Comdial Executech 2000 Telephone System Instructions Manual

Y
Zn!lZ66-068
3.5.2Do Not Disturb (DND)
System Programming
Description:A telephone user can press a button to set the station to a DND condition.
To program:1.Dial 56 “BUTTON MAPPING ”
2.Dial 07 “ASSIGN DND CODE ”
3.Select button to be programmed: Press Al - A14, Bl - B3, or Dial 103 - 107
for B4 
- BS or 122 for Al5
4.Select station ports to be programmed with a DND button: Station 10 - 73, Dial 10 - 73
or press Cl0 - C73
5.Dial % for further DND button assignment
-OR-
Dial +K % for next button mapping...

Systen ProgrammingIMI46-068
3.5.5DTMF Dialing Feedback
Description:You can program either DTMF or monotone feedback during dialing.
To Program:1.Dial 27 “STATION FEATURES”
2.Press Al to alternate between monotone and DTMF feedback (Al LED on = monotone feedback)
-OR-
Dial 1 for monotone feedback
Dial 2 for 
DTh4F feedback
3.Press t for configuration mode.
3.5.6 Exclusive Hold
Description:This feature prevents a telephone user at one station from picking up a call that a user placed on hold at
another...

IMI46-068System Programming3.5.7 LCD Messaging
Description:You can create custom messages that telephone users can set at their stations. These messages are
displayed on any LCD speakerphone placing a call on the intercom line.
The system provides two standard
messages but you can use this programming procedure to create up to 10 custom messages. System
attendants also have access to this feature.
NOTE: You can enter any attendant programming with the base level entry of ITCM % #.
:_.’ ,-To...

System ProgrammingZMZ6&0683.5.8 Music On Hold
Description:When you connect an external music source to the system, it will provide music to all outside lines that are
placed on hold. You can disable the music using this programming procedure.
System attendants also have access to this feature.
NOTE: You can enter any attendant programming with the base level entry of lTCM +k #.
To Program1. Dial04“MOH XXXXXZX ”
2.Press Al to toggle between enable and disable (LED On = Enabled)
-OR-
Dial 1 to Enable (Al...

IMI46-068System Programming3.5.11 System Clock
Description:‘Ihe system clock maintains current date and time information. The system provides this information to
LCD speakerphones for display. Set the system time with this feature. The system attendant also has
access to this feature.
NOTE: You can enter any attendant programming with the base level entry of ITCM +k #.
To Program:1.Dial 01 “SET CLOCK ”
J .ONG FORMFORM
Dial 00 
- 99 for yr.- Dial 00-23 for hr.
Dial 01 - 12 for mo.- Dial 00-59 for min....

System ProgrammingIMZ66-068
3.5.13 Tandem Attendant
Description:When you enable this feature, a recall from an unanswered call transfer or timed hold recall will ring at
both attendant stations. When you disable it, only the attendant station that transferred the call will 
ring.
To Program:1.Dial 24 “TANDEM AlTN XXX ”
2.Press Al to toggle between enable and disable (LED On = Enable)
-OR-
Dial 1 to enable “TANDEM ATTN OFF”
Dial 2 to disable (Al LED is on) “TANDEM ATTN ON ”
3.Dial S for configuration...

IMI66068System Programming3.516 Timing Features-Call Park Recall Time
Description:
To Program:A call that remains in a parking orbit for a programmed length of time automatically returns to a timed hold
recall condition at the parking station.
Set the call park recall time with this programming feature.1. Dial22
C. P. RECALL X”
2.Select recall time:
Program button LED On = Selected Time
Press Al or dial 1 = 1 min.“C.P. RECALL X ”
Press A2 or dial 2 = 2 min.
Press A3 or dial 3 = 3 min.
Press 
A4 or dial 4...

System ProgrammingIMI46-0683.518 Timing Features-PA Port
Description:You can set PA ports to either timeout of the system for a programmed length of time or to remain on the
system as long as necessary without timing out. The system default is set for no timeout option.
To Program:1. Dial 92 “PA TIMEOUT”
2.Choose Timeout length:
Press Al or dial 1 = 30 sec.
Press A2 or dial 2 = 60 sec.
Press A3 or dial 3 = 90 sec.
PressA4ordial4=120sec.
Press A5 or dial 5 = 150 sec.
Press A8 or dial 6 = 180 sec....

ZMZ66-068System Programming
3.5.21 Timing Features-Timed Hold Recall
Description:
To Program:After a call has been on hold for a programmed length of time, the system will recall the station that pIa&
the call on hold.Set the hold recall time with this programming procedure.1. Dial14
HOLDRECALLXXXX2. Select time:
Dial 1 or Press AlHOLDRECALL30
Dial 2 or Press A2HOLDRECALL.60
Dial 3 or Press A3HOLDRECALL90
Dial 4 or Press A4HOLDRECALLI20
Dial 5 or Press A5HOLDRECALL180
Dial 6 or Press A8HOLDRECALL240
Dial...

System ProgrammingZMZ66-068
3.5.23 Feature Inhibit Programming
Description:You can disable certain features system-wide to provide a basic telephone system.This option is beneficial
in installations where a large proportion of the stations are accessible to unauthorized users. You can
re-enable any features that 
you disable with this procedure by performing the system default proce&re.
To Program:1.Dial 29 “FEATURE INHIBIT”2. Select feature.
Dial 01 to disable Line Group 1.
Dial 02 to disable Line Group...