Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 771

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
747 IP Trunk Configuration Manager 
17
Error Messages Shows you that the logging of error or warning messages into the 
Windows NT Event Viewer is on. Display-only.
When this option is on, you can use the Windows NT Event Viewer 
to view the reported errors and warnings. (In this release, the Log 
Properties option is not available for this log.)
Performance 
StatisticsAllows you to turn logging of QoS...

Page 772

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
748 IP Trunk Configuration Manager 
17
QoS dialog box
Use the Quality of Service (QoS) dialog box to configure the quality of service 
options for the DEFINITY ECS connections to remote sites.
The Quality of Service dialog box contains the following parameters:
Parameter Description
Line Pool ID Allows you to specify an integer between 1 and 999 that identifies a 
logical group (pool) of lines. The lines...

Page 773

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
749 IP Trunk Configuration Manager 
17
QoS ParametersnSampling Interval (sec): Allows you to specify how often the 
quality of service to the highlighted line pool’s remote IP address 
will be checked. 
Valid values: 
1 to 300 (seconds). 
nSamples to Average (number): Allows you to specify the 
number of samples to average together when evaluating the 
quality of service to this remote site.
Valid values:...

Page 774

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
750 ISDN trunk group 
17
Related topics
Refer to DEFINITY ECS Administration for Network Connectivity for 
administration procedures.
Refer to ‘‘
IP trunk service’’ on page 1393 for detailed information on this feature.
ISDN trunk group
This screen assigns an Integrated Services Digital Network (ISDN) trunk group 
that supports the ISDN and Call-by-Call Service Selection service selection 
features. The...

Page 775

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
751 ISDN trunk group 
17
Hardware requirements
ISDN-BRI interfaces are supported by the TN2185 Trunk-side BRI circuit pack 
(for implementing the user side of the BRI interface) and by the TN556B or 
TN556C ISDN-BRI Line circuit pack or the TN2198 ISDN BRI (U-LT) Line 
circuit pack (for the network side of the BRI interface). The TN2464 circuit 
supports T1 and E1 digital facilities.
ISDN-PRI interfaces are...

Page 776

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
752 ISDN trunk group 
17
How to administer ISDN trunk groups
The table below shows the screens used to administer the TN765 Processor 
Interface (PI) for R7si and later configurations.
Screen Field
System-Parameters 
Customer-OptionsVersion
ISDN-PRI
QSIG Optional Features
Feature-Related System 
Parameters Send Non-ISDN Trunk Group Name as 
Connected Name
Display Connected Name/Number for ISDN 
DCS Calls...

Page 777

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
753 ISDN trunk group 
17
The table below shows the screens used to administer the TN778 Packet Control 
(PACCON) for an R7si and later configurations.
Screen Field
Feature-Related System Parameters Send Non-ISDN Trunk Group 
Name as Connected Name?
Display Connected Name/Number 
for ISDN DCS Calls?
System-Parameters Customer-Options Version
ISDN-BRI Trunks
ISDN-PRI
QSIG Optional Features
Maintenance-Related...

Page 778

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
754 ISDN trunk group 
17
The table below shows the screens used to administer the TN778 Packet Control 
(PACCON) for R7r and later configurations. 
Notes for Above Tables 
nSystem-Parameters Customer-Options — Set the ISDN-BRI Trunks or 
ISDN-PRI fields to 
y. For a TN778 and if using ISDN-PRI interfaces, set 
the PRI Over PACCON field to 
y. The QSIG Optional Features fields may 
be enabled to allow...

Page 779

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
755 ISDN trunk group 
17
nISDN-BRI Trunk Circuit Pack — This screen is required if using 
ISDN-BRI trunk interfaces. Assign all fields as required.
nDS1 Circuit Pack — This screen is required if using ISDN-PRI interfaces.
— DS1 (T1) Circuit Pack
Assign all fields as required. For Facility Associated Signaling, up 
to 23 ports are available for administration as trunk members in an 
associated ISDN-PRI trunk...

Page 780

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
756 ISDN trunk group 
17
nProcessor Interface Data Module — Use this screen only for a TN765. 
Assign up to 8 interface links using 8 Processor Interface Data Module 
screens for multi-carrier cabinet systems, and up to 4 links for 
single-carrier cabinet systems. One Processor Interface Data Module 
screen must be completed for each interface link to be assigned.
nCommunication Interface Links — Use this...
Start reading Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

All Lucent Technologies manuals