Kyocera TASKalfa 552ci User Manual

Troubleshooting
10-25
10
5Remove the jammed paper.
If the paper tears, remove every loose scrap from 
inside the machine.
6Close the left cover 2.
7Pull out cassette 1 and remove the jammed paper.
If the paper tears, remove every loose scrap from 
inside the machine.
8Push cassette 1 back in place securely.
Downloaded From ManualsPrinter.com Manuals 

Troubleshooting
10-26
Fixing unit
Follow the steps below to clear paper jams in the fixing unit.
1Pull up left cover 1 lever and open the left cover 1.
2Remove the jammed paper.
3Open the fuser cover (A1).
CAUTION: The fixing unit is extremely hot. Take 
sufficient care when working in this area, as there is a 
danger of getting burned.
Downloaded From ManualsPrinter.com Manuals 

Troubleshooting
10-27
10
4Remove the jammed paper.
If the paper tears, remove every loose scrap from 
inside the machine.
5If jammed paper is seen through the paper ejection 
slot, pull it toward your side to remove it.
6Push fuser cover back in place, and press the 
specified position to close left cover 1.
Downloaded From ManualsPrinter.com Manuals 

Troubleshooting
10-28
Optional Document Processor
Follow the steps below to clear paper jams in the optional document processor.
1Remove the original from the original tray.
2Open the document processor top cover.
3Remove the jammed original.
If the original tears, remove every loose scrap from 
inside the machine.
If the original is difficult to remove, turn the dial. The 
original will scroll out to a position where it can be 
removed easily.
If the original tears, remove every loose scrap from 
inside...

Troubleshooting
10-29
10
4Lift up reverse unit.
5Remove the jammed original.
If the original tears, remove every loose scrap from 
inside the machine.
6Put reverse unit back in its original place and close 
the document processor top cover.
7Reload the originals on the document processor 
tray.
Optional Document Finisher
If a misfeed occurs in the optional document finisher, refer to the respective Operation Guides to clear the jam.
Optional Job Separator
Follow the steps below to clear paper jams in the...

Troubleshooting
10-30
2Pull up left cover 1 lever and open left cover 1.
3Press the lever and open the job separator.
4Remove the jammed paper.
If the paper tears, remove every loose scrap from 
inside the machine.
5Press the indicated position to close left cover 1.
Downloaded From ManualsPrinter.com Manuals 

11-1
11 Management
This chapter explains the following operations.
• User Login Administration ................................................................. 11-2
• Job Accounting ............................................................................... 11-14
• Data Security Kit Operations........................................................... 11-27
Downloaded From ManualsPrinter.com Manuals 

Management
11-2
User Login Administration
User login administration specifies how the user access is administered on this machine. Enter correct login user 
name and password for user authentication to login.
Access are in three levels - User, Administrator, and Machine Administrator. The security levels can be modified 
only by the machine administrator.
First User Login Administration
Follow these steps for the first user login administration. 
Enable user login administration. (page 11-2)

Add a...

Management
11-3
11
5Select [Local Authentication] or [Network 
Authentication]. Select [Off] to disable user login 
administration. 
If you select [Network Authentication], enter the 
host name (62 characters or less) and domain 
name (256 characters or less) for the 
Authentication Server. Select [NTLM] or [Kerberos] 
as the server type.
NOTE: If the login user name and password are 
rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the...

Management
11-4
4Enter the login password and press [OK]. 
NOTE: If Job Accounting is enabled, you can browse 
the number of pages printed and the number of pages 
scanned by pressing [Check Counter]. 
If Network Authentication is selected as the user 
authentication method, either Local or Network can be 
selected as the authentication destination.
5Check the login user name and password are 
correct, and press [Login]. 
Logout
To log out the machine, press the Logout key to return 
to the login user...