Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
767 ISDN trunk group 
17
Screen 115. ISDN Trunk Group screen
These fields are unique to the ISDN trunk group screen.
BSR Reply-best DISC Cause Value
Switches that are polled as resources in a Best Service Routing application return 
data to the polling switch in the ISDN DISC message. Since some cause values do 
not work over some networks, this field sets the cause value that your switch will 
return in...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
768 ISDN trunk group 
17
DCS Signaling
Specifies the means used to send the DCS message. This field only appears if the 
Used for DCS field entry is 
y and the Service Type field is anything except 
dmi-mos or sddn. Valid entries are bx.25 for the traditional DCS feature or 
d-chan for the DCS over ISDN-PRI D-channel feature. 
DCS over D-channel is not supported on trunk groups containing ISDN-BRI...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
769 ISDN trunk group 
17
NCA-TSC Trunk Member
Identifies the trunk member whose D-channel will be used to route tandem 
NCA-TSCs or QSIG CISCs. Value range for this field is from 1 to the maximum 
number of members per trunk group supported on the switch.
Numbering Format
This field appears if the Send Calling Number field is 
y or r or the Send 
Connected Number field is 
y or r. This specifies the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
770 ISDN trunk group 
17
Path Replacement Method
Appears when either the ISDN-PRI trunk or the ISDN-BRI trunk fields and the 
Basic Call Setup and Supplementary Services with Rerouting fields are set to 
y on 
the System-Parameters Customer-Options screen and when the Supplementary 
Service Protocol is either 
b or e and the Group Type field is isdn on the ISDN 
trunk group screen.
Replace Restricted...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
771 ISDN trunk group 
17
Send Calling Number
Specifies whether the calling party’s number is sent on outgoing or tandemed 
ISDN calls. Valid entries are 
y, n, or r (restricted). If y is entered, the ISDN 
Numbering - Public/Unknown Format screen is accessed to construct the actual 
number to be sent, or the ISDN Numbering-Private screen (based on the 
Numbering Format field) is used. If the value is 
r,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
772 ISDN trunk group 
17
Send Name
Specifies whether the calling/connected/called/busy party’s administered name is 
sent to the network on outgoing/incoming calls. Valid entries are 
y, n, or r 
(restricted). The value 
r indicates that the calling/connected name will be sent by 
the switch but will be marked “presentation restricted.” This value is valid only if 
the Supplementary Services Protocol field...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
773 ISDN trunk group 
17
Wideband Support
Specifies whether Wideband Switching is supported by this trunk group. Valid 
entries are 
y or n. For ISDN trunk groups containing ISDN-BRI interfaces, the 
only valid entry is 
n. Otherwise you can administer this field only if the Wideband 
Switching field is 
y on the System-Parameters Customer-Options screen. If set to 
y, the Wideband Support Options page...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
774 ISDN trunk group 
17
ASAI
User information from ASAI. Valid entries are 
1 to 6 and blank. If blank, that 
field’s information is not forwarded.
Universal Call ID
Unique tag to identify each call. Valid entries are 
1 to 6 and blank. If blank, that 
field’s information is not forwarded.
In-VDN TIme
Number of seconds the call has spent in vector processing. Valid entries are 
1 to 6 
and blank. If blank,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
775 ISDN trunk group 
17
Field descriptions for the Incoming Call 
Handling Treatment page
Screen 117. Incoming Call Handling Treatment
NOTE:
This page does not appear if the Digit Handling (in/out) field is overlap on 
the “in” side or if the Direction field is 
outgoing.
The Incoming Call Handling Treatment page can (optionally) provide unique call 
treatment for different incoming calls on any ISDN trunk...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
776 ISDN trunk group 
17
Each row in the table consists of seven columns. The first three columns 
(Service/Feature, Called Len, and Called Number) constitute a key that together 
select which row or unique treatment should apply for an incoming call on the 
group. The remaining four columns (Del, Insert, and so on) specify the treatment 
to be provided for a call that matches the key.
If an incoming call...