Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
627 DS1 Circuit Pack 
17
Near-end CSU Type
This field appears only when the DS1 circuit pack is a TN767D or TN464E or 
later suffix model, the Bit Rate field is 
1.544 and the Country Protocol field is 1 
(U.S.). This field does not display for all circuit packs.
Alarm When PRI Endpoint Detached
Use this field for DS1 circuit packs connected to Roll-About Video equipment. 
This field appears only when the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
628 DS1 Circuit Pack 
17
Field descriptions for page 2
Screen 76. DS1 Circuit Pack
!CAUTION:
Customers: Do not change fields on this page without assistance from 
Lucent Technologies or your network service provider.
Page 2 does not appear for all DS1 circuit packs. For those circuit packs that 
support it, this page appears only when:
nthe version is V3 or greater
nthe Framing Mode field is esf or the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
629 DS1 Circuit Pack 
17
Send ANSI-T1.403 One-Second Performance 
Reports
This field selects whether your DS1 circuit pack will send error reports to the 
far-end switch. These reports are useful for network management, and are sent at 
1-second intervals when enabled. This field appears only if the Framing Mode 
field is 
esf. It is used only with circuit packs that have an integrated channel 
service unit...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
630 DS1 Circuit Pack 
17
Receive ALBO (Receive Automatic Line 
Build-Out) 
This field increases the strength of incoming signals by a fixed amount to 
compensate for line losses. 
Upon DTE LOS
DTE stands for “Data Terminal Equipment.” This field tells the switch what to do 
if the outgoing signal from the DS1 circuit pack (the data terminal equipment) to 
the network is lost.
Supply CPE Loopback Jack Power...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
631 Extended Pickup Group 
17
Extended Pickup Group
This screen allows grouping of pickup groups into extended pickup groups. This 
allows users to answer calls outside their immediate group. The maximum 
number of groups that can be added to an extended pickup group is 25.
Field descriptions
Screen 77. Extended Pickup Group screen
Extended Group Number
This display-only field shows the number associated...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
632 Extensions Administered to have an MCT-Control Button 
17
Pickup Group Number
This field determines which call pickup groups can answer calls in the extended 
pickup group.
Extensions Administered
to have an MCT-Control Button
This screen lists the extensions that can take control of a Malicious Call Trace 
(MCT) request. In order to give a user the ability to take control of such requests, 
you need to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
633 Feature Access Code 
17
Feature Access Code
This screen assigns feature access codes (FACs) that, when dialed, activate or 
cancel the system features. Each field on this screen has the same valid values, 
which must conform to feature access codes or dial access codes as defined by 
your dial plan.
Field descriptions for page 1
Screen 79. Feature Access Code (FAC) screen 
Abbreviated Dialing List1...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
634 Feature Access Code 
17
Abbreviated Dial - Prgm Group List Access 
Code
Used to enter a group list from a telephone. The user’s extension must be entered 
on the Abbreviated Dial Group List screen in order to program the group list. 
Announcement Access Code
Used to record announcements.
Answer Back Access Code
Used to retrieve parked calls.
Auto Alternate Routing (AAR) Access Code
Used to access AAR....

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
635 Feature Access Code 
17
Call Park Access Code
Used to park an active call, which can then be retrieved from a different station 
using the answer back access code. Do not administer to have the same first digit 
as another feature access code that is longer in length.
Call Pickup Access Code
Used to answer a call directed to a pickup group.
CAS Remote Hold/Answer Hold-Unhold Access 
Code
Used by a...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
636 Feature Access Code 
17
Extended Call Fwd Activate Busy D/A
Used to activate call forwarding from a telephone or remote location.
Extended Call Fwd Activate All
Used to activate call forwarding from a telephone or remote location.
Extended Call Fwd Deactivation
Used to deactivate call forwarding from a telephone or remote location.
NOTE:
An extension must have Station Security Codes administered to use...