Canon printer MAXIFY MB2320 User Manual
Have a look at the manual Canon printer MAXIFY MB2320 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1754Cause The ink tank is not installed properly. Action Open the front cover. Then push the ink tank. After installing the ink tank properly, close the front cover. If the problem is not resolved, contact the service center. Important • The ink tank that was once installed cannot be removed until the ink runs out. 1061
1755Cause The ink has run out. Action To maintain both machine and print quality, the machine cannot continue printing under the ink out condition. Cancel printing and replace the ink tank before printing again. Important • Do not remove an ink tank until a new one is prepared to be installed. • Once you remove an ink tank, the machine will not operate until a new one is installed. • Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled. Note • Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink is replaced. You must manually print out faxes that were stored in the memory. 1062
1872Cause The cassette 1 is not inserted. Action Insert the cassette 1. Note • The cassette paper information registration screen is displayed after inserting the cassette 1. Register the cassette paper information according to the paper you loaded in the cassette 1. • If you want to cancel printing, press the machine's Stop button. 1063
1873Cause The cassette 2 is not inserted. Action Insert the cassette 2. Note • The cassette paper information registration screen is displayed after inserting the cassette 2. Register the cassette paper information according to the paper you loaded in the cassette 2. • If you want to cancel printing, press the machine's Stop button. 1064
1874Cause The cassette 1 and the cassette 2 are not inserted. Action Insert the both cassettes. Note • The cassette paper information registration screen is displayed after inserting the cassettes. Registerthe cassette paper information according to the paper you loaded in the cassette 1 and the cassette 2. • If you want to cancel printing, press the machine's Stop button. 1065
1890Cause The protective material for the print head holder or the tape may remain attached to the holder. Action Open the front cover, then confirm that the protective material or the tape does not remain attached to the print head holder. If you find the protective material or the tape remains attached, remove it, then close the front cover. If the problem is not resolved, contact the service center. 1066
2001Cause The device incompatible with the machine is connected. Action Check the device connected to the USB flash drive port. Printing photos directly is possible with a USB flash drive.1067
2002Cause An unsupported USB hub is connected. Action If a USB flash drive is connected to the machine through the USB hub, disconnect the hub from the machine. Connect a USB flash drive directly to the machine.1068
2111Cause The paper settings for printing or copying are different from the cassette paper information registered to the machine. Note • For details on the proper combination of paper settings you can specify by the printer driver or on the touch screen: Setting the Media Type with the Printer Driver and on the Printer (Windows) Setting the Media Type with the Printer Driver and on the Printer (Mac) Setting the Paper Size with the Printer Driver and on the Printer (Windows) Setting the Paper Size with the Printer Driver and on the Printer (Mac) • For copying, specify the paper settings for copying so that they match the cassette paper information. • For details on the cassette paper information registering to the machine: Paper setting for Printing (Windows) Paper setting for Printing (Mac) Paper setting for Printing (Smartphone and so on) If the paper settings for printing or copying are different from the cassette paper information registered to the machine as the following, a message is displayed on the touch screen. • Print settings specified on the printer driver: Paper size: B5 Media type: Plain paper • Cassette paper information registered to the machine: Paper size: A4 Media type: Plain paper Print settings specified for printing or copying is displayed below the message. Action Tapping OK on the touch screen, the following screen is displayed. 1069
Select what to do as necessary. Note • Depending on the setting, the choices below may not be displayed. Print with paper in cass. settings Select if you want to print on the paper loaded in the cassette 1 without changing the paper settings. For example, when the paper setting for printing or copying is B5 and the cassette paper information registered to the machine is A4, the machine starts printing or copying with B5 on the paper loaded in the cassette 1. Replace the paper and print Select if you want to print after replacing the paper of the cassette 1. For example, when the paper setting for printing or copying is B5 and the cassette paper information registered to the machine is A4, you load B5 sized paper in the cassette 1 before you start printing or copying. The cassette paper information registration screen is displayed after replacing the paper and inserting the cassette 1. Register the cassette paper information according to the paper you loaded in the cassette 1. Note • If you do not know what paper information to register to the machine, press the Back button when the screen to select the operation is displayed. When the previous screen is displayed, confirm the paper size and the media type, then register them to the machine. • For details on the proper combination of paper settings you can specify by the printer driver or on the touch screen: Setting the Media Type with the Printer Driver and on the Printer (Windows) Setting the Media Type with the Printer Driver and on the Printer (Mac) Setting the Paper Size with the Printer Driver and on the Printer (Windows) Setting the Paper Size with the Printer Driver and on the Printer (Mac) Cancel Cancels printing. Select when you change the paper settings specified for printing or copying. Change the paper settings, then try printing again. 1070