Canon printer PIXMA MG6620 User Manual
Have a look at the manual Canon printer PIXMA MG6620 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Writable from LAN PCThe card slot is used as the memory card drive of a computer connected to the machine via a network. Data can be written on the memory card from the computer. Not writable from PC The card slot is used only for reading. Be sure to select this mode when printing photos from amemory card. Important • When Writable from USB PC or Writable from LAN PC is selected, the auto power off setting is inactive. For details on the auto power off setting: About ECO settings Important • If you use the card slot as the memory card drive of the computer, you need to perform a "safe removal" operation on your computer before physically removing the memory card from your machine. Right-click the Removable Disk icon and click Eject. If Eject is not displayed on the screen, confirm that the Access lamp is not flashing and remove the memory card. Over a network, the removal operation is not needed. 261
Information about Network Connection Useful Information about Network Connection 262
Useful Information about Network Connection Default Values Set at Factory (Network) Connecting the Machine to the Computer Using a USB Cable When Detecting the Printers Have the Same Name during Setup Connecting to Other Computer with LAN/Changing the Connection Method from USB to LAN Printing Out Network Setting Information 263
Default Values Set at Factory (Network)Default Values of the LAN ConnectionItemThe defaultChange LANDisable LANSSIDBJNPSETUPCommunication modeInfrastructureWireless LAN securityDisableIP address (IPv4 )Auto setupIP address (IPv6 )Auto setupSet memory card sharingEnableSet printer name *XXXXXXXXXXXXEnable/disable IPv6EnableEnable/disable WSDEnableTimeout setting1 minuteEnable/disable BonjourEnableService nameCanon MG6600 seriesLPR protocol settingEnablePictBridge communicationEnableWireless LAN DRX settingEnable
("XX" represents alphanumeric characters.)
* The default value in this item varies by machine. You can check the value in this item using the operation panel on the machine.
LAN settings
Default Values of the Access Point Mode
ItemThe defaultSSID (access point name)XXXXXX-MG6600seriesWireless LAN securityWPA2-PSK (AES)PasswordSerial number of the machine
(XXXXXX is the last six digits of MAC address of the machine.)
264
Connecting the Machine to the Computer Using a USB CableConnect the machine and the computer using a USB cable as the illustration below. The USB port is located on the rear of the machine.265
When Detecting the Printers Have the Same Name during SetupWhen the printer is detected during setup, you may see multiple printers of the same name on the detectionresult screen. Select a printer with checking the MAC address or the serial number set to the printer against that on the detection result screen. Note • A serial number may not be displayed on the detection result screen. To check the MAC address of the printer, print out the network setting information using the operation panel of the printer. Printing Out Network Setting Information Additionally, you can check the network setting information on the touch screen of the printer. Select WLAN setting list from Confirm LAN settings in LAN settings under Device settings , and check the item displayed on the touch screen. LAN settings 266
Connecting to Other Computer with LAN/Changing the Connection Method from USB to LAN To add the computer connecting the machine with LAN or to change the connection method between the machine and the computer from USB to LAN, perform setup with the Setup CD-ROM or perform it according to the instructions on our website. Connecting to Other Computer with LANTo add the computer connecting the machine with LAN, perform setup with the Setup CD-ROM orperform it according to the instructions on our website. Changing the Connection Method from USB to LAN To change the connection method to LAN while you are using the machine with USB connection, perform setup again with the Setup CD-ROM or perform it again according to the instructions on our website and select Change Connection Method .267
Printing Out Network Setting InformationYou can print out the current network settings of the machine using the operation panel of the machine. Important • This print out contains valuable information about your computer. Handle it with care. 1. Make sure that the machine is turned on. 2. Load a sheet of A4 or Letter-sized plain paper. 3. Flick the HOME screen, then tap Setup . Using the Operation Panel The menu screen is displayed. 4. Tap Device settings . 5. Tap LAN settings . 6. Tap Confirm LAN settings . 7. Tap Print LAN details . 8. Tap Yes. The machine starts printing the network setting information. The following information on the machine's network setting is printed out. ItemExplanations of the itemSettingWireless LANWireless LANEnable/DisableConnectionConnection statusActive/InactiveMAC AddressMAC AddressXX:XX:XX:XX:XX:XXSSIDSSIDSSID of the wireless LAN/SSID of the access point modePasswordPasswordPassword of the access point mode (8 to 10 alphanumeric characters)Communication ModeCommunication ModeInfrastructure/Access Point ModeChannel *1ChannelXX (1 to 13)EncryptionMethod of the Encryptionnone/WEP/TKIP/AESWEP Key LengthWEP Key LengthInactive/128/64 268
AuthenticationMethod of the Authenticationnone/auto/open/shared/WPA-PSK/WPA2-PSKSignal StrengthSignal Strength0 to 100 [%]TCP/IP VersionTCP/IP VersionIPv4 & IPv6/IPv4IPv4 IP AddressSelected IP Address (IPv4)XXX.XXX.XXX.XXXIPv4 Default GatewayDefault Gateway (IPv4)XXX.XXX.XXX.XXXSubnet MaskSubnet MaskXXX.XXX.XXX.XXXIPv6 IP Address *2Selected IP Address (IPv6)XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXIPv6 Default Gateway *2Default Gateway (IPv6)XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXSubnet Prefix Length *2Subnet Prefix LengthXXXIPsec *3IPsec settingActiveSecurity Protocol *3Method of the Security ProtocolESP/ESP & AH/AHWireless LAN DRXDiscontinuous reception
(wireless LAN)Enable/DisableOther SettingsOther settings-Printer NamePrinter namePrinter name (Up to 15 alphanumeric characters)Shared Memory CardMemory card sharingEnable/DisableWSDWSD settingEnable/DisableWSD TimeoutTimeout1/5/10/15/20 [min]LPR ProtocolLPR protocol settingEnable/DisableBonjourBonjour settingEnable/DisableBonjour Service NameBonjour service nameBonjour service name (Up to 52 alphanumeric
characters)PictBridge Commun.PictBridge CommunicationEnable/DisableDNS ServerGetting DNS Server
automaticallyAuto/ManualPrimary ServerPrimary server addressXXX.XXX.XXX.XXXSecondary ServerSecondary server addressXXX.XXX.XXX.XXXProxy ServerProxy Server settingEnable/DisableProxy PortSpecifying Proxy Port1 to 65535Proxy AddressProxy AddressXXXXXXXXXXXXXXXXXXXX
("XX" represents alphanumeric characters.)
269
*1 Depending on the country or region of purchase, one of the channels from 1 to 11 is printed. *2 Only when IPv6 is enabled, the status of the network is printed. *3 Only IPv6 and the IPsec setting are enabled, the status of the network is printed. 270