Home > Comdial > Communications System > Comdial DIGITECH Digital Telephone System Instructions Manual

Comdial DIGITECH Digital Telephone System Instructions Manual

Here you can view all the pages of manual Comdial DIGITECH Digital Telephone System Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 81

Press ITCM +k # 7 4 6 +k for base level.I
FEATURE DESCRIPTION
hxlliaty Llnes: A line port can be
:onditioned to serve as a port for an
sxterflal paging amplifier.
kWal Off Ice Llnes: A line port can
38 conditioned to serve as a port for a
standard telephone company supplied
zentrai office line.
Llne Names: Lines can be named as
to their function to identify them for use.
Names such as WATTS, CO, etc.,
when appearing on the display, make
locating a desired line easier for the
station user to do. Up to...

Page 82

rPress lTCM +k # 7 4 6 % for base level.I
‘EATURE DESCRIPTION
Ine Groups: Outside lines of the
ame type-can be grouped together for
ial-up outgoing access. Access codes
)r the line groups are:
Group 1 
= Dial 9
Group 2 
= Dial 81
Group 3 = Dial 82
Group 4 = Dial 83
JO773 System must be strapped for
hybrid operation, as detailed in
Chapter 3, before 
this
programming feature is
available. A line group queue
button can be assigned on a per
station basis as detailed on page
4-48.
Line Groups - continued on...

Page 83

f.
PresslTCM~#7466 for baselevel.
‘EATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
Ine Groups - continuedIO. Dial 4 for Line Group 4.“L/NE GROUP 4”
(LED On = Lines Assigned)
11. Select line ports to be disabled
(LED On = Disabled).
Line port I-14 
= Dial 01 - 14 or Press Al - Al4
Line port 15, 16 = Dial 
15,16 or press Bl , 82
Line port 17-24 = Dial 17 - 24
-OR-
Press HOLD then press Al - A8.
12. Dial % for next group.
-OR-
Dial +k +k for configuration mode.
UWToneSwltchable:...

Page 84

4bandoned Hold Release: When a1. Dial 38.“HOLD RELEASE 50 ”
listant party abandons a hold condition2. Select hold release time for line ports.
md disconnects, the central office will(LED On = 50 msec.)
;end a forward disconnect signal to theLine port l-14 = Dial 01 - 14 or Press Al - Al4
;ystem. The signal can be either 50Line port 15,16 = Dial 15,16 or press Bl, B2
nsec. or 350 msec. in length. ProgramLine port 17-24 
= Dial 17 - 24
he system to match the central off ice
-OR-
ime.
Press HOLD then press...

Page 85

f
ii
rPress ITCM +K # 7 4 6 8 for base level.
:EATURE DESCRIPTION
utomatlc Privacy: A line can be
lade private or non-private. In the
rivate mode, a station has exclusive
se of a line during a call. Lines are
rivate unless re-programmed making
iem non-private.
IOTE: P rugram a station button to actas a privacy release button as
detailed on page 4-43.
Llne To Llne Port ReAsslgnment:
-he programming attributes for a line
hat is connected to a particular line
art can be m-assigned to a different
ne port by...

Page 86

Press ITCM + # 7 4 6 ++ for base level.I
FEATURE DESCRIPTION
Block Programmlng 
- continued
L
ENTRY CODE AND PROMPTING DISPLAY
REFERENCE RECORD
“BLK PROGRAMMING ”
2. Select model line port with keypad.
“MODEL LINE 
XX
2. Select line ports to be disabled
Line port 1 
- 14 = Press Al - Al4
Line 
Port 1516 = Press Bl ,B2
Line Port 17 - 24 = Press HOLD thenpress Al 
- A6
3. Dial first line port in block (dial code as above).
4. Dial 
#.
5. Dial last line port In block (dial code as above).
6. Dial 
#.
7....

Page 87

Table 4-l. CHARACTER DIALING CODES CHARTI 
CHARI CODE I CHARI CODE I CHAR ICODE I
A21a
24Space12
B22b25-15C
23C26.17t DI
l3i
I
IdI34I /-(18t
E32r351191F
33
36.
G41944 I
H42h45 :
I II43IiI46I1
i52k553
L53I564
il iiim645
N62
n656--
16 (63II ~~
!0166
IP1711 DI74
R72r750
S73S76T
81t84
U82U85
V83v86
w91W94I
X92X95
Y93Y96Z
13z
16 

Page 88

STATION CONFIGURATION
lark the desired selections in the charts to record programming needs. (Make copies of the pages to provide additional records if needed.
Mditional records may be needed when add-on expansion modules are employed to extend the station capacity of a base unit.)Dial the feature
zode and then dial the selection code or press the programrnfng button to program the selection.
NOTE: Acurrent
provided
&
rugram setting is indicated by a lighted LED next to the programming button for that...

Page 89

f
E
Press ITCM ++ # 7 4 6 t for base level.
FEATURE DESCRIPTION
Flexlble Station Numberlng: 
The
;ystem supports a flexible station
numbering plan for calling individual
stations and departments. Each station
:an be programmed to respond to the
dialing of any available number between
10 and 7999; however, the same dialing
zode cannot be assigned as both a
station extension number and a
department access code, nor will the
system allow an extension number or
access code conflict such as 15 and
1500 to be...

Page 90

IPress ITCM ?& # 7 4 6 +Ic for base level.I
FEATURE DESCRIPTION
ixecutlve Overrlde: Selected stations
an be provided with busy override. This
zature allows the station to override a
lusy condition at a station, sound a
rarning tone, and gain access to the
bxisting conversation.
10 Not Dlsturb (DND) Overrlde:
selected stations can be provided with
IND override capability. This capability
rllows the station to override a do not
disturb condition and ring a station
operating in that mode.
VOTE: Executive...
Start reading Comdial DIGITECH Digital Telephone System Instructions Manual

Related Manuals for Comdial DIGITECH Digital Telephone System Instructions Manual

All Comdial manuals