Home > Comdial > Communications System > Comdial Executech 2000 Telephone System Instructions Manual

Comdial Executech 2000 Telephone System Instructions Manual

Here you can view all the pages of manual Comdial Executech 2000 Telephone System Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 121

Integrated Call CostingIMIc&068
3.13.3 Zone Call Band Tables (Long Distance Calls)
Description:
Example:
To Program:
In certain heavily populated geographic areas, different area codes exist within the same geographic
distance (zone) from the calling location. In these cases, use zone call band tables to cost calls based upon
the zone, or geographic distance, from the calling location.
The system measures all calls that do not match exception tables for the number of digits that the user dials.
It then...

Page 122

IiW66-068Integrated Call Costing
Y3.13.4 Area Code Band Table (Long Distance Calls)
Description:
Example:
To Program:
The system compares the long distance calls that do not match entries in zone call band tables to entries that
you have made in area code band tables. Area code band tables are the third priority level ofcosting for
long distance calls. Area code band tables 1 
- 7 are associated with call rate costing tables 1 1 - 17. Use
area code band tables to cost calls based upon the area code of...

Page 123

Integrated Call CostingIMI66-068
3.13.5Call Rate Tables (Local And Long Distance Calls)
Description:The system compares local calls and long distance calls that do not match entries in any exception table,
office code band table, zone call band table or area code band table with the entries that you have made in
any of the call rate tables 2 
- 33 and costs them accordingly.This is the thirdpriority level ofcosting for
local calls and thefourth ptiority level of costing for long distance calls. You can...

Page 124

IMI66-068Integrated Call Costing3.13.6 Discard Digits
Description:
Example:
To Program:
When the telephone system is installed behind a host system such as a PBX or CENTREX, users must dial
access codes before obtaining an outside line dial tone.To ensure that the system costs a call on just the
actual telephone number that the user dials, you should arrange for the system to ignore these access codes.
You can program up to six different access codes entries with up to eight digits per entry.
If the...

Page 125

Integrated Call CostingP
IMI66-0683.13.8 LCD Speakerphone Display of Costed Calls
Description:When you arrange the telephone system to cost the calls, you should also arrange for the LCD
speakerphones being employed with the system to display the cost of each call the user make from that
station.
To Program:1.Dial 53 “STATION FlXWRES”
2.Dial 27 “‘LCD CALL COST”
3.Select station ports for programming: Station 10 - 73, Dial 10 - 73 or press Cl0 -C73
4.Dial +i+ for next station feature,
-OR-
Dial +K +K for...

Page 126

Zn!iZ66-068Zntegrated Call Costing3.13.9 Call Costing Diagram
Figure 3.1 shows a flow chart for a costed call.
ALLWEoALLB
YES (LESS THAN 10 DlGlTsDIALED BUT NUMBER
PRECEEDED BY 1)
4CVBTCCMPUTEDusl”0 *NYMATCHEDCALL RATE
TABLE 2 
-23I
2sCALL RATE 
TABLES -FORZONEBANDSl-4
COSTCOUPUTEDLSING, ASCCIATEDCALL RATE
TABLES25-211AREA 
CQDEL] 4 BAHDTABLES
COBTCWPIJTEDUSINGASSatiATEDCALL RATE
TABLES
11.17
UAlcnYES
7-l
k_NDCOSTOJUPUI-EDus(NGuLLaA-rETABLEc+LABTR5oRTTABLE 1
Figure 3.1
3-73 

Page 127

Integrated Call CostingZMZ66-068
3.13.10 Call Costing--Local (Example)
Description:Assume that you have installed the telephone system where callers have an opporhmity to dial number
combinations that contain a common number sequence in both the area and office code (for purposes of
example, we have used 201). 
Figures 3.2-3.5 show examples of how the system costs different types of
calls.
Dialing Sequence 201~MM. The following sequence is a local cab (less than 10 digits) and 201 is the
office code....

Page 128

ZMZ66-068
. . .
Integrated Call Costing3.13.11 Call 
Costing-Lm Distance
With Of&e Code(Bxample)
Description:Dialing Sequence l-201-201~nnnn. The following sequence is for a long distance call (more than 10
digits) with 201 as both the area code and the office code. To cost this call, program call rate table 25 to
cost calls of this sequence.Also program the zone call band table adding office code 201 to area code 201
in band 1. Add any other desired office codes (for example 478) to area code band 1....

Page 129

Integrated Call CostingZMI66-068
3.13.12Call Costing Example--Long Distance (Example)
Description:Dialing Sequence 1-201~nnn-nnnn.The following dialing sequence is a long distance call (more than 10
digits) with 201 as 
the area code.To cost the following call, program call rate table 11 to cost calls in this
sequence. Also, program the area code band table adding area code 201 to band 1.
.”
EXCEPTIONYES (LESS THAN 
10ZONE CALL
BAND TABLESAREA CODE
BAND TABLESFigure 3.4
Call Rate Table 11
Number
Tier 1...

Page 130

IMI66-068Integrated Call Costing
3.13.13 Call Costing-Exception (Example)
Description:Dialing sequence mm-mm, 1-nnn-nnn-nnnn. Program call rate table 1 to cost call that do not match any
other programmed call rate table.
nnn-nnnn (except 201 -nnnn)or1 -nnn-nnnn (except l-201 -201 -nncor 1-201~nnn-nnn)
0.
OALL RATE TABLE --)ff UST RESORT
c*LL RATETABLES FOR mEA -GoDEBANosl-7
GALL RATE TD.BLEsFOR OFFICE WOE -UNos1-7
Figure 3.5
3-17 
Start reading Comdial Executech 2000 Telephone System Instructions Manual

Related Manuals for Comdial Executech 2000 Telephone System Instructions Manual

All Comdial manuals