Konica Minolta bizhub 500 User Manual

3Specifying Settings From the Control Panel
3-136 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
Authentication
Specify whether to use authentication for access from other systems that 
use OpenAPI. (Default setting: OFF)
1In the Administrator Setting screen, touch [System Connection]. (Refer 
to page 3-8 for more details.)
2In the System Connection screen, touch [1 OpenAPI Setting].
3In the OpenAPI Setting screen, touch [Authentication].
The OpenAPI Setting screen appears.
4Touch...

Specifying Settings From the Control Panel3
bizhub 500/420 3-137
Specifying Settings From the Control Panel
Chapter 3
8Enter the password (up to 8 characters), and then touch [OK].
The user password is set.
9Touch [OK].
The authentication function when OpenAPI is used is set.
2
Note 
To cancel changes to the setting, touch [Cancel].
!
Detail 
For the procedure to enter characters, refer to “Entering text” on 
page 6-5.
Downloaded From ManualsPrinter.com Manuals 

3Specifying Settings From the Control Panel
3-138 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
3.36 External Server Authentication
If performing user authentication using an external server, multiple settings 
are required depending on the type of server being used. Specify the settings 
by using the following procedure as reference.
You can specify the external server authentication settings according to the 
network environment that is to be used.
2
Note 
In the future, the...

Specifying Settings From the Control Panel3
bizhub 500/420 3-139
Specifying Settings From the Control Panel
Chapter 3
!
Detail 
When “Active Directory” is selected under “External Server Authentica-
tion”, specify a password with one character or more. If a password is not 
specified, authentication will fail.
Do not use “ ” ”and “+” in the external server password. For details on the 
operating conditions of an external server, ask the network administrator.
If “Password Rules” is enabled, a password...

3Specifying Settings From the Control Panel
3-140 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
3In TCP/IP Setting screen 3/5 from the Network Setting screen, specify 
the following settings. Specify the DNS server that is connected to “Ac-
tive Directory”.
– Priority DNS Server
– Substitute 1 DNS Server
– Substitute 2 DNS Server
4In TCP/IP Setting screen 4/5 from the Network Setting screen, specify 
the following settings.
– DNS Default Domain Name
5In TCP/IP Setting screen 5/5...

Specifying Settings From the Control Panel3
bizhub 500/420 3-141
Specifying Settings From the Control Panel
Chapter 3
6In [Administrator Setting] — [User Authentication/Account Track] — 
[Authentication Method], specify the following settings.
– Specify “On (External Server)” in User Authentication.
– Specify “Active Directory” in External Server Type.
– Specify the domain name and the default setting. 
– For “Active Directory”, select the domain name from multiple 
names.
Downloaded From...

3Specifying Settings From the Control Panel
3-142 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
7In [Administrator Setting] — [1 System Setting] — [3 Date/Time Set-
ting], specify the following settings.
– Specify the current time and time zone.
2
Note 
To display the Administrator Setting screen, refer to “To display the Ad-
ministrator Setting screen” on page 3-8.
For the TCP/IP setting procedure, refer to “TCP/IP Settings” on 
page 3-46.
For the user authentication and account...

Specifying Settings From the Control Panel3
bizhub 500/420 3-143
Specifying Settings From the Control Panel
Chapter 3
Using Novell NDS
Before specifying the settings, prepare the information described below. The 
settings can be specified with Novell NDS Netware Server 4.0 or later.
Administrator password (required)
Default NDS tree name (required)
Default NDS context name (required)
List of the users for authentication (required)
!
Detail 
Do not use “ ” ” and “+” in the external server password. For...

3Specifying Settings From the Control Panel
3-144 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
– Specify “NDS” in External Server Type.
– Enter the NDS server tree name and context name.
2
Note 
To display the Administrator Setting screen, refer to “To display the Ad-
ministrator Setting screen” on page 3-8.
For the user authentication and account track setting procedure, refer to 
User’s Guide [Copy Operations].
Downloaded From ManualsPrinter.com Manuals 

Specifying Settings From the Control Panel3
bizhub 500/420 3-145
Specifying Settings From the Control Panel
Chapter 3
Using NTLM v1/NTLM v2
Before specifying the settings, prepare the information described below.
Administrator password (required)
Default domain name (required)
List of the users for authentication (required)
!
Detail 
Do not use “ ” ” and “+” in the external server password. For details on 
the operating conditions of an external server, ask the network adminis-
trator.
If “Password...