Konica Minolta bizhub 500 User Manual

3Specifying Settings From the Control Panel
3-116 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
3.29 LPD Settings
The use of LPD when printing can be enabled or disabled.
To specify LPD settings
1In the Administrator Setting screen, touch [5 Network Setting]. (Refer to 
page 3-8 for more details.)
2In the Network Setting screen, touch [0 Detail Setting].
3In the Detail Setting screen, touch [7 LPD Setting].
The LPD Setting screen appears.
4Touch [Enable] or [Disable].
5Touch [OK]....

Specifying Settings From the Control Panel3
bizhub 500/420 3-117
Specifying Settings From the Control Panel
Chapter 3
3.30 Prefix/Suffix Settings
The registered characters can be added to the e-mail address that is speci-
fied when sending e-mail. This eliminates having to enter characters that are 
often entered such as the same domain name.
Prefix/Suffix Parameters
The prefix/suffix parameters are as follows:
To specify the prefix/suffix settings
1In the Administrator Setting screen, touch [5 Network...

3Specifying Settings From the Control Panel
3-118 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
4Specify the desired settings.
The prefix/suffix is set.
If [ON] is selected, continue with the registration of prefixes/suffixes.
2
Note 
To quit specifying the Utility mode setting, touch [Exit] in the sub display 
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode 
by touching [Close] in each screen until the screen for the Copy, Fax, 
Scan or Box mode...

Specifying Settings From the Control Panel3
bizhub 500/420 3-119
Specifying Settings From the Control Panel
Chapter 3
Prefix/Suffix Setting
The character strings that are used by the prefix/suffix input function can be 
registered.
1In the Prefix/Suffix Setting screen, touch [2 Prefix/Suffix Setting].
The Prefix/Suffix Setting screen appears.
2Touch [Prefix].
The Prefix screen appears.
3Enter the character string that is to be used as a prefix (up to 20 char-
acters).
– For the procedure to enter...

3Specifying Settings From the Control Panel
3-120 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
4Touch [OK].
– To cancel changes to the setting, touch [Cancel].
The prefix is set.
5Touch [Suffix].
The Suffix screen appears.
6Enter the character string that is to be used as a suffix (up to 64 char-
acters).
– For the procedure to enter characters, refer to “Entering text” on 
page 6-5.
7Touch [OK].
– To cancel changes to the setting, touch [Cancel].
The suffix is set.
8Touch...

Specifying Settings From the Control Panel3
bizhub 500/420 3-121
Specifying Settings From the Control Panel
Chapter 3
3.31 Action for Invalid Certificate
When this machine is to be connected to an SSL server as a client, you can 
specify the operation method when the validation of the SSL server certifi-
cate has expired.
2
Note 
The functions that can be specified are described below. 
SMTP over SSL
POP over SSL
LDAP over SSL
To specify the Action for Invalid Certificate settings
1In the Administrator...

3Specifying Settings From the Control Panel
3-122 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
2
Note 
To display the Administrator Setting screen, refer to “To display the Ad-
ministrator Setting screen” on page 3-8.
2
Note 
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display 
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode 
by touching [Close] in each screen until the screen for...

Specifying Settings From the Control Panel3
bizhub 500/420 3-123
Specifying Settings From the Control Panel
Chapter 3
3.32 SNMP Settings
SNMP settings can be specified.
SNMP Parameters
The SNMP parameters are as follows:
The v1/v2c settings that can be specified are described below.
ItemDescription
SNMP Setting Specify whether to use SNMP.
SNMP v1/v2c(IP) Select whether to use SNMP v1/v2c (IP).
SNMP v3(IP) Select whether to use SNMP v3 (IP).
SNMP v1(IPX) Select whether to use SNMP v1 (IPX).
UDP Port...

3Specifying Settings From the Control Panel
3-124 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
To specify SNMP settings
1In the Administrator Setting screen, touch [5 Network Setting]. (Refer to 
page 3-8 for more details.)
2In the Network Setting screen, touch [Fwd.->], then [1 SNMP Setting].
3Specify the desired settings.
4Touch [OK].
The SNMP is set.
Downloaded From ManualsPrinter.com Manuals 

Specifying Settings From the Control Panel3
bizhub 500/420 3-125
Specifying Settings From the Control Panel
Chapter 3
v1/v2c Setting
1In the Network Setting screen, touch [v1/v2c Setting].
2Specify the settings for v1/v2c.
3Touch [OK].
The SNMP Setting screen appears again.
Downloaded From ManualsPrinter.com Manuals