Kyocera TASKalfa 552ci User Manual

Default Setting (System Menu)
8-71
8
Deleting Applications
Use the procedure below to delete an installed application.
IMPORTANT: Always exit the application to be deleted before deleting the application. (Refer to Activating/
Deactivating Application on page 8-70.)
1Press the System Menu key.
2Press [ ] and then [Application].
NOTE: If login administration is disabled, the user authentication screen appears. Enter your login user name 
and password and then press [Login]. For this, you need to login...

Default Setting (System Menu)
8-72
System Initialization
Initialize the hard disk mounted on the machine to return to the default mode.
CAUTION: System initialization will erase Custom Document Boxes, data stored in Document Box, addresses 
in the Address Book, user property, account information, and settings.
NOTE: This item will not be displayed if the optional Data Security Kit is installed. Refer to the Data Security 
Kit (E) Operation Guide on the bundled CD-ROM about the functions added when the...

Default Setting (System Menu)
8-73
8
Network Setup
The following network settings are available.
• Checking Host Name …8-73
• TCP/IP (IPv4) Setup …8-73
• TCP/IP (IPv6) Setup …8-73
• Protocol Detail …8-75
• NetWare Setup …8-76
• AppleTalk Setup …8-76
• WSD Scan Setup …8-76
• WSD Print Setup …8-77
• Secure Protocol …8-77
• IPSec Setting …8-79
• LAN Interface Setup …8-79
Checking Host Name
Check the host name of the machine. Use the procedure below.
1Press the System Menu key.
2Press [System], [Next] of...

Default Setting (System Menu)
8-74 Manual Setting (IPv6)
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6). The manual setting is 
available when selecting [On] for TCP/IP (IPv6). Use the procedure below.
1Press the System Menu key.
2Press [System], [Next] of Network and then [Next] of TCP/IP Setting.
3Press [Next] of IPv6.
4Press [Next] of Manual Setting.
5Press [IP Address (Manual)] to enter IP address. The format of the IPv6 address is a sequence of numbers 
(128 bit...

Default Setting (System Menu)
8-75
8
6Press [OK].
7After changing the setting, restart the system or turn the machine OFF and then ON again. 
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
Protocol Detail
The table below lists the network related function settings. The network related functions are available when 
TCP/IP is On.
Item DescriptionDefault 
SettingRestarting 
the System*
*Y: The machine must be restarted after the setting is changed.
N: The...

Default Setting (System Menu)
8-76 Use the procedure below.
The following procedure is an example for specifying the SMTP (E-mail TX) settings.
1Press the System Menu key.
2Press [System] and then [Next] of Network to display the network settings screen.
3Display the item you want to set and press [Change] for that item. 
In this example, press [Change] of SMTP (E-mail TX).
4Press [On] or [Off].
5Press [OK].
6After changing the setting, restart the system or turn the machine OFF and then ON again. 
For...

Default Setting (System Menu)
8-77
8
WSD Print Setup
Select whether or not to use WSD Print. The default setting is On. Use the procedure below.
1Press the System Menu key.
2Press [System], [Next] of Network and then [Change] of WSD Print.
3Press [On] or [Off].
4Press [OK].
5After changing the setting, restart the system or turn the machine OFF and then ON again. 
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
Secure Protocol
Encrypt the communication...

Default Setting (System Menu)
8-78
3Press [IPP over SSL Only] or [IPP or IPP over SSL].
4Press [OK].
5After changing the setting, restart the system or turn the machine OFF and then ON again. 
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
HTTP Security Setup
Select the HTTP security level. This setup is available when SSL is On. The default setting is HTTPS Only.
NOTE: HTTP must be set to [On] in Protocol Detail on page 8-75.
Use the procedure below....

Default Setting (System Menu)
8-79
8
4Press [OK].
5After changing the setting, restart the system or turn the machine OFF and then ON again. 
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
IPSec Setting
Sets up IPSec. The default setting is Off. Use the procedure below.
1Press the System Menu key.
2Press [System], [Next] of Network, and then [Change] of IPSec.
NOTE: If user login administration is disabled, the user authentication screen appears. Enter...

Default Setting (System Menu)
8-80
Interface Block Setting
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or 
optional interfaces. 
The following interface block settings are available:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• Optional interface (Optional interface card setting)
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is...