Home > Comdial > Communications System > Comdial Executech 2000 Telephone System Instructions Manual

Comdial Executech 2000 Telephone System Instructions Manual

Here you can view all the pages of manual Comdial Executech 2000 Telephone System Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 141

System ProgrammingIMI46-068
3.16 Cassette TaDe Recorder Interface
Description:You can down-load configuration data from a programmed system to a cassette tape.You can use this
programming information for later reloading into the same system or for loading into the same model of a
different system.
Before you begin programming, make sure you have done all of the following:
Connect the audio cassette tape recorder microphone connector to the music interface jack on the side
of the common equipment.
Place...

Page 142

System Programming
To Program:1.To load previously recorded configuration data into the system to replace current values (Loading time
is approximately 10 minutes), Dial 80 “LOAD DATA”
2.To record current program values onto cassette tape for later use (recording time is approximately 12
minutes), Dial 81 “SAVE DATA ”
3. To abort load or record operation, Dial 82 ‘ABORTXFER”
4. To exchange current program values with recorded values, Dial 83 “SWAP DATA”
5. To compare recorded values with system values,...

Page 143

IMI 66-068System Records
System Programming Records
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
4.11
4.12
System Programming
Data Baud Rate4-l
Tone Voice Signaling4-l
Tandem Attendant4-l
Exclusive Hold4-l
System Monitoring4-l
PA Options4-l
LCD Messages
4-2System Speed Dial
4-2
Timing Features 4-3
Feature Inhibit ProgrammingLine Records 4-5
Station Records 4-6
Access Code Records
DISD Records
4- 14
Execumail Records4- 15
4-4
4-13
Direct Department Calling Records
Integrated Call Costing4-l 8
SMDA4-22
Toll...

Page 144

System RecordsDefault: I = 
BACKAT, 2 = CALL
ZMZ-66068
: I.’
..
4-2 

Page 145

IMI-66068System Records
..:. :+ ,:
:::.:.: ._’
4.2
3
S stem Programming -
iming Features
Recall/FlashTime
Default = 2 seconds
.08set.30setSOset.60set.75set.88set1.0set1.5set2.0set3.0~~
Pause Time.5 setl.Osec 1.5sec 2.osec 3.osec 5.osec 7.5 set 1osec 15 set 2osec
Default = I second
Timed
HoldRecallTime30set60set90set120set180sec240set300set360set420setNever
Default = 60 seconds
Unanswered Call
Transfer Recall Time
Default = 20 seconds25 
set 30 set 45 set
D For Stations
Unanswered CallTransfer Recall...

Page 146

System RecordsIMI-660684.3 System 
Propamming-
Feature Inhlbitin~
_ FEATURE
Line Grouo 1
Line Group 2
Line Group 3
Line Group 4
Zone 1 Paging
Zone 2 Paging
Zone 3 Paging
All Call
Meet Me Page
Night Transfer
Background Music
Voice Announce Block
Message Waiting
Call Pickup
Call Forward
1 DISABLED 1 ENABLED
Call Waiting
LCD Messaging
Executive Override/
Service Observing
Account Code
Personal Call Fwd.
Enable All FeaturesI
Default = all features enabledDo Not Disturb Inhibit-System Wide
Default = Inhibit...

Page 147

Line Records
Model Line Port
Block Programming
Start Lie PortEnd Line Port
III
:4-5 

Page 148

Station RecordsIMZ-66068
4.5 Station Configuration
(Use this sheet as an individual station record or as a record for a block of like-programmed stations. You can make
copies of this blank sheet as needed to meet the system capacity)
Model Station PortFirst Station Port
&ast Station Port
Block Prozramming
4-6 

Page 149

ZMZ-66068Station Records
Station Record
(Copy this record sheet as required for additional stations)Al 
\
z
A10
Al 1--DO0 o-- Al3
QQG3
84
83
B2Bl
86
B2Bl
0 Z-Line Monitor Telephoz0 6-Line Monitor TelephoneAl
All
III
PROG CODE
FUNCTION
BLKBlank
LXXLine 1-24
SXXStation lo-73
DND
Do Not Disturb
PRIPrivacy
IC2
Second Intercom1 STATION LOCATION:I
1 ACC
VABSAV
TGQ
ZPX
-AC
ACB
CF
CPX
TGx
1 Account Code
1 Voice Ann&nce Block
Save
1 Line Grow Oueue
Zone Page l-3
All Call
Automatic Call Back
Call Forward
Call Park...

Page 150

Station RecordsIMI-66068
Bl
Station Record
(Copy this record sheet as required for additional stations)
A0
EoAll
Al2
Al3
B2
1 STATION LOCATION:
14-Line Telephone
0 Speakerphone
q Monitor Telephone
CAJSO62
sxx
PRIDND
IC2
ACCPrivacyStation 
lo-73
Do Not DisturbSecond Intercom
Account Code
1 AC
SAV
ZPX
1 All Call
SaveZone Page l-3
ACBCFAutomatic Call Back
Call Forward
1 CPX1 Call Park Orbit l-9
TGx
VAB
TGQLine Group l-4
Voice Announce BlockLine Group Queue
DEFAULT SETTINGS - STATION 10: Bl-B&Line l-Line 8,...
Start reading Comdial Executech 2000 Telephone System Instructions Manual

Related Manuals for Comdial Executech 2000 Telephone System Instructions Manual

All Comdial manuals