Comdial Executech 2000 Telephone System Instructions Manual

Zn!lZ66-068Station Programming
3.7.41.6
Do Not Disturb (DND) Button
Description:
To Program:
Pressing the DND button prevents other stations from calling the DND station.
1.Dial 56 “BUTTON MAPPING ”
2.Dial 07 “ASSIGN DND CODE ‘I
3.Select button to be programmed: Press Al - A14, Bl - B3, or press 103-107 for B4-BS
or 122 for Al5
4.Select station ports to be programmed with a DND button: Station 10 - 73, Dial 10 - 73 or press
ClO-c73
5.Dial +E for further DND button assignment,
-OR-
Dial +K +K for next...

Station ProgrammingIMI66-0683.7.41.8
Dynamic Line Button
Description:
To Program:1.Dial 56 “BUTTON MAPPING ”2. Dial 16 “DYNAMIC KEYSX”
3.Press Al or dial 01 for A-field locations
-OR-
Press AS or dial 02 for B-field locations (B 1, B2, B3)
4.Select station ports to be programmed with a Dynamic line button: Station 10 - 73, Dial 10 - 73 or
press ClO-C73
5.Dial +K for further Dynamic Line button assignment,
-OR-
Dial % +K for next button mapping feature,
-OR-
Dial +++ % % for configuration mode.3.7.41.9...

IMI66-068Station Programming3.7.41.10
Line Group Button
Description:
To Program:
This button provides one-button access to a line group.
1.
2.
3.
4.
5.
6.
Dial 56 “BUTTON MAPPING ”
Dial 13 “ASSIGN LINE GRP”
Select button to be programmed: Press Al - A14, Bl - B3, or press 103-107 for B4-B8
or 122 for Al5
Dial 1 - 4 for line group 1 - 4 “ASSIkN LINE GRP X”
Select station ports to be programmed with GROUP button: Station 10 - 73, Dial 10 - 73 or press
ClO-c73
Dial +K for next line group button assignment,...

Station ProgrammingZMZ66-068
3.7.41.13Privacy Release Button
Description:A user engaged in a private call can press the privacy button to change a current call into a non-private one.
To Program:1.Dial 56 “‘BUTTON MAPPING ”
2.Dial 06 “ASSZGN PRIVACY ”
3.Select button to be programmed: Press Al - A14, Bl - B3, or press 103-107 for B4-B8
or 122 for Al5
4.Select station ports to be programmed with a PRIVACY button: Station 10 - 73, Dial 10 - 73
or press ClO-C73
5.Dial +I+ for further privacy release button...

IMI66-068Station Programming3.7.41.16
Zone Page/All-Call Button
Description:This button will provide a station with one-button access to all-call and zone paging.To Program: 1.
2.
3.
4.
5.
6.
Dial 56 “BUTTON MAPPING ”
Dial 09 ‘ASSIGN ZONE”
Select button to be programmed: Press Al - A14, Bl - B3, or press 103-107 for B4-BS
or 122 for A15
Dial 
1 - 3 for zone 1 - 3 “ASSIGN ZONE X”
-OR-
Dial 4 for all-call‘ASSIGN ALL CALL ”
Select station ports to be programmed:Station 10 - 73: Dial 10 - 73, or press Cl0 -...

Account CodesIMI66-0683.8 Account Codes
The ExecuTech 2000 telephone system uses account codes to identify calls by category, or by any other desired
grouping, primarily so that it can record the cost of the calls by that category or grouping. The account code can be
either verified or not verified by the system. When you enable account code verification, the system compares the
account code entered by a station user with the account entries that you have programmed.
Remember, it is always a good idea to...

zMz66-o68Account Codes
.._ ;3.8.3 Account Code List
Description:Use this programming feature to create the list of account codes for use.
To Program:1. Dial 75 “SMDA PROGRAMMING”
2. Dial 05 
“SEirACCT. CODE”
3.Dial account code digits. Maximum number of digits must be equal to number of account code digits
specified in previous programming step titled Account Code Length (Entered), 3.8.7.
4.To enter another account code, dial #, then dial its number
5.Dial +#+ for configuration mode.3.8.4 Account Codes...

Account CodesIMZ66-0683.8.5
Ac4cbTgt Code Me:sage Display Time
g-Disablmg
Description:You must enable or disable the account code message display time for both incoming and outgoing calls.
To Program:1. Dial 75 “SMDA PROGRAMMING”
2.Dial 11 for Incoming Calls.YXXXXXX INCOMING”
-OR-
Dial 12 for Outgoing Calls.‘XXXXXXX OUTGOING”
3.Press Al to toggle feature on or off (LED On = Enabled)
-OR-
Dial 1 to enable ‘ENABLE INCOMING”
Dial 2 to disable “DISABLE INCOMING”
4.Dial +++ S for configuration mode
5.To...

IMI66-068Account Codes3.8.7Account Code Message Length
Description:You can set the number of digits in a programmed account code.
To Program:1. Dial 75 “‘SMDA PROGRAMMING”
2.Dial 09 “MAk ACCT. CODE X”
3.Dial 3 - 8 for number of digits
4.Dial S f for configuration mode
5.To change setting, repeat procedure and make opposite selection.
Atcs
::.:..;. ,;I’..: ~:!:I,. . .,:i
3-55 

Direct Department CallingZn!fZ66-068
3.9 Direct Department Calling
Outside calls can be sent directly to a department where they system will search for any open station to send that call.
NOTE:A lighted LED next to the programming button for the selection shows which choice you have selected.
When a single button provides a toggle 
(on/ofl action, the lighted LED indicates the active feature.
3.9.1Direct Department Calling-Access Codes
Description:You can program department access codes to be any number...