Comdial DIGITECH Digital Telephone System Instructions Manual

Press ITCM 3F # 7 4 6 % for base level.I
FEATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAY
rolce Announce Blocklng: This feature
allows a station user to block voice
announced intercom signalling.
System Speed Dlal Toll Restrlctlon:
When this feature is enabled, previously
programmed toll restriction tables that
are assigned to a station are applied to
system speed dial calls when they are
made from the station.
1. Dial 53.“STATION FEATURES”
2. Dial 04.“VOICE BLOCK
3. Select station ports to be...

Press ITCM +% # 7 4 6 % for base level.
FEATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
I
lessage Walt Orlglnate: A station that
programmed with this feature can
Dntrol the message waiting light at othe
lations in the system.
IOTE This feature must be
programmed at a station that is
designated as a central
message desk per 
the
procedure below.
ientral Message Desk: One station in
18 system can be designated as the
‘entral message desk and be arranged
Dr exclusive messaging waiting...

lnglng Llne Preference:A ringingline
ill automatically be answered when a“RING 
LINE PREF. ”
ation is taken off-hook.3. Select station ports to be programmed:
- Station 10 - 57: Dial 10 - 57.
4. Dial 
+Ic for next station feature.
Dial 
+Ic % for configuration mode.
“STATION FEATURES”
“SERVICE OBSERVE 
”
IISO be arranged so that they cannot be- Station 10 -57:Dial10 - 57.
serviced observed.
4. Dial + for next station feature.
VOTE: Executive override, as detailed
on page 4-24, is automaticallyDial % +Ic...

Press ITCM % # 7 4 6 +# for base level.
FEATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAY1
 REFERENCE RECORD
Wtomatlc Hold: With this feature
mabled, pressing another line button
vhile already on a line call will
Momatically place this existing call on
told.
Automatic Hold For Intercom: With this
feature enabled, pressing another
intercom button or line button while
already on an intercom call will
automatically place this existing call on
hold.
1. Dial 53.“STATION FEATURES”
2. Dial 
11.“AUTO HOLD ”
3....

f
c
Press ITCM +k # 7 4 6 % for base level.
‘EATURE DESCRIPTION
ieadset Interface: 
A station port can be
mabled to allow headset operation.
Personal Rlnglng Tones: A station can
oe programmed to ring in one of four
distinctive tones:
1.668/571 Hz @ 16 Hz warble
2.1000/800 Hz @ 18 Hz warble
3.666/571 Hz @ 23 Hz warble
4.1000/800 Hz @ 23 Hz warble
ENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
1. Dial 53.
2. Dial 13.
“HEADSET MODE
3. Select station ports to be programmed:
- Station 10 - 57: Dial 10 -...

Press ITCM ++ # 7 4 6 % for base level.
“GRP. CALL PICKUP”4. Dial 1 -4forgp. 
1 -4“GROUPX w
5. Select station ports to be programmed:
- Station 10 - 57: Dial 10 - 57.
6. Dial * for next group
Dial 
t +K for next station feature.
Dial 
* +K * for configuration mode.
NOTE: To remove station from group, assign i? to group 0.
ntercom Hunt Group: Stations can be“STATION FEATURES”
“ITCM HUNT LINK ”
station to ring.
4. Select second linking station
- Station 10 - 57: Dial 10 - 57.
5. Disable a link, if desired,...

Press ITCM ++ # 7 4 6 % for base level.I
Direct Department Calllng: Stations
can be grouped by department to allow a
call to search for an idle station within a
department if a busy or RNA is
encountered at a called station. There
can be up to four departments with up to
16 stations in each one. One additional
station can be placed in each
department to serve as a termination
station. Calls that roll to a termination
station will follow a call forward if it is set
at that station.
NOTE: See page 4- 18...

rI-
F:EATlJRE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
C:all Forward On BusylRlng - No
P
swer (RNA): Call forwarding of busy,
aInd ring-no answer calls to a particular
S‘tation can be automatic. As such, it
S#ends those calls to any idle station
aassociated either by intercom hunt group
alr by department with the called station.
1Jse this feature to arrange for calls to
C:ycle rapidly through such associated
sstations testing each one in turn with
S;everal rings.
IVOTE: Also program...

Press ITCM +K # 7 4 6 % for base level.
FEATURE DESCRIPTION
secure Off-Hook Voice Announce
ISOHVA) Dlsable: The SOHVA feature
s standard for every digital telephone
station. The feature can be disabled with
his programming selection.
Secure Off-Hook Voice Announce
(SOHVA) Groups: 
Arrange the ability of
a station port to originate and/or receive
SOHVA calls by assigning SOHVA
calling groups to station ports. Certain
station ports can be arranged together
for SOHVA calling between one another
while other...

Press ITCM +# # 7 4 6 % for base level.
:EATlJRE DESCRIPTION
Iata Security Port: While port is active
n a call, this feature prevents any
rcoming tones associated with other
ystem features from interrupting the call
.CD Speakerphone Dlsplay of Costed
:alls: When call costing is being
employed with the system, an LCD
ipeakerphone can be programmed to
lisplay the cost of a call as it Is made
mm the station.
INTRY CODE AND PROMPTING DISPLAY
I. Dial 53.“STATION FEATURES*
3. Dial 26.“DATA SECURE PORT”
3....