Canon printer PIXMA MG6620 User Manual
Have a look at the manual Canon printer PIXMA MG6620 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Note• The effects of the quiet mode may be less depending on the print quality settings.231
Changing the Printer Operation ModeIf necessary, switch between various modes of printer operation. The procedure for configuring Custom Settings is as follows: Custom Settings 1. Open the printer driver setup window 2. Make sure that the printer is on, and then click Custom Settings on the Maintenance tab The Custom Settings dialog box opens. Note • If the printer is off or if communication between the printer and the computer is disabled, an error message may appear because the computer cannot collect the printer status. If this happens, click OK to display the most recent settings specified on your computer. 3. If necessary, complete the following settings: Prevent paper abrasion The printer can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion. Check this check box to prevent paper abrasion. Align heads manually Usually, the Print Head Alignment function on the Maintenance tab is set to automatic head alignment, but you can change it to manual head alignment. If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment . Check this check box to perform the manual head alignment. Uncheck this check box to perform the automatic head alignment. Prevent paper double-feed Select this check box only if the printer is feeding multiple sheets of plain paper at the same time. Important • Using this function slows down the print speed. Rotate 90 degrees left when orientation is [Landscape] On the Page Setup tab, you can change the rotation direction of the Landscape in the Orientation . To rotate the print data 90 degrees to the left during printing, select this item. To rotate the print data 90 degrees to the right during printing, clear this item. Important • Do not change this setting while the print job is displayed in the print wait list. Otherwise, characters may be omitted or the layout may become corrupt. 232
Don't detect mismatch of paper settings when printing from computerWhen you print documents from your computer and the paper settings on the printer driver and the printer do not match, this setting disables the message display and allows you to continue printing. To disable detection of paper setting mismatches, select this check box. Ink Drying Wait Time You can set the length of the printer rest time until printing of the next page begins. Moving the slider to the right increases the pause time, and moving the slider to the left decreases the time. If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time. Reducing the ink drying wait time speeds up printing.4. Apply the settings Click OK and when the confirmation message appears, click OK. The printer operates with the modified settings hereafter. 233
Changing the Machine Settings on the LCD Changing the Machine Settings Using the Operation Panel Print settings LAN settings Device user settings PictBridge print settings Language selection Home screen background color Firmware update Cassette settings Reset setting About ECO settings About Quiet setting Using the Machine with the Access Point Mode 234
Changing the Machine Settings Using the Operation PanelThis section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example.1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap Setup . Using the Operation Panel 3. Tap Device settings . The Device settings screen is displayed. 4. Tap the setting item to adjust. The setting screen for the selected item is displayed. 5. Tap the setting item. 6. Tap the setting to specify. 235
You can select the setting menus below. Print settings LAN settings Device user settings PictBridge print settings Language selection Home screen background color Firmware update Cassette settings Reset setting Note • You can use the machine considering the environment, such as setting 2-sided printing as default orenabling the machine to turn on/off automatically. About ECO settings • You can reduce the operating noise when printing at night. About Quiet setting 236
Print settings• Prevent paper abrasion Use this setting only if the print surface becomes smudged. Important • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality. • Extended copy amount Selects the amount of image that extends off the paper when printing in borderless (full). Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You can change the width to be cropped from the borders of the original image as needed. Cropped area will be larger if Extended amount: Large is selected. Important • This setting can be applied under the following conditions: - Performing borderless copying - Borderless is selected for Border when copying printed photos Note • If printouts contain margins even though you are printing in Borderless, specifying Extended amount: Large for this setting may help solve the problem. • Auto photo fix setting When ON is selected, you can select whether to print photos using the Exif information recorded in the image files in the following cases. ◦ Auto photo fix is selected for Photo fix when printing from a memory card. ◦ The print setting on the PictBridge (Wireless LAN) compliant device is set to Default* or On when printing with a PictBridge (Wireless LAN) compliant device. * When Default is selected for the print setting on the PictBridge (Wireless LAN) compliant device, select Auto photo fix for Photo fix in PictBridge print settings . • Prevent paper double-feed Select ON to prevent double-feed of plain paper. Important • Select ON only when double-feed of plain paper occurs. • Adjust horizontal print position Adjusts the print position when the left/right margins are not aligned. You can adjust the left/right margins in increments of 0.003 inches/0.1 mm between -0.1 inches/-3 mm and +0.1 inches/+3 mm centered on the horizontal center of the paper. 237
Important• For Letter-sized or Legal-sized paper, you can adjust the left/right margins between -0.05inches/-1.5 mm and +0.05 inches/+1.5 mm even if you specify the value over 0.05 inches/1.5 mm.238
LAN settings• Change LAN Enables either wireless LAN or access point mode. You can also disable wireless LAN or access point mode. • Wireless LAN setup Selects the setup method for wireless LAN connection. Note • You can also enter this setting menu by selecting WLAN on the HOME screen. In this case, enable wireless LAN. When this menu is selected, the machine starts searching for a WPS-compatible access point. If the machine detects the access point, follow the on-screen instructions to set up wireless LAN. If an access point is not detected or if you select another setup method, select one of the setup methods below. ◦ Standard setup Select when you perform settings for wireless LAN manually using the operation panel of the machine. ◦ WPS (Push button method) Select when you perform settings for wireless LAN using an access point supporting a Wi-Fi Protected Setup (WPS) push button method. Follow the on-screen instructions during setup. ◦ Other setup Advanced setup Select when you perform settings for wireless LAN manually. You can specify multiple WEP keys. WPS (PIN code method) Select when you perform settings for wireless LAN using an access point supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup. Cableless setup Select if you specify the settings of the access point information to the machine directly from adevice (such as a smartphone) without operating the access point. Follow the on-screen instructions of the connecting device for the setup procedure. • Confirm LAN settings The list of wireless LAN settings or the access point mode of this machine is displayed on the touch screen. You can print the list from this setting menu. ◦ WLAN setting list The list of wireless LAN settings of this machine is displayed on the touch screen. The following setting items are displayed. ItemsSettingConnectionActive/InactiveSSIDXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX 239
Communication modeInfrastructureChannelXXWireless LAN securityInactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)IPv4 addressXXX. XXX. XXX. XXXIPv4 subnet maskXXX. XXX. XXX. XXXIPv4 default gatewayXXX. XXX. XXX. XXXIPv6 addressXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXXIPv6 subnet prefix lengthXXXIPv6 default gatewayXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXXMAC addressXX:XX:XX:XX:XX:XXIPsec settingsEnable (ESP)/Enable (ESP & AH)/Enable (AH)/DisablePre-shared keyXXXXXXXXXXXXXXXXPrinter nameXXXXXXXXXXXXXXXBonjour service nameXXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
("XX" represents alphanumeric characters.)
◦
AP mode setting list
The list of access point mode settings of this machine is displayed on the touch screen. The following setting items are displayed.
ItemsSettingConnectionActive/InactiveSSIDXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXPasswordXXXXXXXXXXCommunication modeAccess point modeChannel3Wireless LAN securityInactive/WPA2-PSK(AES)IPv4 addressXXX. XXX. XXX. XXXIPv4 subnet maskXXX. XXX. XXX. XXX
240