Home
>
Comdial
>
Communications System
>
Comdial DIGITECH Digital Telephone System Instructions Manual
Comdial DIGITECH Digital Telephone System Instructions Manual
Here you can view all the pages of manual Comdial DIGITECH Digital Telephone System Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 211
TAB091FEATUREBENEFIT ?rppott forWith software release 1 la, the DigiTech digital telephone system supports the use of the ,xecuMall voiceExecuMail voice processing system connected to the system’s station ports through the Comdialprocessing system ATI-D analog terminal interface.The ATI-D is a muttipurpose QB$QxB& accessory for the digital telephone system. It has dual circuits that allow the ExecuMail to interface to two station ports. Refer to Comdial publication lMl89-037, lnsfallation Instructions...
Page 212
TAB091FEATURE BENEFIT Support for 5. Select station ports to be programmed: ExecuMall voicestation 1 l- 57 = dial 11 - 57.processing system 6. Dial +% when all station ports are selected. - continued7. Dial +k t for next station/line ringing assignment or press SPKR to end. Delayed Rlnglng 1. Dial 54.“STA/LINE CONFIG.” 2. Dial 2.“DELAY RING - 3. Select line ports for delayed ringing: - line port l-14 = Dial 01 - 14 or press Al - A14, - line port 1516 = Dial 1516 or press Bl, B2., - line port 17 - 24 =...
Page 213
TAB091FEATUREBENEFIT ‘qlpport forHUNT GROUPS (Option) ,xecuMail voiceprocessing system When a station port that has been assigned to a hunt group is busy, a call to it will ring at the next - continuedidle station port in the group. A call will try to ring every port in a hunt group and if all are busy, the telephone system will return a busy tone to the caller.A programmer can assign all ExecuMail ports to a circular hunt group to take advantage of its multiple-port interface capability. Make a circular...
Page 214
TAB091 STATION 10 - PROGRAMMING OVERLAY . Cut out along border. l Cut out shaded openings. l Fit over station faceplate.Al A0 A2A9 PPO13-100 A3A10 A4 DIGITECHAl 1(REV I OR HIGHER1 A5 .PROGRAMMING A1 2OVERLAY HOLD Bl82 83
Page 215
COMDlnL Made m in the USA TECHNICAL ADVISORY BULLETIN Date: JUIY 1991ksue: TAB080 SOFTWARE ENHANCEMENTS FOR THE DigiTech DIGITAL TELEPHONE SYSTEM This bulletin discusses the following software enhancement and programming clarification for the DigiTech digital telephone system:l Support for dual 32-button consoles l Button mapping with a DigiTech 7700s~xx LCD speakerphone Availability of this enhancement is as follows: SYSTEMBASE UNIT PRODUCT CODECO408 GO408 All Revisions CO81 6GO81 6 All Revisions Cl...
Page 216
DigiTech Software EnhancementTAB080 FEATUREBENEFITt 11The first console (the one installed at the logic-paired port) extends the autodial buttons of the paired Consoletelephone by 32 and provides DSS/BLF coverage for station ports 10 through 41. Additionally, the Featurefirst console provides COS programmlng buttons Cl0 through C41 when needed.Refer to the -continuedprogramming overlay that is included at the end of this publication. The second console (the one installed at the programmed station port)...
Page 217
TAB080DiqiTech Software Enhancement FEATURE Dual Console Feature - continued BENEFITSTATION 10 PROGRAMMING To program a station port for the second-console feature, 1.Press ITCM and dial * # 7 4 6 ++ COW/G. MODE 2.Dial 53 for station features.STATION FEATURES 3. Dial 34 for second console.SECOND CONSOLE 4. Assign console to station. - Type console port number then type station port number that console is to be assigned to.5. Press SPKR (MNTR) to end. To clear a second-console feature assignment, 1....
Page 218
DigiTech Software EnhancementTAB080 STATION 10 - PROGRAMMING OVERLAY l Cut out along border. ‘it over station faceplate. PPO16-000 PROGRAMMING OVERLAY, DD32X --- t --- f C57 \ I /--- ---’ C25 t Ml : ---__-__-- ;; C25 C41 , II C24 C40 t III f C23 C39 / I1 i C22 C38 j : C24 1 C40 1 ; C23 C39 ’ ---I-; C22 C38 1 II; c21 c37 1II C21 1 C37 iI c53 1 G--t-T I i C20 C36 II/ C20 1 C36 ; I1 Cl9 c35 ; ICl9c35 ;.i c51 1 i ‘/: Cl8Ic34 tjI c50 j p17 /c33 ;j Cl7c33f; c49I --t-f; c40I1 Cl6 1 C32 Ii Cl6 1 C32 I -cl5 1...