Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
577 Data modules 
17
COS
Enter the desired class of service.
Remote Loop-Around Test
Used with Processor/Trunk and X.25 Data Modules. Appears when the Type field 
is 
pdm, tdm, or x.25.
Maintenance Extension
Used with Netcon and Processor Interface Data Modules.
x.25Assigns an X.25 Data Module in G3r configurations for 
communications to Adjuncts and other nodes in a DCS 
network. Refer to DEFINITY ECS...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
578 Data modules 
17
Physical Channel
Used with Netcon and Processor Interface Data Modules. The Physical Channel 
number is referred to on associated system forms as the Interface Link number
.
Board
Used with Announcement Data Modules. Enter the five character announcement 
circuit pack number that identifies the physical circuit pack to which the 
announcement module is connected. You can enter 
X in...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
579 Data modules 
17
Port
Used with 7500, Data Line, Ethernet, Processor/Trunk, PPP, System Port, X.25, 
and World Class BRI Data Modules. Specifies a port location to which the data 
module is connected.
NOTE:
You can enter X in the Port field to indicate that there is no hardware 
associated with the port assignment (also known as administration 
without hardware). These stations are referred to as...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
580 Data modules 
17
MM Complex Voice Ext
Used with 7500 and World Class BRI Data Modules. This field contains the 
number of the associated phone in the multimedia complex. This field appears 
only after you set the Multimedia field to 
y. This field is left blank until you enter 
the data module extension in MM Complex Data Ext on the Station screen.
Secondary data module
Used with Processor/Trunk Data...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
581 Data modules 
17
ITC
(Information Transfer Capability) Used with 7500, Announcement, Netcon, 
Processor/Trunk, and Processor Interface Data Modules. Appears only when the 
Comm Type field is 
56k-data or 64k-data. Indicates type of transmission 
facilities to be used for ISDN calls originated from this endpoint. Does not display 
for voice-only or BRI stations.
TN
Establish Connection
Used with X.25,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
582 Data modules 
17
Enable Link
Used with X.25, Ethernet, Point-to-Point, and Processor Interface data modules. 
Refer to DEFINITY ECS Administration for Network Connectivity for more 
information. This field is in different locations on the screen for different data 
module types.
Node Name
Used with Ethernet and Point-to-Point data modules. Refer to DEFINITY ECS 
Administration for Network Connectivity...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
583 Data modules 
17
Endpoint Type
Used with X.25 Data Modules. An endpoint type is a type of packet switched data 
endpoint that uses X.25 call control procedures. The X.25 Endpoint connects to 
external ports on the PGATE board and to the TDM bus via a DS1 trunk. Ports 
connected to the adjunct endpoint can be either DTEs or DCEs. The type of 
endpoint (DTE or DCE) is administrable on the “data-mod”...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
584 Data modules 
17
Highest PVC Logical Channel
Used with X.25 Data Modules. Specifies how the above endpoint type acts.
Switched Virtual Circuit
Used with X.25 Data Modules.
Digits
Used with Point-to-Point data modules. Refer to DEFINITY ECS Administration 
for Network Connectivity for more information.
Node Name
Used with Point-to-Point data modules. Refer to DEFINITY ECS Administration 
for Network...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
585 Data modules 
17
ABBREVIATED DIALING List1
Used with 7500, Data Line, Netcon, Processor/Trunk, Processor Interface, and 
World Class BRI Data Modules. Supports Data Hot Line. This field can be left 
blank.
SPECIAL DIALING OPTION
Used with 7500, Data Line, Netcon, Processor/Trunk, Processor Interface, and 
World Class BRI Data Modules. Identifies the type of dialing for calls when this 
data module...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
586 Data modules 
17
Hot Line Destination — Abbreviated Dialing Dial 
Code
Used with 7500, Data Line, Netcon, Processor/Trunk, Processor Interface, and 
World Class BRI Data Modules. Appears only when the Special Dialing Option 
field is 
hot-line. Entry in this field supports Data Hot Line.
Default Dialing Abbreviated Dialing Dial Code
Only appears when the Special Dialing Option field is 
default. When...