Comdial Dxp Correspondance Instructions Manual

							DXP Correspondence ManualReview Answers
22. Polarity sensitive.
23. 66M-xx connector blocks.
24. False.
25. True. Grounding these pairs helps cut down on RF
interference.
26. False. You can install a paging device on Services board or on
a line port.
27.You can connect the modem to any serial data port.
28. With DIP switch 7 “on,” the system automatically sends the
initialization string to the modem in case of a power fail.
29. 500 Ohms.
30. False. You need one ring generator in each cabinet where you
have installed IST stations.
3 1.The station port simply provides a logical port for the PC
Attendant during DXP programming.
32.Rolling the wiring means that the transmit data wire connects
with the receive data wire (and visa-versa) between the two
modular jacks.
33. 500 feet.
34. Serial data port two is defaulted for the 
SMDABMDR.35. Yes.
36. One technician (not including the male narrator).
37. To send pages to people on the golf course.
Review Answers 16-5 
						

							Review AnswersDXP Correspondence ManualChapter Four:
Review Answers1. IMI66-088, DXP Programming Records
IMI66-087, VDT Programming Manual
2. With PCMMI, you don’t have to be directly connected to the
DXP to change the database.
3. False. You can do some DXP programming through a
telephone but not all of it.
4. False. The DXOPT COM card provides four additional serial
data ports (you can have a total of 16 serial data ports on the
DXP).
5.Port One:9600,8, 1,NoParity
Port Two:
300,7,2,NoParity
6.500 ft
short-haul modem
7.Dedicate a line for the modem or install a line switch for the
modem.
8.CTRL-N takes you to the next page, CTRL-P takes you to the
previous page, CTRL-T returns you to the main menu.
9.If you have not performed any programming within the
time-out period the system automatically logs out of the
programming menu, and you must re-enter the password.
10. System
Stations
Line
16-6 Review Answers 
						

							DXP Correspondence ManualReview AnswersChapter Five:
Review Answers1. The defaults menu lets you return certain elements of DXP
programming to their factory settings.
2. Three.
3. False. None of the master clear settings clear the serial ports.
4. False. You can default each COS individually.
5. Button map default.
6. 
SMDAEMDR records.
7. 30.
8. Restoring the database means that you are transferring the
database from a DOS file into a DXP.
9. True. You must have the expanded RAM card installed to
ensure proper save or restore operation.
10. 2
16
11.False. The serial data ports accept up to 9600 baud.
12. False. At default, each station can SOHVA within its own
group. Only group 16 can SOHVA all stations.
13. 500 (200 prior to Rev. 5)
14. System clock works for 
SMDA/SMDR records, day night
timing, and LCD speakerphone display.
15. False.
16. Section 5.11 defines all of the DXP timing features.
17. With system status reporting enabled, the DXP notifies certain
designated stations of system status conditions.
18. 21Hz
25Hz
19. 48.
20. This feature depends upon how you have programmed default
relocation response. If you set the programming choice to
“yes,” the station assumes the parameters from the original
station port; “no,”and the station assumes the parameters of
the new port.
Review Answers 16-7 
						

							21. Three.
22. True.
23. True.
24. False.
16-8 Review Answers 
						

							DXP Correspondence ManualReview AnswersChapter Six:
Review Answers1. False. The DXP has 32 classes of service.
2. False. COS 1 and COS 32 are defaulted differently from the
other classes of service..
3.A station user must dial a forced account code for a call to go
through; non-forced account codes are not mandatory.
4. Two.
5. Personal intercom and prime line.
6.Gives stations in a group the ability to pickup calls ringing at
other stations in that group.
7. False. LCD speakerphones that have interactive buttons
already have the DND override button.
8. Idle line preference means that a station automatically
connects to an idle line when the user lifts the handset.
9. False. The ring cadence is different for intercom and
outside-line calls.
10. Tone bursts.
11. Paging Transmit.
12. False. You can program six routes per ARS table.
13. 10: restriction levels 1-8, and deny all and allow all.
14. False. It’s probably not a good idea to let anyone but the
attendant have this feature.
15. Line Answer.
16.False. Periodic line tone is merely a reminder of call time; on
the contrary, once a station reaches the maximum call
duration time, the call is disconnected.
17. False. IST users can, if programmed, send an internal or
external hookflash.
18. Impact.
19. Quick transfer allows users to perform an automatic screened
or unscreened transfer without pressing their station’s
TRNS/CNF button.
20. 
8b.Review Answers 16-9 
						

							Chapter Seven:
Review Answers1. False. Personal intercom numbers are programmable.
2. 
20,7..
3. Eight.
4.False. You can include one personal intercom in a hunt list.
5. False.
6. Prime line: station automatically selects the line when the
station is off-hook,
Prime intercom: station automatically selects the intercom
when the station is off-hook,
Prime line group: station automatically selects the line group
when the station is off-hook.
7. False.
8. To ensure that at default, the voice mail equipment will have
sufficient time to answer a call before it rolls over to the next
port.9. Service observe allows a station to enter an in-progress call in
an unannounced, muted mode to monitor the conversation.
10. Call pickup groups stations to pickup an call at any other
station in their group.
11. False. Exception numbers are special numbers that would
normally be disallowed.
12. True.
13. False. These buttons are programmable.
14. Button mapping allows you to determine the function of the
buttons on a station.
15. Copy Model Programming.
16-10 Review Answers 
						

							DXP Correspondence Manual
Review AnswersChapter Eight:
Review Answers1. False. Line names can be no longer than seven characters.
2. Ground start lines help in preventing call collision.
.
3. True.
4. False. DID stands for Direct Inward Dialing.
5. False. You can also program a privacy release button that
releases the line from privacy mode.
6. 500r 350
7. 32
8. 16.
9. Immediate Start.
10. True.
11. True. DISA stands for Direct Inward System Access.
Review Answers 16-17 
						

							Review Answers
DXP Correspondence ManualChapter Nine:1
’Review Answers2.
3.
4.

						

							DXP Correspondence ManualReview AnswersChapter Ten:
Review Answers1. 95 percent.
2. Stations
Account Codes
Lines
All records
3. False. However, you must program the dialing time limit
(section 10.2)
4. False. Account codes can be used for incoming or outgoing
calls.
5. 16.
6. True.
7. Chronological order.
8. True.
9. 1000.
10. True.
11. True.
Review Answers 16-13 
						

							Review AnswersDXP Correspondence ManualChapter Eleven:
Review Answers1.False.
2.400 entries,brokendownto10entriesperpage.
3.Station Class of Service
1 through 8
~
4.False. The station’s number must be higher than or equal to
the toll restriction number.
5. 16.
6.Exception numbers are numbers that would normally be
disallowed by your toll-restriction programming. For
example, if you program l-804 as deny all, you can still
program l-804-978-2000 as an exception to that general rule.
7.You can assign up to 32 exception numbers to each station.
16-14 Review Answers