Key System U.S. Atlas Avm Jr Installation Programming Instruction Manual

							 Appendix C Atlas AVM JR. Installation and Programming Manual 9-3 DATES 
037 First 048 Twelfth 
038 Second 049 Thirteenth 
039 Third 050 Fourteenth 
040 Fourth 051 Fifteenth 
041 Fifth 052 Sixteenth 
042 Sixth 053 Seventeenth 
043 Seventh 054 Eighteenth 
044 Eighth 055 Nineteenth 
045 Ninth 056 Twentieth 
046 Tenth 057 Thirtieth 
047 Eleventh   
MONTHS 
058 Of January 064 Of July 
059 Of February 065 Of August 
060 Of March 066 Of September 
061 Of April 067 Of October 
062 Of May 068 Of November 
063 Of June 069 Of December  
						

							Appendix C  9-4 Atlas AVM JR. Installation and Programming Manual  
NO. SYSTEM MESSAGE 
070 …and…. 071 You have… 
072 …New messages 
073 …New message 
074 …Messages 
075 To retrieve messages, press 1. To change mailbox settings press 2. To send a 
message to press 8. To return to the main menu, press 9. 
076 You have no messages. 
077 Message saved. Please hold. 
078 To skip this message, press 1. To replay press 2. To save press 3. To forward 
press 4. To reply to message sender, press 5.  To delete the message, press 8. 
To return to previous menu, press 9. 
079 Message saved. 
080 Message deleted. 
081 Please enter a new four digit password. 
082 To delete skipped messages, press 8. To save all messages, press 9. 
083 …Yesterday… 
084 …Today…  
						

							 Appendix C Atlas AVM JR. Installation and Programming Manual 9-5  
NO. SYSTEM MESSAGE 
085 Please enter your Mailbox number. 086 Invalid Mailbox number. Please try again. 
087 Incorrect password. Please try again. 
088 Please record your personal greeting after the tone. Press the pound key when 
you have finished. 
089 Please record your name after the tone. Press the pound key when you have 
finished. 
090 Calls will be transferred to your extension. 
091 Calls will not be transferred to your extension. 
092 Please enter the mailbox number. 
093 You have reached the mailbox of… 
094 You have reached the mailbox number… 
095 Please leave a message after the tone.  When you are finished press star for 
further options or simply hang up. 
096 The dialed extension is busy. To reach another extension, dial ‘1’ and the 
extension number. To hold, dial ‘2’. To leave a message, dial ‘8’. To reach the 
operator, dial ‘0’.  To return to the Main Menu, dial ‘9’. 
097 There is no answer from the extension.. To reach another extension, dial ‘1’ 
and the extension number. To leave a message, dial ‘8’. To reach the operator, 
dial ‘0’To return to the Main Menu, dial ‘9’. 
098 We are sorry. No more messages may be recorded at the moment. 
099 The Voice Mail is in use. Please wait.   
						

							Appendix C  9-6 Atlas AVM JR. Installation and Programming Manual  
NO. SYSTEM MESSAGE 
100 A.M. 101 P.M. 
102 You have a call. 
103 The dialed extension is busy. To reach the operator, dial ‘0’. To reach another 
extension, dial ‘1’ and the extension number. To stay on hold, dial ‘2’. To 
return to the Main Menu, dial ‘9’. 
104 There is no answer from the extension. To reach the operator, dial ‘0’. To 
reach another extension, dial ‘1’ and the extension number. To return to the 
Main Menu, dial ‘9’. 
105 You have exceeded the maximum message length. The message will be 
transferred as is. 
106 Sunday 
107 Monday 
108 Tuesday 
109 Wednesday 
110 Thursday 
111 Friday 
112 Saturday 
113 O (i.e., eight-O-two for 8:02) 
115 Please leave your comments after the tone. Dial the pound key at the end.  
						

							 Appendix C Atlas AVM JR. Installation and Programming Manual 9-7  
NO. SYSTEM MESSAGE 
116 To change the remote notification mode, dial ‘1’. To enter your remote phone 
number, dial ‘2’. To hear the current remote phone number, dial ‘3’. To return 
to the previous menu, dial ‘9’. 117 Remote Notification is disabled. 
118 Remote Notification is enabled. 
119 You have a new message. Please dial ‘1’ to receive your messages. 
120 Please enter your remote phone number. Dial the pound key at the end. 
121 Your call to the requested extension cannot be completed at the moment. To 
reach the operator, dial ‘0’. To reach another extension, dial ‘1’ and the 
extension number. To leave a message, dial ‘8’. To return to the main menu, 
dial ‘9’. 
122 Invalid extension number. Please try again. 
123 Unsaved messages are deleted. 
124 To hear the current recording, dial ‘1’. To record, dial ‘2’.  To delete the 
current recording, dial ‘8’. To return to the previous menu, dial ‘9’. 
125 The recording does not exist. 
126 The Busy On-Time is… 
127 The Busy Off-Time is… 
128 To hear your current password, dial ‘1’. To change your password, dial ‘2’. To 
return to the previous menu, dial ‘9’. 
129 The message was received… 
  
						

							Appendix C  9-8 Atlas AVM JR. Installation and Programming Manual  
 
 
 
 
 
 
 
 
 
This Page Intentionally Left Blank.  
						

							 
Atlas AVM JR. Installation and Programming Manual 10-1 10. APPENDIX D  
SMDR E SMDR E   
When using the SMDR-E unit with either the KSX-32 or KSX-128 you should do 
the following: 
· 
Connect the RS-232 cable from the AVM JR. to the RS-232 Com 2 connector 
on the SMDR-E (labeled P1). 
Note: If you are attaching a caller id unit or InnFone call accounting system to the 
SMDR along with the voicemail you must remove pin 3 from the DB-9 
connector that attaches to the SMDR RS-232 port.  However, please contact 
technical support before doing this to verify your application 
· 
Set the dip switches as follows: 
1. Set to On (voicemail integration) 
2. Set to OFF (remote programming) 
3. Does Not Matter (serial call record output) 
4. Does Not Matter (print intercom calls) 
5. Does Not Matter (print alarm calls) 
6. Set to Off (remote programming type) 
7. Not Used 
8. Not Used  
						

							Appendix D  10-2 Atlas AVM JR. Installation and Programming Manual  
 
Figure 10-1 SMDR-E Diagram 
 
SMDR SMDR- -64/256 64/256   
When using the SMDR in either the KSX-64 or KSX-256 you should do the 
following: 
· 
Connect the RS-232 cable from the AVM JR. to the DB-9 to modular 
converter (supplied with the SMDR).  Connect DB-9 to modular connector to 
J3 on the SMDR using a six wire modular cord. 
· 
Set the dip switches as follows: 
1. Set to On (voicemail integration) 
2. Set to OFF (remote programming) 
3. Set to OFF (serial call record output) 
4. Does Not Matter (print intercom calls) 
5. Does Not Matter (print alarm calls)  
						

							 Appendix D Atlas AVM JR. Installation and Programming Manual 10-3 6. Set to Off (remote programming type) 
7. Not Used 
8. Not Used 
 
 
Figure 10-2 KSX 64/256 SMDR 
SMDR SMDR- -U (KDX U (KDX- -500) 500)   
When installing the AVM JR. on a KDX-500 you should do the following: 
· 
Connect the RS-232 cable from the AVM JR. to the DB-9 connector labeled 
CN10 (Com 3) on the right hand side of the main cabinet. 
  
						

							Appendix D  10-4 Atlas AVM JR. Installation and Programming Manual Figure 10-3 KDX-500 SMDR Dip Switches 
Figure 10-4 KDX-500 Side Connections