Comdial DIGITECH Digital Telephone System Instructions Manual

IPress ITCM +# # 7 4 6 +# for base level.I
:EATURE DESCRIPTION
iystem Alarm Report Station: When
18 system has been arranged to report
darms, use this programming feature to
nable stations to display the alarm
eports when the station user takes
lpproprtate action.
JOTE: Also enable system alarm
reporting.See page 
4- 10.
ill-Call and Zone Paglng: Stations can
eceive voice announcements through
he telephone speaker, or through an
external paging speaker connected to a
aA port, and transmit voice...

k&s ITCM % # 7 4 6 +k for base level.FEATURE DESCRIPTION
Jrlme Llne (also prlme group or prime
ntercom): A preprogrammed group of
ines, an intercom line, or one individual
ine can be designated to a particular
;tation where it is automatically selected
or use when that station is taken
>ff-hook.
Flexlble Rlnglng Asslgnments: Ringiryassignments are programmed on a per
station/per line basis. Ringing is
controlled for every line that has
appearance at a station. Immediate, or
direct, ringing can be...

Press ITCM +k # 7 4 6 % for base level.
EATURE DESCRIPTION
lexlble Ringing Asslgnments -
Dntinued
light Transfer (of rlnglng): The
attendant can place the system into the
light transfer (of ringing) mode of
lperation. While in this mode of
operation, special line/station ringing
assignments are active. These
assignments are programmed per this
brocedure.
VOTE: Also refer to night transfer
(of ringing) on page 4-75.
TiNTRY CODE AND PROMPTING DISPLAYEFERENCE RECORD
STA/LINE CONFIG.”
?. Dial 2.“DELAY RING...

Press ITCM +k # 7 4 6 +k for base level.
:EATURE DESCRIPTION
Wvacy Release: A line can be made
Ion-private at a particular station while
emaining private at all other stations.
itations can be programmed to
automatically release privacy while on
certain lines. With this arrangement,
Ither stations can join that particular
station whenever it is on the privacy
elease line.
kcess Denied: Access to particular
ines can be denied to certain stations. A
;tation user cannot select a denied line.
I
ENTRY CODE...

f
E
Press ITCM +k # 7 4 6 ++ for base level.
‘EATURE DESCRIPTION
Zall Orlglnatlon Denled: The ability to
rrfginate calls on certain lines can be
denied to individual stations. The ability
o answer incoming calls on these lines
s still allowed.
Idle Llne Preference: With idle line
sreference enabled, taking a station
)ff-hook will automatically connect it to
any assigned and idle line programmed
‘or this purpose.
ENTRY CODE AND PROMPTING DISPLAY
I
REFERENCE RECORD
1. Dial 54.
2. Dial 6.
3. Select line...

System hogrammingIMI 66-083
STATION/LINE CONFIGURATION RECORD 

Press ITCM ?# # 7 4 6 +k for base level.
‘EATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAY
Jon-Square System: Every
)rogrammable buttons at each digital
;tations can be assigned individually
mapped) to select any line assigned to
hat station or to provide other functions.
rhese buttons can be assigned as direct
;tation select (DSS) buttons to provide
tuick access to system stations or
Issigned as idle to provide autodial
juttons for station the user. Idle buttons
31,B2, andB3orA14,A15andAl6
ierve as...

l-
PrY ITCM % # 7 4 6 ++ for base level.
:EATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
.lnes To Buttons - continued6. Dial # to finish button mapping.1 SEE CHART ON PAGE 4-49I
7. Select station port to be programmed:
- Station 10 - 57: Dial 10 - 57.
8. Dial 5 for further line/button assignment.
-OR-
Dial 
% t for next button mapping feature.
-OR-
Dial 
++r # # for configuration mode.
\sslgn DWBLF Selectlon To Buttons1. Dial 56.“BUTTON MA PPlNG ”
2. Dial 03.w ASSIGN DSSIBLF ’
3....

Press ITCM * # 7 4 6 +k for base level.I
FEATURE DESCRIPTION
Wultlple Intercom Button: Stations can
)e programmed to provide a second
ntercom button.
Wvacy Button: Stations can be
lrogrammed to provide a privacy button.
4 user engaged in a 
private call can
lress the privacy button to change the
:urrent call into a non-private one.
I
ENTRY CODE AND PROMPTING DISPLAY
1. Dial 55.“BUTTON MAPPING ’
2. Dial 05.“ASSIGN 2ND ITCM ’
3. Select button to be programmed:
- Press Al - A14,Bl - 86.
4. Select station...