HP Color LaserJet CP6015dn User Manual

							SizeDimensionsStacking2Angled
staple (left-
angled)Angled
staple (right-
angled)Two staples
(top or side)FoldingSaddle stitch
A4210 x 297 mm (8.27
x 11.69 in)  
A4 Rotated297 x 210 mm
(11.69 x 8.27 in) 11
Executive184 x 267 mm (7.24
x 10.51 in)     
Executive (JIS)216 x 330 mm (8.5
x 13 in)     
A3297 x 420 mm
(11.69 x 16.54 in)11
A5148 x 210 mm (5.83
x 8.27 in)     
A6105 x 148 mm (4.13
x 5.83 in)     
Statement140 x 216 mm (5.5
x 8.5 in)     
11 x 17
(Ledger)279 x 432 mm (11 x
17 in)11
12 x 18305 x 457 mm (12 x
18 in)     
B4 (JIS)257 x 364 mm
(10.12 x 14.33 in)11
RA3305 x 430 mm (12 x
16.93 in)     
SRA3320 x 450 mm (12.6
x 17.7 in)     
B5 (JIS)257 x 182 mm
(10.12 x 7.17 in)     
B6 (JIS)(128 x 182 mm)
(5.04 x 7.2 in)     
8K270 x 390 mm
(10.63 x 15.35 in)     
16K195 x 270 mm (7.68
x 10.63 in)     
8K260 x 368 mm (10.2
x 14.5 in)     
16K184 x 260 mm (7.2
x 10.2 in)     
8K273 x 393.7 mm
(10.75 x 15.5 in)     
16K196.8 x 273 mm
(7.75 x 10.75 in)     
Table 7-3   Supported paper and print media sizes for the optional HP 3-bin Stapler/Stacker and HP Booklet Maker/
Finisher accessories (continued)
ENWW Supported paper and print media sizes 87
 
						

							SizeDimensionsStacking2Angled
staple (left-
angled)Angled
staple (right-
angled)Two staples
(top or side)FoldingSaddle stitch
Banner(99 to 320 x up to
915 mm) (12.9 x
36 in)     
Envelope 9#98.4 x 225.4 mm
(3.88 x 8.88 in)     
Envelope 10#104.77 x 241.3 mm
(4.12 x 9.5 in)     
Envelope DL110 x 220 mm (4.33
x 8.66 in)     
Envelope C5162 x 229 mm (6.38
x 9.02 in)     
Envelope B5176 x 250 mm (6.93
x 9.84 in)     
Envelope C6114 x 162 mm (4.49
x 6.38 in)     
Envelope
Monarch98.42 x 190.5 mm
(3.88 x 7.5 in)     
Double Post
Card148 x 200 mm (5.83
x 7.87 in)     
1Booklet maker only2Stacking uses bins 1, 2, and 3 in the stapler/stacker, or bins 1 and 2 in the booklet maker.
Table 7-3
  Supported paper and print media sizes for the optional HP 3-bin Stapler/Stacker and HP Booklet Maker/
Finisher accessories (continued)
88 Chapter 7   Paper and print media ENWW
 
						

							Supported paper types
Table 7-4  Tray 1 paper information
TypeSpecificationsQuantityDriver settingsPaper orientation
Paper and cardstock,
standard sizesRange:
60 g/m
2 (16 lb) bond to
220 g/m2 (58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Equivalent to 100
sheets of 75 g/m
2 (20
lb) bond.
Plain or unspecifiedLoad preprinted or
prepunched paper
facing down, with the
bottom edge leading
into the tray, or toward
the front of the product
EnvelopesLess than 60 g/m2 (16
lb) bond to 90 g/m2 (24
lb) bond
Up to 10 envelopesEnvelopeShort edge leading,
flap toward the back of
the product, facing up
LabelsMaximum 0.23 mm
(0.009 in) thickMaximum stack height:
10 mm (0.6 in)LabelsSide to be printed on
facing down
TransparenciesMinimum 0.13 mm
(0.005 in) thickMaximum stack height:
10 mm (0.6 in)TransparenciesSide to be printed on
facing down
Heavy0.13 mm (0.005 in)
thickMaximum stack height:
10 mm (0.6 in)Light glossy, glossy, or
heavy glossySide to be printed on
facing down
GlossyRange:
75 g/m
2 (20 lb) bond to
220 g/m2 (58 lb) bond
Maximum stack height:
10 mm (0.6 in)Light glossy, glossy, or
heavy glossySide to be printed on
facing down
Photo media60 g/m2 (16 lb) bond to
220 g/m2 (58 lb) bond
Maximum stack height:
10 mm (0.6 in)Light glossy, glossy, or
heavy glossySide to be printed on
facing down
Cut sheet paper60 g/m2 (16 lb) bond to
220 g/m2 (58 lb) bond
Maximum stack height:
10 mm (0.6 in)Plain or unspecifiedSide to be printed on
facing down
Tough paper60 g/m2 (16 lb) bond to
220 g/m2 (58 lb) bond
Maximum stack height:
10 mm (0.6 in)HP Tough paperSide to be printed on
facing down
Banner paper Range:
75 g/m
2 (20 lb) bond to
220 g/m2 (58 lb) bond Maximum stack height:
10 mm (0.6 in)
Plain or unspecified Side to be printed on
facing down
CAUTION:Do not use banner media heavier than 120 g/m2 with the optional 3–bin stapler/stacker or
the optional booklet maker finisher. Heavy bann er media is not supported for these products.
Table 7-5  Trays 2, 3, 4, and 5 paper information
TypeSpecificationsQuantityDriver SettingsPaper orientation
Paper and cardstock,
standard sizesRange:
60 g/m
2 (16 lb) bond to
220 g/m2 (58 lb) bond
500 sheets of 75 g/m2
(20 lb) bond.
Plain or unspecifiedLoad preprinted or
prepunched paper
facing up, with the top
toward the front of the
tray or toward the left-
hand side of the tray.
LabelsMaximum 0.13 mm
(0.005 in) thickMaximum stack height:
54 mm (2.1 in)LabelsSide to be printed on
facing up
Transparencies Minimum 0.13 mm (0.005 in) thickMaximum stack height:
54 mm (2.1 in)Transparencies Side to be printed on
facing up
ENWW Supported paper types 89
 
						

							TypeSpecificationsQuantityDriver SettingsPaper orientation
Heavy0.13 mm (0.005 in)
thickMaximum stack height:
54 mm (2.1 in)Light glossy, glossy, or
heavy glossySide to be printed on
facing up
GlossyRange:
75 g/m
2 (20 lb) bond to
220 g/m2 (58 lb) bond
Maximum stack height:
54 mm (2.1 in)Light glossy, glossy, or
heavy glossySide to be printed on
facing up
Photo media60 g/m2 (16 lb) bond to
220 g/m2 (58 lb) bond
Maximum stack height:
54 mm (2.1 in)Light glossy, glossy, or
heavy glossySide to be printed on
facing up
Cut sheet paper60 g/m2 (16 lb) bond to
220 g/m2 (58 lb) bond
Maximum stack height:
54 mm (2.1 in)Plain or unspecifiedSide to be printed on
facing up
Tough paper 60 g/m2 (16 lb) bond to
220 g/m2 (58 lb) bond Maximum stack height:
54 mm (2.1 in)
HP Tough paper Side to be printed on
facing up
Trays 2, 3, 4, and 5 capacity:  54 mm (2.126 in) height or 500 sheets of paper, whichever is less.
Supported media types include: Cu t sheet paper, labels, OHT, glossy paper, glossy film, photo media,
and tough paper. Basis Weight: 60-220 g/m
2 (16-58 lb).
Duplex printing: Provides automatic two-sided printing (p rinting on both sides of the paper). Not
available on the HP Color LaserJet CP6015n model,  which cannot be upgraded to duplex printing. The
paper size range for automatic duplex printing is 175 to 320 mm (6.9  to 1
2.6 in) x 210 to 457 mm (8.3
to 18 

in). The media weight range is 60 to 220 g/m
2 (16 to 58 lb)
NOTE: HP Color Laser Presentation  Paper, Glossy (Q2546A, Q2547A)  is not supported with this
product. Using this type of paper can cause a fuser  jam that might require the replacement of the fuser.
Two recommended alternatives are HP Color LaserJe t Presentation Paper, Soft Gloss (Q6541A) and
HP Color LaserJet Brochure Paper, Glossy (Q6611A, Q6610A).
NOTE: For a complete list of specific HP-brand  paper that this product supports, go to www.hp.com/
sbso/product/supplies.
Table 7-5  Trays 2, 3, 4, and 5 paper information (continued)
90 Chapter 7   Paper and print media ENWW
 
						

							Special paper or print media guidelines
This product supports printing on special media. Use the following guidelines to obtain satisfactory
results. When using special paper or print media, be sure to set the type and size in your print driver to
obtain the best print results.
CAUTION: HP LaserJet printers use fusers to bond dry toner particles to the paper in very precise
dots. HP laser paper is designed to withstand this  extreme heat. Using inkjet paper not designed for this
technology could damage your printer.
Media typeDoDo not
Envelopes● Store envelopes flat.
● Use envelopes where the seam
extends all the way to the corner of
the envelope.
● Use peel-off adhesive strips that
are approved for use in laser
printers.●
Do not use envelopes that are
wrinkled, nicked, stuck together, or
otherwise damaged.
● Do not use envelopes that have
clasps, snaps, windows, or coated
linings.
● Do not use self-stick adhesives or
other synthetic materials.
Labels●Use only labels that have no
exposed backing between them.
● Use Labels that lie flat.
● Use only full sheets of labels.●Do not use labels that have wrinkles
or bubbles, or are damaged.
● Do not print partial sheets of labels.
Transparencies●Use only transparencies that are
approved for use in laser printers.
● Place transparencies on a flat
surface after removing them from
the product.●Do not use transparent print media
not approved for laser printers.
Letterhead or preprinted forms●Use only letterhead or forms
approved for use in laser printers.●Do not use raised or metallic
letterhead.
Heavy paper●Use only heavy paper that is
approved for use in laser printers
and meets the weight specifications
for this product.●Do not use paper that is heavier
than the recommended media
specification for this product unless
it is HP paper that has been
approved for use in this product.
Glossy or coated paper
●Use only glossy or coated paper
that is approved for use in laser
printers. ●
Do not use glossy or coated paper
designed for use in inkjet products.
ENWW
Special paper or print media guidelines 91
 
						

							Load paper and print media
You can load different media in the trays and then request media by type or size by using the control
panel.
Load Tray 1
CAUTION:To avoid jams, never add or remove  paper from Tray 1 during printing.
1.Open Tray 1.
2.Set the side guides to the correct width, and pull out the tray extensions to support paper.
3. Load paper in the tray with the side to be prin ted on face down and the top of the paper or non-
postage end facing the front of the printer.
NOTE: For Letter Rotated and A4 Rotated sizes, place the side to be printed on face down, with
the top of the page facing into the printer.
4. Make sure the stack fits under the tabs on the guides and does not exceed the load-level indicators.
5. Adjust the side guides so that they lightly  touch the paper stack but do not bend it.
92 Chapter 7   Paper and print media ENWW
 
						

							Print envelopes
If your software does not automatically format an envelope, specify Landscape for page orientation in
your software program or printer driver. Use the following guidelines to set margins for return and
destination addresses on Commercial #10 or DL envelopes:
Address typeLeft marginTop margin
Return15 mm (0.6 in)15 mm (0.6 in)
Destination 102 mm (4 in) 51 mm (2 in)
For envelopes of other sizes, adjust the margin settings accordingly.
Load banner paper into Tray 1
You can print banners from 457 mm (18 in) to 915 mm (36 in) in length and from 99 mm (4 in) to 320
mm (12.6 in) in width. See 
Banner printing on page 118.
CAUTION:Do not use banner media heavier than 120 g/m2 with the optional 3–bin stapler/stacker or
the optional booklet maker finisher. Heavy bann er media is not supported for these products.
Load Trays 2, 3, 4, or 5
Trays 2, 3, 4, and 5 each hold up to 500 sheets of standard paper or a 54 mm (2.13 in) stack of labels
or other thick paper.
Load standard-sized paper into Trays 2, 3, 4, or 5
The product automatically detects th e following standard sizes of paper in the 500-sheet trays: Letter,
Letter Rotated, Legal, Executive, 11x17, A3,  A4, A4 Rotated, A5, B4 (JIS), and B5 (JIS).
CAUTION:Do not print envelopes or unsupported sizes  of paper from the 500-sheet trays. Print on
these types of paper  only from Tray 1.
1.Slide the tray from the product.
NOTE: Do not open the input tray while it is in use. Doing so can cause jams in the product.
ENWW Load paper and print media 93
 
						

							2.Adjust the paper-width guide by squeezing the ad justment latch and sliding the guide to the size
of the paper being used.
3. Adjust the paper-length guide by squeezing the adjustment latch and sliding the guide to the size
of the paper being used.
94 Chapter 7   Paper and print media ENWW
 
						

							4.Load paper into the tray face up. Check the paper to  verify the guides lightly touch the stack, but
do not bend it.
NOTE: To prevent jams, do not overf ill the input tray. Be sure the top of the stack is below the
tray full indicator.
NOTE: For best performanc e, fill the tray complete ly without splitting the ream of paper. Splitting
the ream can cause a multifeed problem. The capacity of the paper tray can vary. For example, if
you are using 75 g/m
2 (20 lb) paper, the tray holds a full ream  of 500 sheets. If the media is heavier,
the tray will not hold a full  ream. Do not overfill the tray.
NOTE:If the tray is not adjusted correctly, an er ror message might appear or the media might
jam.
5. Slide the tray into the product. The control pane l shows the tray’s media type and size. If the
configuration is not correct, press the checkmark button 
 on the control panel. If the configuration
is correct, press the back arrow 
.
Load undetectable standard-sized  paper into Trays 2, 3, 4, and 5
The following undetectable standard-sized media is supported in the 500-sheet trays:
●Executive (JIS) (8.5 x 13)
● 12 x 18 (Trays 3, 4, or 5 only)
● B4 (ISO)
● RA3 (Trays 3, 4, or 5 only)
ENWW Load paper and print media 95
 
						

							●SRA3 (Trays 3, 4, or 5 only)
● B5 (ISO)
● RA4
● SRA4
● 8K 270 x 390 mm
● 16K 195 x 270 mm
● 8K 260 x 368 mm
● 16K 184 x 260 mm
● 8K 273 x 394 mm
● 16K 197 x 273 mm
CAUTION:
Do not print envelopes or unsupported sizes  of paper from the 500-sheet trays. Print on
these types of paper only from  Tray 1. Do not overfill the input tray or open it wh ile it is in use. Doing so
can cause paper jams.
Load custom-size paper into Tray 2, 3, 4, or 5
To use custom media, change the size setting on the control panel to  CUSTOM and set the unit of
measure, X dimension, and Y dimension. See 
Configure a tray to match print job settings
on page 99  for more information.
1. Slide open the tray from the product.
2. Load the print media as described in steps 2 through 4 of the “Load detectable (standard-size)
media into Tray 2, 3, 4, or 5” section.  Then proceed to step 3 in this procedure.
96 Chapter 7   Paper and print media ENWW