Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
667 Feature-Related System Parameters 
17
Public Network Trunks on Conference Call
Indicates the number of public network trunks allowed on a conference call.
Auto Start
If this field is enabled, the 
START buttons on all attendant consoles are disabled.
Conference Parties with Public Network Trunks
Specifies the maximum number of parties allowed in a conference call involving a 
public network subscriber....

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
668 Feature-Related System Parameters 
17
Night Service Disconnect Timer (seconds)
Enter a number or blank to indicate how long a trunk call can be unanswered 
during night service before being disconnected. The trunk must not have 
Disconnect Supervision for this timer to apply.
Bridging Tone
Short Interdigit Timer (seconds)
Enter a number to limit the time that digit analysis will wait for the next digit...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
669 Feature-Related System Parameters 
17
Unanswered DID Call Timer (seconds)
Enter number or blank to limit how long a DID call can remain unanswered before 
routing to the DID/TIE/ISDN Intercept Treatment feature. This timer interacts 
with the nonadministrable 50 second Wait for Answer Supervision Timer 
(WAST). The WAST timer overrides this field. Thus if this field is set to a value 
equal to or...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
670 Feature-Related System Parameters 
17
Long Hold Recall Timer (seconds)
You can administer the system to remind a user that a call has been on hold for too 
long. 
Reset Shift Timer (seconds)
Used only for station-to-station calls or private network calls using ISDN trunks.
Station Call Transfer Recall Timer
Allows a user-transferred call (station-to-station, a trunk call, or a DCS call) to 
re-terminate...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
671 Feature-Related System Parameters 
17
Allow ANI Restriction on AAR/ARS
(For Russia only) If a call is placed over a Russian shuttle trunk or a Russian 
rotary trunk via an AAR or ARS entry with the ANI Req field set to 
r, then ANI is 
requested just like a 
y entry. However, if the ANI request fails, the call 
immediately drops. All other trunk types treat the 
r entry as a y.
Transfer Upon Hang-Up...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
672 Feature-Related System Parameters 
17
Abort Transfer
Stops the transfer operation whenever a user presses a non-idle call appearance 
button in the middle of the transfer operation, or when they hang up. If both the 
Abort Transfer and Transfer Upon Hang-Up fields are 
y and you press the 
TRANSFER button and then dial the complete transfer-to number, hanging up the 
phone transfers the call. You must...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
673 Feature-Related System Parameters 
17
Attendant Originated Calls
DTMF Tone Feedback Signal to VRU - 
Connection, Disconnection
This field appears only if DTMF Feedback Signals for VRU on the 
Customer-Options System Parameters screen is 
y.
Field descriptions for page 6
Screen 90. Feature-Related System Parameters screen Valid entries Usage
internal
external
priority
Indicates which type of ringing...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
674 Feature-Related System Parameters 
17
Send Non-ISDN Trunk Group Name as 
Connected Name
Display Connected Name/Number for ISDN DCS 
Calls
Send ISDN Trunk Group Name on Tandem Calls
CPN Replacement for Restricted Calls
CPN Replacement for Unavailable Calls
QSIG TSC Extension
Valid entries Usage
y/n
 Enter y to send a name of the non-ISDN trunk group as the 
connected name when a call routes from ISDN to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
675 Feature-Related System Parameters 
17
Path Replacement with Measurements
MWI - Number of Digits Per AUDIX Subscriber
Appears only if the Basic Supplementary Services field or the ISDN Feature Plus 
field on the System-Parameters Customer-Options screen is 
y. This field appears 
an indication of the number of digits per AUDIX subscriber.
NOTE:
For QSIG-MWI only. These routing digits and inserted digits...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
676 Feature-Related System Parameters 
17
National CPN Prefix
Allows you to apply prefixes to national calling numbers for display at receiving 
phones. This is useful for those phones that use or implement call back features 
based on incoming call numbers. When an ISDN-PRI call arrives, the incoming 
call setup is analyzed for: (1) whether the Type of Address (TOA) is national or 
international, and (2)...