Comdial Executech 2000 Telephone System Instructions Manual

ZMZ66-068Description Of System Features
:Automatic 
Privacy-3.6.3-
You can program a line to be private or non-private.In the private mode, a station has exclusive use of the line
during a call, and no other station can access that line unless the user includes the add-on station through the use of
the add-on conference feature.In the non-private mode, all stations with that line appearance can gain access at the
same time (sometimes known as common line pickup).
Use line class of service programming to...

Description Of System FeaturesIMI66-068Battery Back-up Interface
We have made it possible to attach a Comdial provided optional battery back-up kit to the common equipment.
Battery back-up will give full uninterrupted system power in case of an AC power loss. The switching and trickle
charge circuitry are in the common equipment, while batteries, chassis, and cable are packaged as a separate option.
When plugged into an active AC power source, the common equipment will constantly charge the attached...

ZA4Z66-068Description Of System Features
:_Call Forwarding-Busy /Ring-No-Answer-3.7.11-
The system can automatically forward busy or ring-no answer calls to a different station for answering.The system
sends these calls to any idle station associated either by intercom hunt group or by department.Call Forwarding-Personal
A user can forward just his or her personal calls to another station. For each personal call received with call forward
enabled, the system rings a short tone burst at the forwarding...

Description Of System FeaturesIMI66-068Call Transfer-Unscreened (with Automatic Camp-on to Busy Station)
A user can transfer an active call can without being announced. The transferred call will immediately ring at that
station if it is idle. If a user transfers a call to a busy station, the transferred call will automatically camp-on at the
busy station. If tbe user transfers additional calls to 
the busy station, the system places those calls in a camp-on
queue. When the user who has received all of...

ZMZ66-068Description Of System Features
Class Of Service Program Printout
We have provided connection terminals to interface an RS-232 compatible asynchronous serial data printer to the
system.The connected printer will provide a printout of class of service and toll restriction records.The data printer
service class of service programming determines the nature and extent of each requested printout. The system class
of service programming specifies the bit-length and baud rate of the data, 3 5.1.
Class...

Description Of System FeaturesIMI66-068Dedicated Intercom for 
Attendant-3.7.15-
This programmable feature ensures that an attendant at a principal call answering position will always have a free
intercom link to use for announcing the incoming calls to the stations. Intercom links can also be reserved for
exclusive use by any particular station in the system.
Defaults-3.4-
At initial power-up of the system, the operating features are set to a specific group of operating conditions (default
conditions)....

ZMZ66-068Description Of System FeaturesDirect Station Call Hold (Station Park)
This feature allows a station user to park a call at a specific station where it will be held without ringing. Users can
dial a feature code plus a station extension number over the intercom line to park the call, or you can program a
programmable button to provide a “directed hold” to a specific station. The directed station user picks up the parked
call by dialing a feature code. The call can be picked up at any station...

Description Of System FeaturesIMIW068Dual 
Intercom-3.7.43.12-
This feature provides two separate intercom lines at the same station.One intercom line is fixed, and a user can
access that intercom line by pressing the lTCh4 button.You can program the other intercom line,and a user can
access that intercom line by pressing the programmable button selected for that purpose. A user would handle calls
on the intercom lines in much the same manner as he or she would handle outside calls.Special considerations...

ZMZ66-068Description Of System FeaturesExternal Paging 
Interface-2.8.6- and -3.7.18-
You can program a station port or line port to interface with an external paging amplifier.Users can then access the
paging amplifier through the station port or directly through the line port from other stations in the system.The user
can dial DTMF tones through the line port to provide zone selection if provided by the external paging amplifier.
The line class of service programming arranges a line port for external...

Description Of System FeaturesZMZ66-068
G.Group Call 
Pickup-3.7.26
If a call rings to any station in a prearranged group, a user at another station in that group can dial a group pickup
code and answer the call.
H.
Handsfree Answer Inhibit
A user can press the MUTE button on a multiline station to block all handsfree answerback response.This
arrangement will prevent a station user from monitoring another station site using the monitoring ability of the voice
announce feature.When the user presses the...