Konica Minolta bizhub 500 User Manual

3Specifying Settings From the Control Panel
3-56 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
5Specify the desired settings.
6Touch [Fwd.→].
Pserver Setting screen 3/5 appears.
7Specify the desired settings.
8Touch [Fwd.→].
Pserver Setting screen 4/5 appears.
9Specify the desired settings.
10Touch [Fwd.→].
Nprinter/Rprinter Setting screen 5/5 appears.
Downloaded From ManualsPrinter.com Manuals 

Specifying Settings From the Control Panel3
bizhub 500/420 3-57
Specifying Settings From the Control Panel
Chapter 3
11Specify the desired settings.
12Touch [OK].
The NetWare settings are applied.
2
Note 
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display 
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode 
by touching [Close] in each screen until the screen for the Copy, Fax, 
Scan or Box mode appears....

3Specifying Settings From the Control Panel
3-58 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
Status
The NetWare status can be verified.
1In NetWare Setting screen 2/5, touch [Status].
The NetWare Status screen appears.
2Touch [ ] or [ ] to select the server to verify.
3Verify the NetWare status.
4Touch [Close].
Downloaded From ManualsPrinter.com Manuals 

Specifying Settings From the Control Panel3
bizhub 500/420 3-59
Specifying Settings From the Control Panel
Chapter 3
3.14 http Server Settings
You can specify the http server settings, PageScope Web Connection set-
tings, and the IPP settings used by the printer of this machine.
IPP and http Parameters
The IPP parameters are as follows:
http Server Setting screen 1/4
http Server Setting screen 2/4
http Server Setting screen 3/4
http Server Setting screen 4/4
ItemDescription
http  Server  Setting Select...

3Specifying Settings From the Control Panel
3-60 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
To specify IPP and http settings
1In the Administrator Setting screen, touch [5 Network Setting]. (Refer to 
page 3-8 for more details.)
2In the Network Setting screen, touch [4 http Server Setting].
The http Server Setting screen appears.
3Specify the desired settings.
4Touch [Fwd.→].
http Server Setting screen 2/4 appears.
5Specify each item.
6Touch [Fwd.→].
http Server Setting screen...

Specifying Settings From the Control Panel3
bizhub 500/420 3-61
Specifying Settings From the Control Panel
Chapter 3
7Specify each item.
8Touch [Fwd.→].
http Server Setting screen 4/4 appears.
9Specify the desired settings.
10Touch [OK].
The IPP settings are applied.
2
Note 
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display 
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode 
by touching [Close] in each...

3Specifying Settings From the Control Panel
3-62 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
Support Operation
Specify whether each function is supported in IPP communication.
[OFF]: Responds as not supported.
[ON]: Responds to communication. No response is returned for “Cancel 
Job”, “Open Job”, and “Open Job Attributes”.
1On the IPP Setting screen, touch [Support Operation].
The Support Operation screen appears.
2Touch [ON] or [OFF] for each item.
3Touch [OK].
The operation...

Specifying Settings From the Control Panel3
bizhub 500/420 3-63
Specifying Settings From the Control Panel
Chapter 3
Printer Information
The printer information can be specified.
1In the IPP Setting screen, touch [Printer Information].
Printer Information screen 1/2 appears.
2Touch [Printer Name].
The Printer Name screen appears.
3Type in the printer name (up to 127 characters).
4Touch [OK].
– To cancel changes to the setting, touch [Cancel].
The printer name is set, and the Printer Information screen...

3Specifying Settings From the Control Panel
3-64 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
6Type in the printer location (up to 127 characters).
7Touch [OK].
– To cancel changes to the setting, touch [Cancel].
The printer location is set, the Printer Information screen appears 
again.
8Touch [Fwd.→].
Printer Information screen 2/2 appears.
9Touch [Printer Information].
The Printer Information screen appears.
Downloaded From ManualsPrinter.com Manuals 

Specifying Settings From the Control Panel3
bizhub 500/420 3-65
Specifying Settings From the Control Panel
Chapter 3
10Type in the printer information (up to 127 characters).
– To cancel changes to the setting, touch [Cancel].
11Touch [OK].
The printer information is set, the Printer Information screen appears 
again.
12In Printer Information screen 2/2, touch [Print URI].
The Print URI screen appears.
13Check the print URIs.
14Touch [Close].
The Printer Information screen appears again.
15Touch...