Kyocera TASKalfa 552ci User Manual

Default Setting (System Menu)
8-31
8
Use the procedure below to set the destination check before send.
1Press the System Menu key.
2Press [Send] and then [Change] of Dest. Check before Send.
3Select [Off] or [On].
4Press [OK].
Color Type
Set the color type when you send color documents. The table below shows the available settings.
Selecting RGB displays the color profile values set on the machine.
Use the procedure below to set the color type.
1Press the System Menu key.
2Press [Send] and then [Change]...

Default Setting (System Menu)
8-32
Setting the Default Send Screen
Use this procedure to set the default screen displayed when you press the Send key.
The table below shows the available settings.
Use the procedure below to set the default send screen.
1Press the System Menu key.
2Press [Send] and then [Change] of Default Screen.
3Press [Destination] or [Address Book].
4Press [OK].Item Detail
Destination Displays the destination screen when the Send key is pressed 
(screen for sending).
Address Book...

Default Setting (System Menu)
8-33
8
Document Box Settings
The following settings are available for Document Box.
• Registering / Editing Box …8-33
• Default Setting …8-33
• Job Box …8-33
• Quick Setup Registration …8-33
Registering / Editing Box
Creates a new box, edits a box, or checks details of a box in the custom box, or deletes a box from the custom 
box. For details, refer to Using a Custom Box on page 6-2.
Default Setting
Sets the time at which documents in the custom box are automatically...

Default Setting (System Menu)
8-34 Use the procedure below to register the Quick Setup functions.
1Press the System Menu key.
2Press [Document Box/Removable Memory] and [Next] of Quick Setup Registration.
3Press [Next] of Store File, Print, or Send. 
4Press [Change] of the function to be registered in Quick Setup. 
5Select a key (1-6) allocated on the Quick Setup screen. Press [Off] to delete a key from the Quick Setup.
6Press [OK]. If you overwrite the setting, a confirmation screen appears. Press...

Default Setting (System Menu)
8-35
8
Printer Settings
Printing from computers, settings are generally made on the application software screen. However, the following 
settings are available for configuring the defaults to customize the machine.
• Emulation …8-35
• Color Setting …8-36
• EcoPrint …8-36
• Override A4/Letter …8-37
• Duplex …8-37
• Copies …8-37
• Orientation …8-38
• Form Feed Timeout …8-38
• LF Action …8-39
• CR Action …8-39
• Paper Feed Mode …8-40
NOTE: If user login administration is...

Default Setting (System Menu)
8-36
2Press [Printer] > [Change] of Emulation > [KPDL(Auto)] > [Alt Emulation].
3Select the desired alternative emulation and then press [OK].
4Press [OK].
Setting of KPDL error report
When an error has occurred during printing in KPDL emulation mode, set whether or not the error report is 
output. The default setting is Off (not output).
Use the procedure below to specify the KPDL error report setting.
1Press the System Menu Key.
2Press [Printer] > [Change] of Emulation >...

Default Setting (System Menu)
8-37
8
Override A4/Letter
Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. The table 
below shows the available settings.
Use the procedure below to specify the override A4/Letter setting.
1Press the System Menu key.
2Press [Printer] and [Change] of Override A4/Letter.
3Press [Off] or [On].
4Press [OK].
Duplex
Select binding orientation for duplex mode. The table below shows the available settings.
Use the procedure below...

Default Setting (System Menu)
8-38
1Press the System Menu key.
2Press [Printer] and [Change] of Copies.
3Press [+],[–] or the numeric keys to set the default number of copies. 
4Press [OK].
Orientation
Set the default orientation, Portrait or Landscape.
Use the procedure below to set the default orientation for printing.
1Press the System Menu key.
2Press [Printer] and [Change] of Orientation.
3Press [Portrait] or [Landscape].
4Press [OK].
Form Feed Timeout
Receiving print data from the computer, the...

Default Setting (System Menu)
8-39
8
LF Action
Set the line feed action when the machine receives the line feed code (character code 0AH). The table below 
shows the available settings.
Use the procedure below to specify an LF action.
1Press the System Menu key.
2Press [Printer], [ ] and [Change] of LF Action.
3Press [LF Only], [LF and CR] or [Ignore LF].
4Press [OK].
CR Action
Set the character return action when the machine receives the character return code (character code 0DH). The 
table below shows...

Default Setting (System Menu)
8-40
Paper Feed Mode
While printing from the computer, select how to feed paper when the paper source and type are specified. The 
table below shows the available settings.
Use the procedure below to select the paper feed mode.
1Press the System Menu key.
2Press [Printer], [ ] and [Change] of Paper Feed Mode.
3Press [Auto] or [Fixed].
4Press [OK].Item Description 
Auto Search the paper source that matches the selected paper size and type.
Fixed Print on paper loaded in the...