2 Administer Fiber Links 
A
Circuit Pack Form
After installing  the eq uip ment (inc lud ing  c irc uit p ac ks), the c irc uit p ac ks must b e 
ad ministered  
before the fib er link is ad ministered . Refer to DEFINITY Enterp rise 
Communic ations Server Release 8 Ad ministrator’s Guid e
 for more information.
The following information d esc ribes general c...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Fiber Link Administration 
A-3 Administer Fiber Links 
A
Administer Fiber Links on Simplex Systems 
Ad minister the TN570 Exp ansion Interfac e and  the TN574 or TN1654 DS1 
Converter circuit packs. 
1. Type change circuit packs
 and press 
En te r. Sc roll throug h the p ag es on 
the form until the c arrier c ontaining the new c irc uit p ac ks d isp lays on the 
sc reen. 
2. Enter the...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Fiber Link Administration 
A-4 Administer Fiber Links 
A
T1 Installations Only
1. The Framing Mode:
 field  is d isp lay only and  shows the hard ware setting .
2. The DS1CONV-1 Line Compensation:
 and the DS1CONV-2 Line 
Compensation:
 field s are d isp lay only and  show the hard ware setting . 
3. In the Facility A Circuit ID:
 field , enter an op tional fac ility name 
that is uniq ue...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Fiber Link Administration 
A-5 Administer Fiber Links 
A
Administer Fiber Links on Duplex Systems 
All non-d up lic ated  Switc h Nod e Interfac es to Switc h Nod e Interfac e fiber links 
are automatic ally dup lic ated . When PNC Dup lic ation is enab led  on the 
System-Parameters Customer-Op tions form, the following  ad ministration forms 
change:
nCab inet Form — Ad d itional field...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Fiber Link Administration 
A-6 Administer Fiber Links 
A
d. The DS1CONV Board Type
: field  is display only and shows the 
type of DS1 Converter c irc uit p ac k in End p oint-1. The c irc uit p ac k 
type in End p oint-1 (A-PNC) and  End p oint-1 (B-PNC) must matc h.
e. In the Is one endpoint remoted via a DS1 Converter 
Complex?
 field , typ e y
 to sp ec ify that a DS1 Converter c...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Fiber Link Administration 
A-7 Administer Fiber Links 
A
T1 Installations Only
1. The Framing Mode:
 field  is d isp lay only and  shows the hard ware setting .
2. The DS1CONV-1 Line Compensation:
 and the DS1CONV-2 Line 
Compensation:
 field s are d isp lay only and  show the hard ware setting . 
3. In the Facility A Circuit ID:
 field , enter an op tional fac ility name 
that is uniq ue...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Fiber Link Administration 
A-8 Administer Fiber Links 
A
Fiber Link Administration Form
This form ad ministers fib er links, eac h of whic h is identified  b y a fiber numb er.
NOTE:
Fib er link ad ministration only ap p lies to R5r and  later c onfig urations.
Port networks (PNs) are c onnec ted via d irec t fib er link c onnec tions or throug h a 
c enter stag e switc h (CSS) to p rovid...

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Fiber Link Administration 
A-9 Administer Fiber Links 
A
PNCs have three d ifferent reliab ility c onfig urations (one for eac h system reliability 
configuration) as follows:
Simplex PNC
For Simp lex PNC, PNC Dup lic ation is d isab led  on the System-Parameters 
Customer-Op tions form and  Op eration of Dup lic ation is d isab led  on the 
Dup lic ation-Related  System-Parameters form....

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Fiber Link Administration 
A-10 Administer Fiber Links 
A
Form instructions
Page 1 of the form
Screen 6-1. Fiber Link Administration form
Basic Fiber Link Administration. 
The following fields appear:
nFiber Link #
 — Disp lay-only field . From the c ommand  line, enter a 1- to 
3-d ig it numb er to uniq uely id entify a switc h c onnec tion in the system and 
its d up lic ate if ap prop...