Kyocera TASKalfa 552ci User Manual

Default Setting (System Menu)
8-51
8
Use the procedure below to set the color calibration.
1Press the System Menu key.
2Press [ ], [Adjustment/Maintenance], [ ] and then [Change] of Color Calibration Cycle.
3Select [Auto], [Short], [Standard] or [Long].
4Press [OK].
Gray Adjustment
After prolonged use, or from the effects of surrounding temperature or humidity, the hue of printed color output 
may shift or color drift may occur. Use this function to correct color settings when the color of a finished...

Default Setting (System Menu)
8-52 Detailed Adjustment
A total of 5 color pattern pages (No. 1 to 5) are printed during detailed adjustment. As with normal adjustment 
(page 8-51), the printed color patterns are read sequentially during detailed adjustment.
Use the procedure below to carry out detailed adjustment.
1Press the System Menu key.
2Press [ ], [Adjustment/Maintenance], [ ] and 
then [Next] of Gray Adjustment.
3Press [Detail].
4Press [Execute]. A color pattern is printed.
Check that the number 1...

Default Setting (System Menu)
8-53
8
Developer Refresh
When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
1Press the System Menu key.
2Press [ ], [Adjustment/Maintenance], [ ] and then [Next] of Developer Refresh.
3Press [Execute]. Developer Refresh begins.
NOTE: Waiting time may be longer when the toner is refilled during developer refresh.
4Press [OK] after Developer Refresh is complete.
Laser Scanner Cleaning
If white or color streaks appear on...

Default Setting (System Menu)
8-54
First Print Position
Using this function speeds up either of the first print time of black and white printing or color printing by changing 
the default start position of the first print. In addition, the machine can automatically detect the appropriate 
position depending on your usage.
1Press the System Menu key.
2Press [ ], [Adjustment/Maintenance], [ ] and then [Next] of First Print Position.
3Select [Standard], [Black & White Priority], [Color Priority] or [Auto]....

Default Setting (System Menu)
8-55
8
Date/Timer 
Date/Timer settings include:
• Date/Time …8-55
• Date Format …8-55
• Time Zone …8-56
• Auto Panel Reset …8-56
• Low Power Timer …8-57
• Auto Sleep …8-57
• Error Clear Timer …8-59
• Interrupt Clear Timer …8-59
NOTE: If user login administration is enabled, you can only change the settings by logging in with 
administrator privileges.
Date/Time 
Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and...

Default Setting (System Menu)
8-56
Time Zone 
Set the time difference in the location you are from GMT. 
Use the procedure below to set the time difference.
1Press the System Menu key.
2Press [ ], [Date/Timer] and then [Change] of Time Zone.
3Select the location.
NOTE: Press [ ] or [ ] to select the location.
4Press [Off] or [On] of Summer Time and press [OK].
NOTE: If you select a region that does not utilize summer time, the summer time setting screen will not appear.
Auto Panel Reset
If no jobs are...

Default Setting (System Menu)
8-57
8
Panel Reset Timer
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset. Options are 
between 5 and 495 seconds (every five seconds).
NOTE: If you select [Off] for Auto Panel Reset, the time display does not appear. 
Use the procedure below to set the reset time.
1Press the System Menu key.
2Press [ ], [Date/Timer] and then [Change] of Panel Reset Timer.
3Press [+] or [–] to enter the time until Auto Panel Reset is turned on....

Default Setting (System Menu)
8-58 Sleep Timer
Set the amount of time to wait before Auto Sleep. Options are between 1 and 240 minutes (every one minute).
NOTE: If you select [Off] for Auto Sleep, the time display does not appear.
Use the procedure below to set the Auto Sleep time.
1Press the System Menu key.
2Press [ ], [Date/Timer] and then [Change] of Sleep Timer.
3Press [+] and [–]  or the numeric keys to enter the time until Auto Sleep is turned on.
4Press [OK].
Auto Error Clear
If an error occurs...

Default Setting (System Menu)
8-59
8
Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options 
are between 5 and 495 seconds (every five seconds). 
NOTE: If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
1Press the System Menu key.
2Press [ ], [Date/Timer], [ ] and then [Change] of Error Clear Timer. 
3Press [+] or [–] to enter the time...

Default Setting (System Menu)
8-60
Editing Destination (Address Book/Adding One Touch Keys)
Save frequently used destinations to Address Book or One Touch Keys. The saved destinations can be 
changed. The destinations are available for Send as E-mail, Send to Folder, and Fax Transmission (optional).
Adding a Destination
Add a new destination to the Address Book. There are two registering methods, contacts and groups. When 
adding a group, enter the group name and select group members from the Address...