Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual

ENGINE - V8
12-2-48 REPAIRS
8.Release auxiliary cooling fan multiplug from fan 
cowl.
9.Remove scrivets securing fan cowl.
10.Release fan cowl from radiator.11.Fit LRT-12-216 to engine lifting eyes.
12.Remove nut securing RH engine mounting to 
engine mounting bracket.
13.Remove nut securing LH engine mounting to 
engine mounting bracket.
14.Remove front road wheels.
M26 0865 

ENGINE - V8
REPAIRS 12-2-49
15.Remove nut and disconnect link from LH front 
suspension height sensor.
16.Remove nuts securing RH and LH track rod 
end ball joints to steering arms. Discard nuts.
17.Using LRT-57-036 release track rod ends from 
steering arms.
18.Disconnect multiplug from PAS rack pinion 
sensor.19.Note fitted position of intermediate steering 
column. Remove Torx bolt from intermediate 
steering column clamp and disconnect column 
from PAS rack.
20.Remove 2 Torx bolts and 2 nuts securing...

ENGINE - V8
12-2-50 REPAIRS
23.Remove 2 bolts securing LH engine mounting 
to sub-frame and remove engine mounting, 
discard bolts
NOTE: The LH engine mounting is removed 
from under the LH front wheel arch through the 
opening of the front sub-frame.
Refit
1.Clean engine mountings and mating faces.
2.Fit LH engine mounting to sub-frame and 
tighten new bolts to 56 Nm (41 lbf.ft).
3.Lower engine onto engine mountings.
NOTE: Guide the fan cowl into position as the 
engine is lowered.
4.Position PAS rack...

ENGINE - V8
REPAIRS 12-2-51
Engine mounting - RH 
$% 12.45.12 
Before disconnecting the battery, ensure all text and 
cautions in the battery disconnection section are 
observed. 
 
 +  GENERAL INFORMATION, Electrical 
Precautions.
Remove
1.Position vehicle on lift.
2.Disconnect battery earth lead.
3.Remove air intake plenum.
 
 +  HEATING AND VENTILATION, 
REPAIRS, Plenum - air intake.
4.Remove air intake hose.
 
 +  ENGINE MANAGEMENT SYSTEM - 
V8, REPAIRS, Hose - air flow meter to 
throttle body....

ENGINE - V8
12-2-52 REPAIRS
10.Fit LRT-12-216 to engine lifting eyes.
11.Remove nut securing RH engine mounting to 
engine mounting bracket.
12.Remove nut securing LH engine mounting to 
engine mounting bracket.
13.Connect chain to engine lifting bracket and 
raise engine sufficiently only to clear mounting.
CAUTION: To prevent damage to the 
radiator, guide the fan cowl clear of the 
radiator as it is raised with the engine.14.Remove 2 bolts securing RH engine mounting 
to sub-frame, discard bolts....

ENGINE - V8
REPAIRS 12-2-53
Torque converter drive plate 
$% 12.53.13 
Before disconnecting the battery, ensure all text and 
cautions in the battery disconnection section are 
observed. 
 
 +  GENERAL INFORMATION, Electrical 
Precautions.
New drive plates do not have the hollow bush fitted. 
It is supplied with a new drive plate separately.
Remove
1.Position vehicle on lift.
2.Disconnect battery earth lead.
3.Remove gearbox and transfer gearbox 
assembly.
 
 +  AUTOMATIC TRANSMISSION - ZF 
5HP24,...

ENGINE - V8
12-2-54 REPAIRS
Filter - engine oil 
$% 12.60.04 
Before disconnecting the battery, ensure all text and 
cautions in the battery disconnection section are 
observed. 
 
 +  GENERAL INFORMATION, Electrical 
Precautions.
Remove
1.Position absorbent cloth beneath oil filter 
housing to collect spillage.
2.Remove oil filter cap and filter element from oil 
filter housing. Remove oil filter element from oil 
filter cap. Discard filter element and 2 O rings.
Refit
1.Clean oil filter cap and...

ENGINE - V8
REPAIRS 12-2-55
Refit
1.Clean dipstick tube and mating faces in engine 
oil sump.
2.Fit new O ring to oil sump and position dipstick 
tube and washer to oil sump.
3.Fit clamp securing dipstick tube to oil sump and 
tighten nut.
4.Fit and tighten 2 nuts securing dipstick tube 
bracket to camshaft cover.
5.Fit dipstick.
6.Check engine oil level, top-up if necessary.
7.Connect battery earth lead.
Strainer - oil pick up  
$% 12.60.20 
Before disconnecting the battery, ensure all text and...

ENGINE - V8
12-2-56 REPAIRS
Pump - oil 
$% 12.60.26 
Before disconnecting the battery, ensure all text and 
cautions in the battery disconnection section are 
observed. 
 
 +  GENERAL INFORMATION, Electrical 
Precautions.
Remove
1.Position vehicle on lift.
2.Disconnect battery earth lead.
3.Remove engine upper oil sump.
 
 +  Engine - V8, REPAIRS, Gasket - oil 
sump.
4.Remove nut securing sprocket to oil pump and 
remove sprocket.
5.Remove 2 nuts and 1 bolt securing oil pump to 
engine and remove oil...

ENGINE - V8
REPAIRS 12-2-57
Gasket - lower oil sump 
$% 12.60.37 
Before disconnecting the battery, ensure all text and 
cautions in the battery disconnection section are 
observed. 
 
 +  GENERAL INFORMATION, Electrical 
Precautions.
Remove
1.Position vehicle on lift.
2.Disconnect battery earth lead.
3.Drain engine oil.
 
 +  MAINTENANCE, PROCEDURES, 
Engine oil and filter - V8 engine.
4.Remove 21 bolts securing lower oil sump to 
upper oil sump. Remove lower oil sump and 
discard gasket.Refit
1.Clean...