Comdial Executech 2000 Telephone System Instructions Manual

ZMZ66-068Station Programming3.7.7 Automatic Hold
Description:When you enable this feature, the telephone user can automatically place an existing line call on hold when
she or he presses another line button to answer a second call.
To Program:1. Dial 53 “STATION FEATURES”
2. Dial 11 ‘AUTO HOLD 
”
3.Select station ports (LED On = Feature Assigned): Station 10 - 73, Dial 10 - 73
or press Cl0 - C73
4.Dial % for next station feature,
-OR-
Dial 9~ +t+ for configuration mode.
5.To change setting, repeat...

Station ProgrammingIMI66-0683.7.9 Automatic Privacy
Description:You can make a line private or non-private.In the private mode, a station has exclusive use of a line during
a call.This information is repeated in 3.6.3. You do not need to program this feature again if you have don
so in 3.6.3.
To Program:1.Dial 40 “PRIVACY RELEASE ”
2.Select line ports to be non-private (LED On = Non Private Port)
Line port 1-14 = Dial 01 - 14 or Press Al - Al4
Line port 15,16 = Dial 15,16 or press Bl, B2:~:;::Line port...

IMI66-068Stution Programming
3.7.11Call Forward On Busy/Ring - No Answer
Description:The system can automatically forward busy and ring-no answer calls.When a user places a call to station
A, for example, that call can be automatically forwarded to any other station associated either by intercom
hunt group or by department.Use this feature to arrange for calls to cycle rapidly through such associated
stations testing each one in turn with several rings.For this feature to work, you must program either...

Station ProgrammingIMI66-0683.7.12 Call Origin&on Denied
(Line Origination Denied)
Description:You can deny users of selected stations the ability to originate calls on specified lines. This feature does not
prevent the user from answering incoming calls on these lines.
To Program:1.Dial 54 ‘STALINE CONFIG. I’2. Dial 6 “ORIGINATION DENY”
3.Select line ports (LED On = Selected Ports)
Line port 1-14 = Dial 01 - 14 or press Al - Al4
Line port 15,16 = Dial 15,16 or press Bl, B2
Line port 17-24 = Dial 17 - 24...

ZklZ66-068
Y
Station Programming3.7.14 Data Security Port
Description:While port is active on a call, this feature prevents any incoming tones associated with other system
features from interrupting the call.
To Program:1.Dial 53 “STATION FEATURES”
2.Dial 26 “DATA SECURE PORT”
3.Select station port (LED On = Feature Assigned): Station 10 - 73, Dial 10 - 73
or press Cl0 - C73
4.Dial % for next station feature,
-OR-
Dial +K t for configuration mode.
5.To change setting, repeat procedure and make opposite...

Station Programming3.7.17 Executive OverrideIMI66-068
Description:You can provide selected stations with busy override, which allows the station to override a busy condition
at a station, sound a warning tone, and gain access to the existing conversation.
To Program:1. Dial 53 “STATION FEATURES”
2. Dial 02 
“‘EXEC. OVERRIDE ”
3.Select station ports (LED On = Feature Assigned): Station 10 - 73, Dial 10 - 73 or press Cl0 - C73
4.Dial % for next station feature,
-OR-
Dial +K 9~ for configuration mode.
5.To...

When you enable idle line preference, a station will automatically connect to any assigned and idle line
when the user takes the station off hook.
1.Dial 54 “‘STONE CONFIG. ”
2.Dial 7 “IDLE LINE PREF.”
3.Select line ports (LED On = Selected Port)
Line port l-14 = Dial O1- 1
Line port 15,16 = Dial 15,
Line port 17-24 = Dial 17 -
4.Dial # when all line ports are selected
5.Select station ports (LED On = Feature Assigned): Station 10 - 73, Dial 10 - 73 or press Cl0 - C73
6.Dial +K when all station ports are...

:You can program stations to ring in one of four distinctive tones:
1.5091610 Hz @ 10 Hz warble
2.7630016 Hz @ 10 Hz warble
3.509/610 Hz @ 19 Hz warble
4.76311016 Hz @ 19 Hz warble
1. Dial 53 “STATION FEATURES”
“‘RINGING TONE ”
3.Select ringing tone
Dial 
1 for tone 1“RINGING TONE I”
Dial 2 for tone 2“‘RINGING TONE 2”
Dial 3 for tone 3“RINGING TONE 3”
Dial 4 for tone 4“RINGING TONE 4 ”
4.
5.Select station ports (LED On = Feature Assigned) : Station 10 - 73, Dial 10 - 73 or press C10 - C73
Dial t for next...

St&ion Programming
3.7.19Flexible Ringing Assignments-
DirecffDelayed Ringing
Description:You must program ringing assignments on a per station/per line basis.You can control ringing for every
line that has appearance at a station-assigning immediate, or direct, ringing to some lines and delayed
ringing to others. This feature and all level 54 features are toggle on 
/ off.
NOTE: Do not program direct ringing for lines that you assign to the direct department calling feature.To Program: 1.
2.
Dial 54...

11111166-068
3.7.21 Flexible Ringing Assignments-
Night Ringing Mode
Description:After you have assigned Night Ringing to the stations and lines desired, you must enable the feature.
To Program:1.Dial 03 ‘NIGHT XFER Xxx ”
2.Press Al to toggle between enable and disable (LED On = Enabled).
-OR-
Dial 1 to enable (Al LED on). “NZGHTXFER ON ”
-OR-
Dial 2 to disable. “NIGHT XFER OFF”
3.Dial +K for configuration mode.
4.To change setting, repeat procedure and make opposite selection.
3.7.22 Flexible Ringing...