Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
597 Data modules 
17
Screen 67. X.25 Adjunct Data Module Table 10. DLDM screen settings for terminating connection to host 
computer
Field on screen Option Comments
Speed All speeds at which 
the computer can 
operate Subject to distance limitations; 
Autoadjust not used 
KYBD Dialing  no
Busy Out -Don’t care
Permit Mismatch - Don’t care
Parity - Don’t care
Dial Echoing - Don’t care 
Disconnect 
Sequence-...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
598 Data modules 
17
Number of Outstanding Frames (w)
Specifies layer 2 window size.
Retry Attempt Counter (N2)
Specifies the number of times to send one frame when this frame is not confirmed 
for a period of time.
Frame Size (N1)
Specifies the number of bytes in a frame.
Retransmission (T1) Timer (1/10 seconds)
The T1 timer is started at the beginning or the end of the transmission of a frame. 
At the end...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
599 Data modules 
17
Number of Outstanding Packets
Specifies the number of packets that can be sent without confirmation.
Restart (T20) Timer (seconds)
The T20 timer is a DTE time-limit started when DTE issues a restart indication 
and terminated when the restart request is received or confirmed.
Reset (T22) Timer (seconds)
The T22 timer is a DTE time-limit started when DTE issues a reset indication and...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
600 Data modules 
17
Fixed TEI
Used with 7500 and World Class BRI Data Modules. Used to indicate whether the 
endpoint has Fixed Terminal Equipment Identifier (TEI) capability. TEI identifies 
a unique access point within a service. For Fixed TEI stations, the TEI must be 
administered. Terminals with automatic TEI capability, the associated TEI is 
assigned by the system.
TEI
Used with 7500 and World Class...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
601 Data modules 
17
Endpt Init
Used with 7500 and World Class BRI Data Modules. Endpoint initialization is a 
procedure, required for multipoint operation, by which User Service Order Profile 
(USOP) is associated with an endpoint on the ISDN-BRI. This association is 
made via the Service Profile Identifier (SPID), administered into the system and 
entered into the ISDN-BRI terminal. For a ISDN-BRI...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
602 Date and Time 
17
Endpt ID
Used with World Class BRI Data Modules. Appears only if the Endpt Init field is 
y. This field provides for multipoint configuration conformance to the Bellcore 
Terminal Initialization procedures. In these procedures, a multipoint configuration 
requires that the last 2 digits of the Service Profile Identifier (SPID) be between 
00 and 63 and be binary unique for each...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
603 Date and Time 
17
Month
Day of the Month
Year
Hour 
The system uses a 24-hour clock. For example, 14:00 is the same as 2:00 p.m.
Minute
Second
This display-only field shows the seconds and cannot be modified. It resets to zero 
when you save the information on this screen.
Valid entries Usage
January
 through DecemberEnter the current month. The system clock uses 
this as the current month.
Valid...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
604 Date and Time 
17
Ty p e
Daylight Savings Rule
This field displays which daylight savings rule is in use for your system. 
Related topics
To update the date and time for the change to or from daylight savings time, use 
the Daylight Saving Rule screen. Refer to ‘‘
Establishing daylight savings rules’’ 
on page 7 for instructions on how to set up daylight savings rules.
Valid entries Usage...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
605 Daylight Savings Rules 
17
Daylight Savings Rules
Use this screen to enter up to 15 customized daylight savings rules. You can 
specify the day, month, date, time, and increment each daylight savings rule goes 
into effect and the day, month, date, and time it stops. Rule 0 makes no adjustment 
to the system clock for daylight savings and cannot be modified. Telephone 
displays are affected by these...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
606 Daylight Savings Rules 
17
Date (Start)
Time (Start)
The system uses a 24-hour clock. For example, 14:00 is the same as 2:00 p.m.
Increment (Start)
Change day (Stop)
Month (Stop)
Date (Stop)
Valid entries Usage
0 
to 31Enter the day of the month you want the clock to move ahead to 
begin daylight savings.
Valid entries Usage
0 
to 23Enter the hour you want the clock to move ahead to begin 
daylight...