Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
697 Hospitality 
17
Field descriptions for page 1
Screen 96. Hospitality 
Message Waiting Configuration
This indicates whether message waiting notification requests and changes are 
being exchanged between the server and the PMS.
Controlled Restrictions Configuration
This indicates whether controlled restriction information is being exchanged 
between the server and the PMS. 
Valid entries Usage
act-nopms...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
698 Hospitality 
17
Housekeeper Information Configuration
This indicates whether housekeeper information is being exchanged between the 
server and the PMS. 
Number of Housekeeper ID Digits
Extension of PMS Log Printer 
This is a valid data extension number that is assigned to the data module 
connected to the PMS/Log printer. 
Extension of Journal/Schedule Printer
This is a valid data extension number that...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
699 Hospitality 
17
Client Room Coverage Path Configuration
This indicates whether the server and the PMS exchange coverage path 
information for guest stations. 
Default Coverage Path for Client Rooms
This applies only to stations with a “client room” class of service in the 
“occupied” mode. This field is used for transparent or ASCII mode. The value in 
this field is also used during a translation save...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
700 Hospitality 
17
PMS Protocol Mode
This indicates the message protocol mode used between the server and PMS. 
Coordinate this option with your PMS vendor.
ASCII mode
The PMS Protocol Mode field must be 
transparent. 
Seconds Before PMS Link Idle Timeout 
 
Milliseconds Before PMS Link Acknowledgment 
Timeout 
This regulates how quickly the system responds to a message from the PMS (also 
known as “pace...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
701 Hospitality 
17
PMS Link Maximum Retransmission Requests
Take Down Link for Lost Messages
 
Field descriptions for page 2
Screen 97. Hospitality screen
Dual Wakeup
Daily Wakeup
Valid entries Usage
1
 to 5Enter the number of times that the server will allow the PMS to 
request acknowledgment for a message that it sent.
Valid entries Usage
y/n
  Enter y to cause the PMS link to come down if messages are...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
702 Hospitality 
17
VIP Wakeup
VIP Wakeups Per 5 Minutes
This field appears only if VIP Wakeup is  y.
Room Activated Wakeup with Tones
!CAUTION:
Set the following reports for a time other than when the system does its scheduled 
maintenance tests. To make sure the times do not overlap, enter the command display 
system-parameters maintenance and check when the system is set to run tests.
Time of Scheduled...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
703 Hospitality 
17
Time of Scheduled Emergency Access 
Summary Report
This indicates the time of day that the Emergency Access Summary Report will be 
printed on the Journal/ Schedule printer. 
Announcement Type
This indicates the type of automatic wakeup announcement the hotel guest will 
receive. Allowable entries are as follows:
NOTE:
One of the following four fields appears depending on what data is...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
704 Hospitality 
17
Auxiliary Board for Announcement
This field appears only when the 
external announcement type is used. This 
indicates the equipment location of an auxiliary trunk circuit that connects to the 
external announcement equipment. Enter a 5-character circuit pack number. 
Integrated Announcement Extension
This field appears only when the integrated announcement type is used. This 
indicates...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
705 Hospitality 
17
Length of Time to Remain Connected to 
Announcement
Enter the length of time in seconds that a hotel guest will be connected to an 
announcement. This applies only after the guest has heard the announcement 
completely one time, but continues to listen. 
Extension to Receive Failed Wakeup LWC 
Messages
This indicates where unsuccessful wakeup LWC messages will be stored. This is 
usually...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
706 Hospitality 
17
Automatic Selection of DID Numbers
This field assigns a 2- or 5-digit number to a guest’s phone number that is not 
associated with the room number.
Number of Digits from PMS
This indicates the number of digits being sent from the PMS to the server to 
identify room numbers. 
NOTE:
If the Number of Digits from PMS field is blank and the PMS Sends Prefix 
field is set to 
n, the server...