Comdial Executech 2000 Telephone System Instructions Manual

STATION 10 - PROGRAMMING OVERLAY
l Cut out along border.
l Cut out shaded openings.
l Fit over station faceplate.Al
A2
A3
A4
A5
A6
A7
B8
B6
B4A8
5X20PRffiRAMMlffiA9OVERLAY
A10All
Al2
Al3
Al4
Al5
B7
B5
6620T 

STATION 10 - PROGRAMMING OVERLAY
l Cut out along border.
l Cut out shaded openings.
l Fitoverstation faceplate.
r
Alii8A2
A9
A3Al0
A4All
PPOO3-006
A5Al2
EXECUTECH XE SYSTEMPROGRAMMING OVERLAY
~ i.: ;,,‘;-
I
TAPSPKRMUTEw
HOLDBl82ITCM
6700s 

. . . .
PSTATION 10 
- PROGRAMMING OVERLAY
l Cut out along border.
l Cut out shaded openings.
l Fit over station faceplate.
Al
A2
A3
A4
TAP
SPKR
A9
A10All
T/C
MUTE
EXECUTECH XE SYSTEM
PROGRAMMING OVERLAY
PPoo3402
9394B596
HOLDAS (OTHER COB) Al2 (OTHER COB) ITCM
Bl (KEY MAPPING) 82 (KEY MAPPING)
6706XPERFORMING CLASS OF SERVICE
PROGRAMMING WITH A MODEL 6706X
TELEPHONE IS NOT RECOMMENDED
UNLESS ALL TELEPHONES INSTALLED
IN THE SYSTEM ARE MODEL 6706X
TELEPHONES. 

STATION 10 - PROGRAMMING OVERLAY
l Cut out along border.
l Cut out shaded openings.
l Fit over station faceplate.
A2A3
A4
A5
A6A9
Al0
.- Al2Al3
EXECUTE~~CHP~~yGRAMMAMlNG
PPOO3-003
SPKR
HOLD
BI92ITCM 

STATION 10 - PROGRAMMING OVERLAY
l Cut out along border.
l Cut out shaded openings.
l Fit over station faceplate.
41
42
13
A4
A5
A6
A73
Bl
A8
A95x14Al0
PROGRAMMING
OVERLAYAll
Al2
Al3
All
II
B2B3 - 

,.‘1., ..”. .:::-STATION 10 
- PROGRAMMING OVERLAY
l Cut out along border.
l Cut out shaded openings where necessary.
l Fit over station faceplate.
70 BUTTON 
DSYBLFPROGRAMMING OVERLAY
c70c71C72c73
c74c75C76c77c7ac79
C60C61C62C63C64C65C66C67C68C69
c51C52c53c54c55C56c57c5ac59
c41C42c43c44c45C46c47c4ac49 x
c31C32c33c34c35C36c37c3ac39
c21
c22
C23C24C25C26C27c2ac29
Cl0
Cl1
Cl2Cl3Cl4Cl5Cl6
Cl7cia
Cl9
DB70 

. . ..-.:.,.STATION 10 
- PROGRAMMING OVERLAY
l Cut out along border.
l Cut out shaded openings where necessary.
l Fit over station faceplate.
:25c41
;24c40
223c39PPoo3-004PROGRAMMING
OVERLAY222 EB32X C38
z21c37
220C36
319c35
318c34
317c33
216C32
Cl5c31
Cl4c30
Cl3c29
Cl2C28Cl1
C27Cl0
C26
32-BUTTON ADJUNCT
FEATURE MODULE
EB32X 

STATION 10 - PROGRAMMING OVERLAY
l Cut out along border.
l Cut out shaded openings where necessary.
l Fit over station faceplate.
703804-456
PROGRAMMINGOVERLAY
DB32S.
4c25 
c41c24 
c40C23 C39
C22 C38
c21 c37
C20 C36
Cl9 
c35
Cl8 C34
Cl-7 c33
Cl6 C32
Cl5 
C3lCl4 
c30Cl3 c29
Cl2 C28
Cll C27
Cl0 C26
w
32-BUTTON ADJUNCT
FEATURE MODULE
DB32S 

IMI66-068Descripion Of System Features
Description Of System Features
A.
Abandoned Hold Release-3.6.2-
When a distant party abandons a Hold condition (hangs up), causing an interruption in the line current, the system
will drop the line from hold and return it to service. You can program the time interval between hang-up and
line-drop between either 50 
msec. or 350 msec. This feature usually depends upon special arrangements that must
be made at the CO end of the connection.The line select indicator...

Description Of System FeaturesIMIG-068All-Call 
Paging-3.7.3-
All-call paging allows all stations, except 6701x, to receive announcements through the station speaker at once.
Origination of announcements must be via the station handset.You can program each station to receive and/or
originate all-call page. Also see--Zone Paging.All Intercom Links Busy Indication
When all intercom paths are busy, the system causes the intercom light at each station to be on steady. No class of
service progr
amming is...