Konica Minolta bizhub 500 User Manual

3Specifying Settings From the Control Panel
3-66 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
3.15 FTP Settings
Settings for sending scan data to FTP servers can be specified.
FTP Parameters
The FTP parameters are as follows:
FTP Setting screen 1/3
FTP Setting screen 2/3
FTP Setting screen 3/3
ItemDescription
Proxy Server Address Sets the proxy server address. Use the keypad in the 
control panel to type in the address.
Proxy Port Number Sets the port number of the proxy server. To...

Specifying Settings From the Control Panel3
bizhub 500/420 3-67
Specifying Settings From the Control Panel
Chapter 3
To specify FTP settings
1In the Administrator Setting screen, touch [5 Network Setting]. (Refer to 
page 3-8 for more details.)
2In the Network Setting screen, touch [5 FTP Setting].
FTP Setting screen 1/3 appears.
3Specify the desired settings.
4Touch [Fwd.→].
FTP Setting screen 2/3 appears.
5Specify the desired settings.
6Touch [Fwd.→].
FTP Setting screen 3/3 appears.
Downloaded From...

3Specifying Settings From the Control Panel
3-68 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
7Specify the desired settings.
8Touch [OK].
The FTP settings are applied.
2
Note 
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display 
area. Otherwise, cancel the Utility mode by touching [Close] in each 
screen until the screen for the Copy, Fax, Scan or Box mode appears.
Downloaded From ManualsPrinter.com Manuals 

Specifying Settings From the Control Panel3
bizhub 500/420 3-69
Specifying Settings From the Control Panel
Chapter 3
3.16 SMB Settings
You can specify the settings for sharing printers and sending files over a net-
work.
SMB Parameters
The SMB parameters are as follows:
SMB Setting screen 1/4
WINS Setting screen 2/4
WINS Setting screen 3/4
Client Setting screen 4/4
ItemDescription
Print Setting Specifies whether to use the SMB port in Print mode.
NetBIOS Name Sets the NetBIOS name. Use the keyboard that...

3Specifying Settings From the Control Panel
3-70 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
2
Note 
When performing SMB scans (host name setting) via a router, specify the 
WINS settings according to the SMB transmission settings.
To specify SMB settings
1In the Administrator Setting screen, touch [5 Network Setting]. (Refer to 
page 3-8 for more details.)
2In the Network Setting screen, touch [6 SMB Setting].
The SMB Setting screen (1/4) appears.
3Specify the desired settings....

Specifying Settings From the Control Panel3
bizhub 500/420 3-71
Specifying Settings From the Control Panel
Chapter 3
7Specify the desired settings.
8Touch [Fwd.→].
SMB Setting screen 4/4 appears.
9Specify the desired settings.
10Touch [OK].
The SMB settings are applied.
Downloaded From ManualsPrinter.com Manuals 

3Specifying Settings From the Control Panel
3-72 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
2
Note 
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display 
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode 
by touching [Close] in each screen until the screen for the Copy, Fax, 
Scan or Box mode appears.
Downloaded From ManualsPrinter.com Manuals 

Specifying Settings From the Control Panel3
bizhub 500/420 3-73
Specifying Settings From the Control Panel
Chapter 3
3.17 AppleTalk Settings
You can specify the settings for network printing using AppleTalk.
AppleTalk Parameters
The AppleTalk parameters are as follows:
To specify AppleTalk settings
1In the Administrator Setting screen, touch [5 Network Setting]. (Refer to 
page 3-8 for more details.)
2In the Network Setting screen, touch [7 AppleTalk Setting].
The AppleTalk Setting screen appears....

3Specifying Settings From the Control Panel
3-74 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
4Touch [OK].
The AppleTalk settings are applied.
2
Note 
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display 
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode 
by touching [Close] in each screen until the screen for the Copy, Fax, 
Scan or Box mode appears.
Downloaded From...

Specifying Settings From the Control Panel3
bizhub 500/420 3-75
Specifying Settings From the Control Panel
Chapter 3
3.18 Enabling LDAP Settings
The LDAP function to which the machine can connect and search and re-
trieve information can be enabled/disabled. 
Enabling LDAP Parameters
The Enabling LDAP parameters are as follows:
To specify Enabling LDAP settings
1In the Administrator Setting screen, touch [5 Network Setting]. (Refer to 
page 3-8 for more details.)
2In the Network Setting screen, touch [8...