Home > Epson > Printer > Epson AcuLaser C2600N User Manual

Epson AcuLaser C2600N User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson AcuLaser C2600N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 473
    							Troubleshooting361
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    3. Push the latch on cover A to the left and open the cover until 
    it stops.
    4. If the optional Duplex Unit is not installed, gently pull out any 
    sheets of paper. Be careful not to tear the jammed paper.
     
    						
    							362TroubleshootingIf the optional Duplex Unit is installed, lift up the Duplex Unit. 
    Hold it and gently pull out any sheets of paper. Be careful not 
    to tear the jammed paper.
    w
    Warning:
    Be careful not to touch the fuser, which is marked CAUTION 
    HIGH TEMPERATURE, or the surrounding areas. If the 
    printer has been in use, the fuser and the surrounding areas 
    may be very hot. If you must touch one of these areas, open 
    cover A and B, then wait 30 minutes to allow the heat to 
    subside before doing so.
    5. Close cover A.
     
    						
    							Troubleshooting363
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    6. Pull out the standard paper cassette. Then pull the cassette 
    upward to remove it from the printer.
    7. Gently pull out any sheets of paper that have fed part way 
    into the printer.
     
    						
    							364Troubleshooting 8. Reinsert the paper cassette.
    9. Open the MP tray and reload the paper.
    Jam A, E, C2 (cover A, E, and optional paper 
    cassette)
    Follow the steps below to clear paper jams at cover A, C, and the 
    optional paper cassette.
    1. Remove all paper that is loaded on the MP tray. 
     
    						
    							Troubleshooting365
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    2. Close the MP tray
    Note:
    Close the expansion trays, if needed, before closing the MP tray.
    3. Push the latch on cover A to the left and open the cover until 
    it stops.
     
    						
    							366Troubleshooting 4. If the optional Duplex Unit is not installed, gently pull out any 
    sheets of paper. Be careful not to tear the jammed paper.
    If the optional Duplex Unit is installed, lift up the Duplex Unit. 
    Hold it and gently pull out any sheets of paper. Be careful not 
    to tear the jammed paper.
     
    						
    							Troubleshooting367
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    w
    Warning:
    Be careful not to touch the fuser, which is marked CAUTION 
    HIGH TEMPERATURE, or the surrounding areas. If the 
    printer has been in use, the fuser and the surrounding areas 
    may be very hot. If you must touch one of these areas, open 
    cover A and B, then wait 30 minutes to allow the heat to 
    subside before doing so.
    5. Close cover A.
    6. Open cover E.
     
    						
    							368Troubleshooting 7. Gently pull out any sheets of paper that have fed part way 
    into the printer.
    8. Close cover E.
    9. Pull out the optional paper cassette. Then pull the cassette 
    upward to remove it from the optional paper cassette unit.
     
    						
    							Troubleshooting369
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    10. Gently pull out any sheets of paper that have fed part way 
    into the printer.
    11. Reinsert the paper cassette into the optional paper cassette 
    unit.
    12. Open the MP tray and reload the paper.
     
    						
    							370Troubleshooting
    Printing a Status Sheet
    To confirm the current status of the printer, and that the options 
    are installed correctly, print a status sheet using the printer’s 
    control panel or the printer driver.
    To print a status sheet from the printer’s control panel, see  
    Printing a Status Sheet on page 281.
    To print a status sheet from the printer driver, for Windows, see  
    Printing a status sheet on page 98, or for Macintosh, see  
    Printing a status sheet on page 174.
    Operational Problems
    The Ready light does not turn on
    The printer does not print (Ready light off)
    Cause What to do
    The power cord may not be 
    properly plugged into the 
    electrical outlet.Turn off the printer, check the power cord 
    connections between the printer and the 
    electrical outlet, then turn the printer back 
    on.
    The electrical outlet may be 
    controlled by an outside switch or 
    an automatic timer.Make sure that the switch is turned on or 
    plug another electrical device into the 
    outlet to check whether the outlet is 
    operating properly.
    Cause What to do
     
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson AcuLaser C2600N User Manual