Comdial DIGITECH Digital Telephone System Instructions Manual

Press ITCM % # 7 4 6 + for base level.
FEATURE DESCRIPTION
Jne Group Queue Button: A station
Jser can queue for a busy line by
jressing a button that is programmed as
he line group queue button.
Recount Code Button: Press the
amount code button and then dial an
account code to record a call into a
particular catagory without interrupting
the call.ENTRY CODE AND PROMPTING DISPLAY
1. Dial 66.“BUTTON MAPPING ”
2. Dial 15.“ASSIGN LINE GRP Q”
3. Select button to be programmed:-Press Al 
- A14, Bl - 86.
4....

IMI 66-083System Programming z
NON - SQUARE SYSTEM REFERENCE RECORD
(Copy this chart for additional record space if add-on expansion modules are included with the system).,
1B2tB3iB4 tB5 iB6 iB7lB8 IA1I A2iA3 IA4 IA5 1~6 IA7 1~8~A9~AlO~A1l~A12~13~Al4~
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
IDEFAULTSEllINGS:Bl- B8= -Line 1 Line 8,and Al 21,=A2 19, A3==17, A4=15,AS 13,=A6=11,
A7 o 9,A8 = 22, A9 = 20,A10 I 16,...

E-A3 
-A4 
-
AS -A6 
-A7 
-Al
A2
A3
A4
A5
A6A7
STATION RECORI-
(Copy This Record Sheet As Required 
FSS Additional Stations)0
Ek
A60A9
0A10
0All
0Al2
0
Al3
0
Al4
B5
84
81A6
A9
A10
All
Al2
Al3
Al4
ED
STATION NAMF
STATION LOCATION
81
82
83
0 LCD
B6 
cl 10x14
87B6 cl 10x14
83
82
SpeakerphoneFlgure 4-l. Locatlon Of 
liuttons On
PROGRAMMED BUTTON FUNCTION
bEKer code on button chart)
..................Blank
Lnn...................Line 01
- 24
Snn..................Station
10- 57
DND.................Donotdisturb...

Press ITCM ++ # 7 4 6 * for base level.
FEATURE DESCRIPTION
itatlon-to-Statlon Port Reasslgnment:
The extension number and all other
)rogrammable attributes of a station that
ire initially assigned to a particular port
:an be reassigned to a different port by
xogramming action. This feature allows
adds, moves, and changes to be made
Nithout relocating the station wiring.
NOTE; Refer to automatic station
felocafion on page 4- 10 and
the station connections
discussion found on page 3-6.
Remember, the...

IPress ITCM +R # 7 4 6 +K for base level.I
‘EATURE DESCRIPTION
StatIon Dlsable: Station pork can be
disabled on a per station basis.
INTRY CODE AND PROMPTING DISPLAY
I. Dial 59.“DISABLE STATION!3
!. Select station ports to be disabled.
- Station 10 - 57: Dial 10 - 57.
1. Dial +k for configuration mode.REFERENCE RECORD
233955
244056
25
4157DEFAULT 
= NO STATIONS DISABLED
IPress SPKR to end.I 

DIRECT INWARD STATION DIALING (DISD)he 
DISD feature allows an external party to call an intercom station directly without assistance by the attendant. The DISD call must be received
n a line which has been specially programmed to allow this feature. Any line can be programmed to be a 
DISD line for both the normal mode of
peration and the night transfer (of ringing) mode of operation.
he number of rings which occurs on a 
DISD line before it is answered is programmable.
By setting a large number of...

f
Y
Press ITCM % # 7 4 6 t for base level.
‘EATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
1ISD Incoming Ring - Continued- Dial # then assign line pork to ring number.DISD INCOMING RINGSLine port 
1 - 14 = Dial 01 -14 or Press Al - Al4011 1213/415(6171819Line port 
15,16 = Dial 15, I6 or Press BI, 82DEFAULT = 0 RINGSLine 
port17-24=DialI7-24
-OR-
Press HOLD then press AI - A8
4. Press 
+k and repeat steps 2 and 3
for further 
DISD ring assignment.
-OR-
Press % % for configuration...