Home > Comdial > Communications System > Comdial DIGITECH Digital Telephone System Instructions Manual

Comdial DIGITECH Digital Telephone System Instructions Manual

Here you can view all the pages of manual Comdial DIGITECH Digital Telephone System Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 161

System OperationIMI 66-083
MAKING CALLS
OUTSIDE LINE CALLING
l Press line button to select line.
NOTE: Selecting a line is not necessary if:l
A priority line has been assigned to a telephone (prime
line feature enabled).l
The telephone automatically picks an idie line for use
when the handset is lifted (idle line preference feature
enabled).
l Listen for dial tone.
l Dial number.
When 
party answers,l Lii handset.
To end call,
l Hang up handset.
LINE GROUP ACCESS
If the system provides line groups,
l...

Page 162

IMI 66-083System Operatjon ,
To tone call a DSS number,
l Liit handset.
l Press programmable button that is programmed for
desired station.
l Press ITCM. Called telephone will ring.
NOTE: The lights 
(LEDs) adjacent to programmable
buttons indicate status of DSS telephones:
DARK indicates idle telephone, STEADY-ON
indicates telephone in use. FLASHING
indicates station is ringing (providing station
monitoring is enabled).
SECURE OFF-HOOK
VOICE ANNOUNCE (SOHVA)
To make a secure voice announcement to...

Page 163

System ‘OperationIMI 66-083SAVED NUMBER 
REDIAL
The first 16 digits of the last manually dialed number
can be saved for later redial.
To dial a saved number,
l Lii handset. Listen for dial tone.
l Press HOLD then press pre-programmed
To 
save the number,
lPress programmable button designated by class Of
service programming for this purpose.programmable button.HOLDING CALLS
MANUAL HOLD
To place call on hold,
l Press HOLD. Status light will flash for line calls.
Intercom hold causes intercom light to...

Page 164

IMI 66-083System Opera%on .
If the called party Is busy or does not answer,l
Press TRANSEONF button or flashing line button
to retrieve call.
UNSCREENED TRANSFER
To transfer a call to another station In the system,
l Press TRANS/CONF. (Outside call is placed on
hold automatically.)
l Dial extension number of party to be transferred (or
press 
DSS button for one-button intercom calling).
l Hang up handset. If transferred call is not received
after pre-programmed length of time, it will ring back
at...

Page 165

System OperationIMI 66-083
To receive message at an alerted station,
9 Observe flashing MW light.l 
Lit handset.
l Press 
ITCM HOLD.
l Connection to message desk is automatic.
LCD MESSAGING
System supplied messages can be set at a station to
be displayed by a calling LCD speakerphone
To turn on message,
l Press ITCM.l Dial 
% 02
l Dial message code number (1 - 0). See attendant
for list of messages available.
l Press MNTR (SPKR). Intercom light flashes.
The default messages of “BACK AT” and “CALL” may
be...

Page 166

MI 66-083System Operation .,RECALL/FLASH
FLASH
PBX, CENTREX and custom calling services may
require this feature.
If a system has been conflgured for flash,l
Press TAP to generate a timed flash signal.
RECALL
This feature provides disconnect and dial tone recall.
If a system has been configured for recall,
l Press TAP to disconnect current call and receive a
new dial tone for another call.
NOTE: A system can be configured for either flash or
recall but not for both.PAGING
EXTERNAL PAGING
Requires...

Page 167

System OperationIMI 66-083MUTE 
/ HANDSFREE ANSWER INHIBIT
To prevent distant party from hearlng while hand-
set Is lifted,
l Press MUTE. MNTR (SPKR) light will flutter.
To resume two-way conversation,
l Press MUTE. MNTR (SPKR) light will turn off.
TO block out handsfree answer Of intercom CalIS,
l Press MUTE. MNTR (SPKR) light will flutter.
To release handsfree answer of Intercom calls,
l Press MUTE MNTR (SPKR) light will turn off.PULSE/TONE SWITCHING
If the local telephone servlce Is pulse (rotary)...

Page 168

IMI 66-083System Operation ,
CALL FORWARD
A station user can designate another station to be the
recipient of just the intercom calls and prime line calls
that are directed to the user’s station or the recipient of
all calls that are directed to the user’s station.CALL FORWARD - ALL
To forward all calls to another telephone,
Press ITCM.
CALL FORWARD - PERSONAL
Dial + 5.
Dial extension number of station to which calls are to
be forwarded.
To cancel all call forward,
Press ITCM.Dial 
# 5.
NOTE: For each...

Page 169

System’OperationIMI 66-083SERVICE OBSERVING
A station can be programmed by system class of
service to allow the user to 
monitor a conversation at
another station in an 
un-announced and muted
manner.
l Press ITCM.l Dial # 03.
. Dial extension number of station to be monitored.
l Monitor the in-progress call.
To end observation,
l Press MNTR (SPKR).EXECUTIVE OVERRIDE
A station can be programmed by system class of.
service to allow the user to break into a conversation
at another station..
l Make an...

Page 170

IMI 66-083System Operatjon .
SPEAKERPHONE OPERATION
The optional speakerphone can use the previously
described features in a handsfree manner. Handsfree
calling and answering is as described below.
To place a call,
l Press line button or ITCM.l
Dial number or press programmable button.l
When party answers, speak toward the telephone.
To answer a call,
l Press a line button.
l Speak toward the telephone.
To end a call,
o Press SPKR.
To 
switch from speakerphone to handset,
l 
Ltt handset.
To 
switch from...
Start reading Comdial DIGITECH Digital Telephone System Instructions Manual

Related Manuals for Comdial DIGITECH Digital Telephone System Instructions Manual

All Comdial manuals