Inter-Tel Imx/Gmx 416/832 Installation Manual

INTER-TELPRACTICES 
IMX/GMX 416/832 lNSTALLATION & -ANCE INSTALLATION Issue 1. November 1994 
(9) 
w-0 
(11) 
(12) 
(13) 
(14 
(15) 
At the C:\> prompt, enter “a:” and press the RB- 
TURN (or ENTER) key. (The monitor displays 
the A drive programming prompt “A\>“.) 
At the AZ\> prompt, enter “setup” and press RB- 
TURN. (The monitor displays the two installa- 
tion options - full [Fl or stand-alone/remote 
rw 
Use the up or down arrow keys to highlight “F” 
and then press 
RBTURN. (The monitor displays...

INSTALLATION 
Issue 1, November 1994 INTER-TELPRACTICES 
IMX/GMX 416/832 INSTALLATION & MAINTENANCE 
and .the initial option screen - PB Program- 
ming setup.) 
To access database programming, simply press 
the F3 key. Or, press ALT D to access the DB Pro- 
gramming pull-down menu and then select Pro- 
gramming Session by highlighting it (use the up 
or down arrow key, if necessary) and pressing 
REZURN. (The monitor displays a “Password 
Required” prompt.) 
Enter the appropriate programming password...

INTER-TELdPRACTICES 
lMX/GMX 416/832 INSTALLATION & MAINTENANCE INS’E4LLATION 
Issue 1, November 1994 
(13) 
04) 
(15) 
(16) 
(17) 
v-9 
I 
d. Use the up or down arrow keys to highlight 
“No Change” and then press RETURN. (The 
monitor displays two database options ---up 
date [v] or install [I].) 
Use the up or down arrow keys to highlight “I” 
and then press REIURN. (The monitor displays 
“WARNING!!! SETUP WILL DESTROY 
YOUR CURRENT DATABASE FILES”.) 
Press RETURN to continue. (The files from the...

INST4LLATION 
Issue 1, November 1994 INTER-TELPFtACTICES 
IMX/GMX 416/832 INs’rALLATION & MAINTENANCE 
D. INSTALLIN G STANDARD-SIZE SYSTEM 
SOFlWABE ON A BLANK HARD DISK 
DRIVE (IF NJZCJZSSARY) 
12.7 
If, for some reason, the hard disk drive installed 
in the equipment cabinet does not already have the sys- 
tem software installed, follow the procedure outlined 
below to install one of the standard-size system software 
packages. 
NOTE: To install the system software, the hard disk 
drive must be...

INTEFt-TELPRACTICES 
IMX/GMX 416/832 INSTALLATION & MAINTENANCE INSTALLA’lTON 
Issue 1, November 1994 
(17) 
08) 
(19) 
I 
I 
(20) 
NOTE: Do not change the displayed drive (A). 
Remove the Applications Setup Disk, then insert 
the Applications Software Disk (disk 3) in the 
floppy disk drive and press RETURN. (The files 
from the Applications Software Disk are copied 
onto the hard disk drive. When finished, the 
monitor displays “Insert the CP Software Disk 
(4) in the following drive”.) 
Remove the...

IR3XLLA’I’ION Issue 1, November 1994 INTER-TELPRACTICES 
IMX/GMX 416/832 INST4LI..ATION & MAINTENANCE 
E. INS 
TAILING EXPANDED mSTEM 
SOFTWARE ON A BLANK HARD DISK 
DRIVE (IF NECESSARY) 
12.8 
If, for some reason, the hard disk drive installed 
in the equipment cabinet does not already have the sys- 
tem software installed, follow the procedure outlined 
below to install the expanded software package. 
NOTE: To install the system software, the hard disk 
drive must be properly formatted and must have...

INTER-TELPRACTICES 
IMX/GMX 416/832 INSTALLATION & MAINTENANCE INSTALLATION 
Issue 1, November 1994 
(17) 
WV 
I 
I 
(19) 
monitor displays “Insert the CP Software Disk 
(4) in the following drive”.) 
Remove the Applications Software Disk, then 
insert the Call Processing Software Disk (disk 4) 
in the floppy disk drive and press RETURN. 
(The files from the Call Processing Software 
Disk are copied onto the hard disk drive. When 
finished, the monitor displays “Insert the Appro- 
priate Database Disk in...

HWTALLATION INTER-TELPRACTICES 
Issue 1, November 1994 IMX/GMX 416/832 INSTALLATION & MAINTENANCE 
13. PARKING THE HEADS ON 
MFM-TYPE HARD DISK DRIVES 
13.1 Before powering down the system when using an 
MFM-type hard disk drive, always, “park the heads” on 
the hard disk drive using the following procedure. This 
moves the heads off of the hard disk and helps to prevent 
damage to the disk when the system is powered back up. 
NOTE: IDE-type (Quantum Pro-Drive 4&W) hard disk 
drives are equipped with...

INTER-TELPRACTICES 
IMX/GMX 416/832 INSTALLATION & MAINTENANCE INSTALLATION 
Issue 1, November 1994 
16. POST-INSTALLATION CHECKLIST 
16.1 To ensure that the system has been installed prop 
erly, review the installation outline on page 3-3. Then 
review the items in the following list as a final check. 
- Equipment cabinet, MDF, and station locations, and 
cable runs meet environmental requirements and 
cable lengths are within loop limits. 
- Ferrite beads are installed on all station, trunk, and...

INTER-TELPRACTICES 
IMX/GMX 416/832 INSTALLATION & -ANCE 
CONTENTS PAGE 
1. Introduction ........................................................ 4-4 
2. Accessing The Features .............................................. 4-4 
. Feature Codes 
.................................................. 4-4 
B. Feature Keys ................................................... 4-4 
C SPCL And Flash Keys ............................................ 4-4 
D. ‘Dunk Access Codes...