Home > Comdial > Communications System > Comdial DIGITECH Digital Telephone System Instructions Manual

Comdial DIGITECH Digital Telephone System Instructions Manual

Here you can view all the pages of manual Comdial DIGITECH Digital Telephone System Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 201

DigiTech System Software EnhancementsTAB 099
FEATURE
Account
Codes (cont.)
BENEFITS
VDT COS PROGRB
1. Enter COS programming
2.Enter 1 for system COS programming
3.Enter 8 for SMDA programming
4.Enter 6 for account codes
To set account codes,
l Enter 1
lIf the Verified Account Code Length is 3, the system will prompt you to “Enter Account
Codes (0 
- 999)”
lType in valid account code(s), delimited by commas
If you enter fewer than three digits, the system will assume leading zeros
lIf the Veriiied Account...

Page 202

, TAB 099DigiTech System Software EnhancementsFEATURE
-:ount
_ 
/des (cont.)BENEFITS
VDT COS PRO-
To disable account codes,l Enter7
To enable account code display for incoming calls,l Enter8
To disable account code display for incoming calls,l Enter9
To enable account codes display for outgoing calls,l Enter 1 0
To disable account code display for outgoing calls,. Enter 1 1
To set the account code message display time,. Enter 1 2
.Type in display time (l-20 seconds)
To set the maximum account code...

Page 203

DigiTech System Software EnhancementsTAB 099
FEATURE
Account
Codes (cont.)
BENEFITS
To display a list of stored emergency numbers,
lEnter 1 7 (if there are no emergency numbers already stored, the system will respond
“Table is Empty”)
To return to the previous menu during programming,l Enter 1 8
To print out all information pertaining to account code programming,
l Enter COS programming
l Enter 1 for System COS
9Enter 6 for COS Data Printout
lEnter 7 for Toll Restriction Data Printout; the system will...

Page 204

i TAB 099DigiTech System Software Enhancements
FEATURE
,- ‘rer ID (cont.)
BENEFITSINSTALLATION NOTES
All Caller ID features require the delivery of Caller ID data to the input Port B. This port must be
configured to match the output of the Caller ID decoder device. The recommended configuration
is 9600 baud, with eight data bits and one stop bit. You can configure the port either from the
terminal Class of Service programming menus, or from station 10 or 12.
You have the option to provide Caller ID...

Page 205

DigiTech System Software EnhancementsTAB 099
FEATURE
Caller ID (cont.)
BENEFITS
STATION 
10 PRO-
1.Press ITCM +k # 7 4 6 % to enter COS programming
2.To assign Caller ID lines,l Press47
l Dial line number(s)
3.To assign Caller ID stations,
lPress 5 3 for Station Features
lPress 3 6 for Caller ID stations
l Dial station number(s)
4.To set the Audible First Ring feature,l Press 1 7
lPress 0 1 for Audible First Ring Option
lPress 1 to silence the first ring on Caller ID lines
lPress 2 to enable Audible...

Page 206

TAB 099DigiTech System Software Enhancements
FEATURE
r “er ID (cont.)BENEFITS
VDT PROGR-
To define your local area code,l Enter 5
lEnter Y if displayed area code is correct
or
.g,ner N if displayed area code is incorrect, then enter the correct three-digit area
To define your local office codes,l Enter 6
.Enter 1 to define a new local office code, then enter six sigits or five digits plus a
wildcard character (#)
lEnter 2 to delete the local off ice code last displayed
lEnter 3 to display the next office...

Page 207

Diailech System Software EnhancementsTAB 099
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Sta
#
1000
12
10
10
10
10
Llne
#
12
3
1
1
4
4
10
l(D)
DateTime
10/15/9204:38
1 O/l 5l9200:56
10/15/9200:56
10/15/9200:56
1 O/l 5/9201 :oo
1 O/l 
5/9201 :oo
1 O/l 519204:23
1 O/l 519204:19call
length
0.1
0.2
NOANS
0.1
NOANS
0.1
0.2
0.2
AlIS
time
.2
.l
.2
.O
.l
.l
Called or
Calling #
1234567890123456
99736243
I973 3437
I973 3437
I973 3694
call
cost
$0.51
$0.00
$0.00
L
(1) outgoing call
(2) outgoing call
(3) unanswered incoming...

Page 208

COMDIAL
Made LigE in the USA
TECHNICAL ADVISORY BULLETINDate: JUNE 
1992kW?:TABOSlA
SOFTWARE ENHANCEMENTS FOR
THE DIGITECH DIGITAL TELEPHONE SYSTEM
This bulletin discusses the software enhancements and feature additions for the DigiTech digital telephone system that
are available with software releases 10 and 11 A.
Software release 10 provides the following enhancements:
l Additional dial time for the DISD optionl
Changed defaulted first choice signalling style for intercom callsl
Supports both on-hook...

Page 209

TAB09 1FFEATUREBENEFIT
I,:,
‘upports bothWith previous software, users were required to lift the handset of a speakerphone before they
,n-hook and off-hook could make a voice signalled intercom call. This software release allows a station user to perform
call announcing from
speakerphoneseither a on-hook or an-off-hook call announce from a speakerphone.
Enhanced secure
off-hook voice
announce 
operation
Expanded personal
rlng tone 
choice
Simplified hybridoperation
Enhanced automatic
call back
Support...

Page 210

TAB09 1
FEATUREBENEFIT
Support for DiglTechThere are several items that the installer/programmer needs to consider when installing thetelephones wlth a
revision I and later DigiTech telephone to a DigiTech system. These items are detailed below.revision letter of I or
later 
- continuedti While the DigiTech system with software release 11 a and later supports the use of all DigiTech
telephones regardless of their revision letter, any systems with a software release of 9 or earlier
will not support the...
Start reading Comdial DIGITECH Digital Telephone System Instructions Manual

Related Manuals for Comdial DIGITECH Digital Telephone System Instructions Manual

All Comdial manuals