Comdial Executech 2000 Telephone System Instructions Manual

Integrated Call CostingIiW66-0683.13.14Typical 
SMDR Call Costing Report
Description:Thefollowingis anexampleofatypical SMDR cailcostingreport.10 
1X2/28/90 16:OS0.9201456710 1
l2/28/90 16:061.812017894567
10112/28/9016:081.512014785693
10112/28/9016:ll1.52012014563
10212/28/9016:12
0.55551212
10112/28/9016:13
1.12012013
$ 0.50
$ 1.35
$ 1.12
$ 2.50
$ 1.00
$ 0.50
Note1:Costedbyratetable18
Note2:
Costedbyratetable25
Note3:
Costedbyratetable11
Note4:Costedbyratetable1
3-78 

IMZ66-068Integrated Call Costing
3.13.15Typical SMDA Call Costing Report
Description:The following is an example of a typical SMDA call costing report.Station Report for Extension 
- 10
Date 
:DATE TIME
12/2816:05
12/2816:06
12/2816:08
12/2816: 11
12/2816:12
Z/2816:13
TOTp:
AVERAGES :
12/28/90Time:16:15
STATIONACCOUNT WGTH COST
100.9$0.50
101.881.35
101.5$1.12
101.5$2.50
100.5$1.00
101.1$0.50
5.8
$6.97
0.9$1.16I/O RING LINE 
-
012014567
0112017894567
0112014785693
012012014563
025551212
012012013...

SMDA ProgrammingIMIiX-068
3.14 Station Message Detail Accounting/Reporting
The system produces five different call cost reports for printing. They are as follows:
1.Detailed report of all station
2.Detailed report of all accounts
3.Trunk surmnary report
4. Department summary report5. All records
The system generates reports automatically for printing whenever it detects that its records storage area is 95 percent
full. You can use class of service programming to choose the reports that you want the...

IMI66-068SMDA Programming3.14.3 Station Message Detail Accounting (SMDA) Printout
Description:Call cost reports, produced by the system for printing, are generated automatically whenever the system
detects that the records storage area is ninety-five percent full. Program the system to automatically
generate these reports for printing at a certain time each day if desired.You can command the system to
print several different types of SMDA reports and to delete all stored SMDA records.
NOTE:The...

SMDA ProgrammingIMI46-068
3.14.5 Station Messa
(SMDR) Cost
B
e Detail Reporting
eporting
Description:Program the system for the SMDR to provide continuous printout of system-wide station call activity as it
is collected by the system.
Additional programming action will cause the printing of the cost of each
reported call to be included when the printout occurs.
To program:1.Dial 77 “SMDR PRINT ”
2.Dial 1YXXXXXX COSTING ”
3.Press Al to toggle between enable and disable (Al LED On = Enabled)
-OR-
Dial 1 to...

IMZ66-068SMDA Programming3.14.7 Station Message Detail Accounting (SMDA)
Deleted By The Attendant
Description:This programming step gives the attendant station the ability to delete SMDA records when commanded to
do so by its user. During day-to-day system operation, when SMDA records exceed storage capacity, the
attendant can delete current records to make room for additional ones if you perform this programming
step.Typically the attendant would do this after he or she has requested the system to print...

Toll RestrictinIMI66-0683.15 Toll Restriction Table Confimration
In order for toll restriction to take effect, you must perform all of the following functions:l
Program entries in one or more toll tablesl
Assign toll tables to all appropriate lines.l
Assign toll tables to all appropriate stations.
Description:After you program the toll tables, you must assign them to both a line and the station that uses that line
before the system will activate any programmed toll restriction at the station.
1.Determine...

IMZ66-068Toll Restriction
3.15 Toll Restriction ConfigurationNOTE: A lighted LED next to the programming button for the selection shows the choice you 
have selected.When
a single button provides a toggle 
(on/ofs) action, the lighted LED indicates the active feature.
The first step in any programming sequence is to enter the base level. Once in this mode, you can dial the feature
code for any desired configuration. Enter the base level with the following procedure: press 
ITCM then dial
H# 7 4 6 t.The...

Toll RestrictionIiWI66-0683.153 Assign Toll Restriction Tables To Stations
Description:Assign the toll restriction table to each appropriate station.
To Program:1.Dial 73 ‘ASSIGN TOLL-STA. ”
2.Dial 01 - 16 for toll tables 1-16 to be assigned to station
-OR-
Press Al - A14, Bl, B2 for tables l-16 (LED On = Selected table)
3.Dial #to finish entry
4.Select station ports to be programmed: Station 10 - 73, Dial 10 - 73 or press Cl0 - C73
5.Dial % for next toll table to station assignment,
-OR-
Dial +k % for...

Toll Restriction
3.15.5 Assi n Toll Restriction Tables
To&stem Speed Dial Calls
Description:When you enable this feature, the system applies toll restriction tables that you have assigned to a station to
the system speed dial calls that users make from that station.
‘. ;:,c
To Program:1. Dial 53 “STATION FEATURES”
2.Dial 05 “SYS SPD TOLL RST”
3.Select station ports to be programmed: Station 10 - 73, Dial 10 - 73 or press Cl0 - C73
4.Dial % for next station feature,
-OR-
Dial ?k +K for configuration...