Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
777 ISDN trunk group 
17
Incoming Call Handling Treatment Table entries with a predefined service/feature 
always appear before entries with a user-defined service/feature. To control the 
order in which certain entries appear, you must use user-defined services/features 
for those entries. For example, you can redefine the predefined mega800 
service/feature as an identical user-defined entry with the name...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
778 ISDN trunk group 
17
Del
Specifies the number of leading digits to be deleted from the incoming Called 
Party Number. Calls of a particular type may be administered to be routed to a 
single destination by deleting all incoming digits and then administering the Insert 
field with the desired extension. Valid entries are 
1 to 21, all, or leave blank.
Insert
Specifies the digits to be prepended to the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
779 ISDN trunk group 
17
Field Descriptions for the CBC Trunk Group 
Usage Allocation page
Screen 118. CBC Trunk Group Usage Allocation 
The CBC Trunk Group Usage Allocation screen sets a minimum and maximum 
number of members for up to ten different Services/Features for up to three 
different Usage Allocation Plans (1–3). Refer to ‘‘
Call-by-Call Service Selection’’ 
on page 1305 for a detailed...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
780 ISDN trunk group 
17
Max# Chan
Indicates the maximum number of members of a ISDN trunk group with a Service 
Type field of 
cbc that a particular Service/Feature can use at any given time. This 
field must be completed if a Service/Feature has been entered in the Incoming 
Call Handling Treatment Table screen. Valid values are
 0 to 99 or blank.
Field descriptions for the CBC Service Trunk 
Group...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
781 ISDN trunk group 
17
Scheduled
Indicates whether or not the allocation plans will be in effect according to the 
schedule found on this page. If 
y is entered in this field then there must be at least 
one entry in the schedule.
Act Time
Indicates the time the usage allocation plan administered in the next field (Plan #) 
will become effective. Enter the time in military time. There must be at least one...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
782 ISDN trunk group 
17
H0
Enter 
y to specify the ISDN information transfer rate for 384-kbps of data, which 
is comprised of six B-channels. When a trunk group is administered to support 
H0, the trunk/hunt algorithm to satisfy a call requiring 384-kbps of bandwidth 
uses a fixed allocation scheme.
H11
Enter 
y to specify the ISDN information transfer rate for 1536-kbps of data, which 
is comprised of 24...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
783 ISDN trunk group 
17
Field Descriptions for the Group Member 
Assignments page
Screen 121. ISDN Group Member Assignments 
The total number of pages, and the first page of Group Member Assignments, will 
vary depending on whether the CBC and Wideband Support pages display.
NOTE:
When supporting DCS, Member Number Assignments must be the same 
between nodes (Member #1 must be Member #1 at the far-end...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
784 ISDN Numbering — Private 
17
Sig Grp
When using ISDN-BRI interfaces, this field becomes unadministrable. Otherwise, 
enter the appropriate signaling group number. If a DS1 interface appears in one 
signaling group, then the number of that signaling group appears as a default in 
the Sig Grp column for any trunk on that interface after the screen is submitted. 
This value cannot be altered without adding...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
785 ISDN Numbering — Private 
17
Network Level 
Enter the value of the highest regional level employed by the PNP network. Use 
the following table to find the relationship between the network level and the 
Numbering Plan Identification/Type of Number (NPI/TON) encoding used in the 
QSIG PartyNumber or the Calling Number and Connected Number IEs.
PBX Identifier
NOTE:
The PBX identifier does not depend on...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
786 ISDN Numbering — Private 
17
Level 2 Code
Enter the switch’s second level regional code in the network. Administer this field 
carefully. The system will not check to ensure you have entered a code that 
supports your entry in the Network Level field. You cannot enter anything in this 
field unless the Network Level field is set to 
2.
In QSIG standards, this level 2 code is called the Level 1 Regional...