Inter-Tel Imx/Gmx 416/832 Installation Manual

INTER-TELPRAcTIcEs 
IMX/GMX 416/832 INST4LLATION & MAINTENANCE INS’E4LLATION 
Issue 1, November 1994 
Xgital Keyset Installation 
‘3 Install all digital keysets as follows: 
(1) Before mounting the modular jack assembly and 
connecting the keyset, measure the voltage on 
the YELLOW terminal of the modular jack 
assembly with respect to the BLACK terminal. 
(The “common” probe of the voltmeter is placed 
on the BLACK terminal.) It must measure a posi- 
tive voltage. If a negative voltage is measured,...

INSTALLATION 
Issue 1, November 1994 INTER-TELPRACTICES 
IMX/GMX 416/832 INSTALL,A~ON & MAINTENANCE 
FIGURE 3-62. DIGITAL KEYSET SELF-TEST KEY MATRIX 
STANDARD DIGITAL 
KEYSET EXECUTIVE DIGITAL 
KEYSET 
Page 3-108  

INTER-TELPRACTICES 
IMX/GMX 416/832 INSTALLATION & MAINTENANCE INSlXLLATlON 
Issue 1, November 1994 
Wall Mounting Digital Keysets 
7.6 
To mount the keyset on a wall: 
(1) 
(2) 
(3) 
(4 
(5) 
(6) 
Remove the keyset baseplate from the top half of 
the back of the keyset. 
Rotate the baseplate 1800 and attach it to the bot- 
tom half of the back of the keyset. 
NOTE: If a PCDPM is already installed inside 
the baseplate, first open the keyset and reroute 
the PCDPM-to-keyset interface cable through 
the...

INSTALLATION Issue 1, November 1994 INTER-TELPRACTICES 
lMX/GMX 416/832 INSTALLATION & MAINTENANCE 
b. Plug the AC transformer cable into the power 
connector (Pl) on the module. 
NOTE: PCDPMs do 
not require AC trans- 
formers when they are used for off-hook 
voice am~ounce only or have attached 
MDPMs. For a diagram of AC transformer 
requirements, see Figure 2-2 on page 2-29. 
c. Plug the main AC transformer unit into an 
available AC power source. Do NOT use the 
outlet for the equipment cabinet. @I...

INTER-TELPRACTXCES INSTALLATION lMX/GMX 416/832 INSlALLATION & MAINTENANCE Issue 1, November 1994 
FIGURE 3-63. DIGITAL PC DAT4 PORT MODULE (PCDPM) INSTALLATION 
INSIDE OF BASEPLATE BACK OF DIGITAL KEYSET 
M-232-C 
CONNECTOR 
TO DSS/BLF UNIT 
CONNECTOR 
TO MODEM DATA 
PORT MODULE 
POWER CONNECTOR 
TO AC TFiANSFORtvlER, 
IF NEEDED 
Q 
PCDPM-TO-KEYSET 
7. INTERFACE CABLE 
m 
Q 
IF THE KEYSET WILL BE WALL MOUNTED, OPEN 
THE BACK OF THE KEYSET AND REROUTE THE 
PCDPM-TO-KEYSET INTERFACE CABLE THROUGH 
THIS...

INS=TION 
Issue 1, November 1994 INTER-TELPRACTICES 
lMX/GMX 416/832 INSTALLATION & MAINTENANCE 
FIGURE 3-64. SAMPLE DIGITAL PCDPM CABLE CONNECTIONS 
PCDPM-to-MDPM 
INTERFACE CABLE 
PCDPM-*KEYSET (813.1588) 
INTERFACE CABLE 
(813.1587) 
4 
 /‘---------- 
 
PC DATA PORT 
MODULE 
* (INSIDE OF BASEPLATE) 
I 
. 
PCDPM-to-DSS /*- DSS-to-DSS 
INTERFACE CABLE / - INTERFACE CABLE 
(813.1595) , - (813.1519) 
ye i 
/ .I------- ‘. 
BACK OF DIGITAL 
KEYSET 
/ 
/-  
, 
. 
CONNECTOR 
(INSIDE OF BASEP 
San-m as the...

INTER-TELPRACTICES 
IMxlGMX 416/832 INSTALLATION & MAINTENANCE INSTALLATION 
Issue 1, November 1994 
Optional Modem Data Port Modules (MDPMs) 
7.10 Digital keysets equipped with PC 
Data Port 
Modules may be equipped with optional Modem Data 
Port Modules (part no. 550.3015). The MDPM contains 
a four-conductor modular jack that can be used to con- 
nect a data device (such as a personal computer with a 
direct-connect modem) or a single-line set to the keyset. 
7.11 The data device can be used by the...

INSTALLATION 
Issue 1, November 1994 INTER-TEL4PRACTICEs 
IMX/GMX 416/832 INSTALIATION & MAINTENANCE 
B. IMX 416/832 ANALOG KEYSET 
INSTALLATION 
7.14 
Before installing the IMX 24/12/8dine analog 
keysets, unpack each one and check for damage. If items 
are damaged or missing, contact Customer Support. 
Each keyset should have the following: 
Baseplate 
Extra key caps 
One six-foot, three-pair line cord 
One handset 
One four-conductor coiled handset cord 
Slide-out directory card 
Optional Liquid...

INTER-TELPRACTICES 
IMX/GMX 416/832 INSTALL4TION & MAINTENANCE INSTALLATION 
Issue 1, November 1994 
FIGURE 3-66. IMX 24/12-LINE KEYSET LCD INSTALLATION 
DISPLAY 
- 
WINDOW 
LCD 
- CONNECTOR 
RIBBON 
- 
CABLE 
- LCDUNIT 
Page 3-115  

INS’IALLATION 
Issue 1. November 1994 INTER-TELPRACTICES 
IMX/GMX 416/832 INSTALLATION & MAINTENANCE 
IMX 24/12/8-Lime Keyset Installation 
7.16 
Install all IMX analog keysets as follows: 
(1) Before mounting the modular jack assembly and 
connecting the keyset, measure the voltage on 
the RED terminal of the modular jack assembly 
with respect to the GREEN terminal. (The “com- 
mon” probe of the voltmeter is placed on the 
GREEN terminal.) It must measure +3OVDC 
(f2.OVDC). If -30VDC is measured, check...