Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
647 Feature-Related System Parameters 
17
Self Station Display Enabled
Use this field to control the use of the 
INSPECT button for digital display phones.
Self Station Display allows a user to display the primary extension associated with 
a digital display phone. There are two methods: (1) enter a feature access code 
(FAC), and (2) use the 
INSPECT button. In either case, the display shows the 
primary...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
648 Feature-Related System Parameters 
17
Call Park Timeout Interval (minutes)
Off-Premises Tone Detect Timeout Interval 
(seconds)
AAR/ARS Dial Tone Required
A second dial tone provides feedback to the user that additional dialing can occur.
Music/Tone on Hold
If you use equipment that rebroadcasts music or other copyrighted materials, you 
may be required to obtain a copyright license from, or pay fees...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
649 Feature-Related System Parameters 
17
Port
Indicates the port number that provides Music-on-Hold access. This requires a 
port on a TN763 Auxiliary Trunk circuit pack or any supported Analog Line 
circuit pack. Appears when Music/Tone on Hold is 
music.
Music (or Silence) On Transferred Trunk Calls
Valid entries Usage
01
 through 22First and second characters are cabinet number
01 through 03
A
 through...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
650 Feature-Related System Parameters 
17
DID/Tie/ISDN Intercept Treatment
Messaging Service Adjunct (MSA) Connected
Internal Auto-Answer of 
Attd-Extended/Transferred Calls
This only applies to digital telephones (except BRI) with a headset or 
speakerphone capability.
Valid entries Usage
A recorded 
announcement 
extension Toll charges do not apply to DID and private network calls 
routed to an...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
651 Feature-Related System Parameters 
17
Automatic Circuit Assurance (ACA) Enabled
If Automatic Circuit Assurance (ACA) Enabled is 
n, associated ACA fields will 
not display.
Must have an aca-halt button administered on the user’s station. If you enable 
this feature, complete the following ACA-related fields. 
ACA Referral Calls
Indicates where ACA referral calls generate. (Only appears when ACA Enabled...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
652 Feature-Related System Parameters 
17
ACA Short Holding Time Originating Extension 
and ACA Long Holding Time Originating 
Extension
ACA Remote PBX Identification
This field only appears if ACA Referral Calls is 
remote. 
Abbreviated Dial Programming by Assigned 
Lists
Auto Abbreviated/Delayed Transition Interval 
(rings)
Valid entries Usage
An unassigned 
extension Do not use the same extension number...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
653 Feature-Related System Parameters 
17
Protocol for Caller ID Analog Terminals
Determines the protocol/tones sent to a Caller ID phone.
Field descriptions for page 2
Screen 86. Feature-Related System Parameters screen
Maximum Number of Messages Per Station 
(when MSA not in service)
Valid entries Usage
Bellcore
Enter Bellcore for Bellcore protocol with 212 modem protocol 
tones. Used in the U.S. and...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
654 Feature-Related System Parameters 
17
Maximum Number of External Calls Logged Per 
Station
When an external call is not answered, the switch keeps a record of up to 15 calls 
(provided information on the caller identification is available) and the phone’s 
message lamp lights. The phone set displays the names and numbers of 
unsuccessful callers.
Message Waiting Indication for External Calls
Provides a...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
655 Feature-Related System Parameters 
17
Terminal Translation Initialization (TTI) Enabled
Terminal Translation Initialization (TTI) must be enabled on the 
System-Parameters Customer-Options screen before the TTI fields can be 
administered.
!CAUTION:
Changing the TTI Enable field from 
n to y or from y to n triggers a 
background maintenance task that either generates (when changed to 
y) or 
removes...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
656 Feature-Related System Parameters 
17
Record PSA/TTI Transactions in History Log
COR for PSA Dissociated Sets
CPN, ANI for PSA Dissociated Sets
Appears when the COR for PSA Dissociated Sets field is non-blank. Specifies the 
ISDN calling party number (CPN), R2-MFC ANI, and CAMA CESID applied to 
calls made from PSA dissociated sets, if no system-wide calling party information 
has been administered for...