Comdial DIGITECH Digital Telephone System Instructions Manual

Sjlstem GperationIMI 66-083 

INTERCOM CALL PROGRESS TONES
(Heard through handset receiver or over monitor speaker)
Dial ToneContinuous on
Called station ring-backOne sec. on
and 3 sec. off.II
Base level80 msec. tone burst
wwmeWsounded once
Error tone -830 msec. tone burst
inam3ct entry
sounded three timesII
II
All-call and zone paging80 msec. tone burst
rotificatbn tonefollowed by 280 msec.
tone burstI
I
Busy tone
Override feature
not allowed
Nlgnt transfer feature
not allowed530 msec. tone bursts
sounded continuously
- 

uI
f
:all waiting toneThree 80 msec. tone bursts
sounded once
.nnn
Zalled station in do-not-140 msec.tone burst
disturb mode
sounded twice every
1.5 sec.
:all-back busy feature on260 msec. tone burst
sounded once
1
System is awaiting
80 msec. tone bursts sounded
memory dial number
continuously
or key mapping entry
n nnn
after location is specified
Override feature on
- warning tone
Six 100 msec tone bursts
’ sounded for 1.5 sec.;OHVA tone
USD ringback toneDual 440/480 Hz tone
sounded 1 
sec.on/l set...

LINE SELECT LIGHTS
Idle
Ringing
In use-your stationSteady off
Continuous flash
(560 msec. on 
- 560 msec. off)
Steady on with wink off
(2.3 sec. on 70 msec. off)
III
In use-other stationSteady on
On hold-your station
On hold other stationWinking with repeative off periods
(winking rate 
- 560 msec. off)
Continuous winking
(490 msec. on 
- 70 msec. off)
Exclusive holdSteady on 

ield call timeout your
station
Held call timeout otherContinuous flutter
station
(70 msec. on 
- 70 msec. off) Flutter with repeative off periods
(flutter rate 
- 560 msec. off)
MESSAGE WAITING LIGHT
Message Wafting
INTERCOM LIGHT
In use-your station
Auto redial active
Messaging display
Night mode
- Station 10 and 12Continuous flash (560 msec. on
- 560 msec. off)
IIII
Steady on with wink off(2.3
sec. on - 70 msec. off)
Flutter with repeative off periods
(flutter rate 
- 560 msec. off) 

IMI 66-083System OpeWion1
1
.-5 
- 27 

IMI 66-083
CHAPTER 6
MAINTENANCE
Maintenance
TECHNICAL AS~M&tAt$E AND REPAIRTECHNICAL ASSISTANCE
Should you experience difficulty with installation,
checkout, or programming, and have made an attempt
to isolate the problem using information provided
herein; or should you encounter problems at a later
date which cannot be resolved by referring to this
manual, call the 
Comdfal Technical Service staff.
They can be reached at l-800-366-8224 between the
hours of 8:00 AM and 8:00 PM Eastern time, Monday...

MaintenanceIMI 661083Wall Plate 
-Or-#10 Screws
, NOTE: AT&T 63oB Wall Plate is Recommended
For Secure Mount.
0
15/l 6”
Figure 6-l. Station Wall Mounting Details
6-2 

IMI SS-Ob3Index
PUBLICATION INDEXA
Abandoned Hold Release...............2-l, 4-10
AC Power Connection....................
3-3
AC Power Connection And System Grounding......
.3-4
Access Denied....................2-l, 4-38
Account Code Button................
.2-l, 4-48
Account Code Display...................
4-76
Account Code Operation.................
5-10
Account Codes......................
4-75
Account Codes Positive Verification............
.2-l
Add-On Expansion Module Configuration.........3-24
Add-On...

IndexIMI 66483
DDataBaudRate......................
.4-7
Data Communications...................3-29
Data Communications Interconnection Diagram.....
3-30
Data Device Connections..............
3-x),3-21
Data Printer Service....................
4-64
DataSecurity........................28
Data Security Port.....................4-34
Default 
- System, Line and Station.............44
Default Button Assignment................4-41
Default Functional Program.................2-6
Default Toll...